ReviewsBias Voltage

Texas Instruments LM358P Low Power Dual OP Amplifier, General Purpose, 8-Pin, -16-32 Volt, 9.81 mm L x 6.35 mm W x 4.57 mm H (Pack of 15)

Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.

【Bias Tape Maker Set】What you get: Green 1/4 inch, Orange 3/8 inch, Yellow 1/2 inch, Red 3/4 inch, Blue 1 inch in 5 Pieces Bias Tape Makers.
【Single/ Double Fold Bias Binding】1/4'' Bias Tape Maker, 1/2'' Bias Strip= 1/4'' Single Fold Bias Tape= 1/8'' Double Fold Bias Tape, Single-fold bias tape can be ironed in half lengthwise to make double-fold bias tape, it's a really handy addition to the sewing tool kit..
【How To Use Bias Tape Maker】Cut the front of the cloth strip into 45°, cut the front end of the cloth strip into a triangle shape for placement, enter from the big end of the tape maker exit from the small end. Pull out the cloth strip and press it with flatiron for better effect..
【Make Bias Tapes in Minutes】Fabric Bias Tape maker kit helps you fold the fabric into perfect halves automatically and help you make bias tapes in minutes. Easily DIY your own bias tape to make quilt binding seams, sewing, serging, crafting, fishing, and little projects, like placemats, bibs, armhole, neckline, applique and so on..
【Customer Service】if you have any issues, pls contact us at once. We will be more than happy to solve your problem..

Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator.
Low Input Offset Current: 3 nA (Typical).

♥Introduction: The AD620 is a low-cost, high-accuracy instrumentation amplifier that requires only one external resistor to set the gain over a gain range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: ....

LNKA Bias Tape Maker 50MM(2inch) For Sewing Quilting Tools 1pcs.
Create your own bias tape with the bias tape maker. Simple and Easy. Your creation will look professional with clean finished product from homemade napkins, handbag, bibs and etc...
Bias Tape Maker simplifies creating your own bias tape. Just insert your fabric strip and pull through the end to make an even, consistent bias tape.
Small and simple, yet big in convenience. Make bias tape as easy as 1-2-3. Just slip the tape in one end and pull it out the other as you iron. 50mm tool makes 2" wide bias tape..

V8 is Global voltage standard ( 100V~240V ) is working.
V8 DIY tester can measures the cathode current of the power tube for bias reading (at low voltage side of the tubes ).
V8 suitable for EL34 KT88 6L6 6V6 5881 6550 KT66 KT100 KT120 7027 etc..
V8 can get the reading direct from the current meter. It does not need any convert from mV to mA..
V8 use LED Amp Meter Ammeter Current Panel. Better performance than LCD..

Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator.
Low Input Offset Current: 3 nA (Typical).

COMPLETE BIAS TAPE SET: This bias tape makers set of 4 sizes including 6mm,12mm,18mm, 25mm binding maker, four fixing clips, a wooden awl, 50 pieces positioning pin, and one adjustable bias binder foot, which can meet your needs for making bias tapes..
VERSATILE: The sewing awl can take the cloth strip and untie cloth strip knot. Four different fabric bias tapes, you can choose which one you need according to the situation. And you can secure the tissue or the cloth with the bead needles..
BOX: You can put all of the bias tape maker tools into it, which can not only save the space, but also prevent any loss. This convenient binder maker kit help you fold fabric into perfect halves automatically and can help you make bias tapes in minutes instead of hours..
STANDARD SIZE: Fit in majority of sewing machines like Haitral, brother, babylock, janome, Kenmore, singer, Juki, so you can buy this binding tape maker kit at ease..
USAGE: 1.Make cloth strip:Basing on the width which you need, cut pieces of parallel cloth strips on the 45 degree angle. 2.Let the back of the bias tapes upward, let cloth strip into the wide mouth, and use awl to pull the cloth strip from the head of bias tape. 3.Let the positioning needle to fixed the pulled cloth strip on the scalding....

Rail-to-Rail Output, Specified Temperature Range: Industrial Grade: −40°C to 125°C.
Wide Bandwidth: 3 MHz, Input Bias Current: 1 pA.
High Slew Rate: 2.4 V/µs, Input Noise Voltage: 39 nV/√Hz.
Supply Voltage Range: 2.7 V to 16 V, Supply Current: 550 µA/Channel.
Example Applications: E-Bike, Power Banks, Smoke detectors, Solar Inverters, Low-Power Motor Controls, Battery-Powered Instruments, Building Automation.