ReviewsBig Diameter Flange

MENNTY Toilet Flange with Wax Ring for Toilets Replacement Kit includes Bolts PVC Toilet Flange Repair Kit for 3" or 4" Pipes, Fit Toilet Install & Repair

[Fits 3-inch or 4-inch Waste Lines] Toilet flange with wax ring for any NEW installation or REPAIR on 3-inch and 4-inch waste lines/ drain opening. Toilet wax ring replacement kit made repairing a leaky or wobble toilet and cracked flange easy..
[Easy to install, without the help of a plumber] Install toilet flange repair kit at or above floor level,without the help of a plumber can be repositioned without damaging seal.
[Assures a Perfect Seal]This toilet wax ring provides good deodorization and high viscosity, and is easy to form an airtight, deodorant, and waterproof seal and perfect solution to deal with unpleasant odors and leaks caused.
[Product Specifications] Toilet flange-diameter:6.88 in,thickness:0.43 in.Toilet wax ring-diameter:5.4 in,thickness:0.92 in.Package includes bolts, washers, retainers, nuts and bolt caps..
[Service] If you are installing of new floor mount toilet install or repair the old toilet,choose our toilet flange with wax ring. We always focus on product design and customer service.30-Day full refund and 1-Year Limited Service for you..

Check Stock

maXpeedingrods New GT35 GT3582 Turbo Charger Anti-Surge Compressor AR.70/63 600HP Universal Turbocharger External Wastegate T3 Flange for 2.5L-6.0L Engines Water + Oil Cooled

【Applications】:Perfect for all 4/6 cylinder 2.5L-6.0L engines. Bigger HP Applications,capable of Boosting Horse Power up to 600HP.
【Thread Size】: Oil Drian/Outlet （M8*1.25）；Oil Feed/Inlet（M10*7/16-24）；Water Inlet/Outlet （M14* 1.5）.
【Specifications】: Exhaust Inlet Flange: T3 Flange / Exhaust Outlet Flange: 4 Bolt (Size: 3")/ Wastegate: External Wastegate.
【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the....

Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.

Check Stock

Vintage Forge Chrome String Through Body Ferrules for Electric Bass Guitar (Set of 4) SF180-CHR

PROFESSIONAL QUALITY - String-thru Body Bass Guitar Ferrules (4) in Chrome Finish.
COMPLETE SET - Include four (4) ferrules.
DIMENSIONS - Total Height: 9/16 in. (14.1mm) Shaft Depth: 1/2 in. (12.8mm) Shaft Diameter: 3/8 in. (9.6mm) Flange Diameter: 15/32 in. (12mm) Flange Height: 3/64 in. (1.2mm) Interior Diameter: 5/16 in. (7.8mm).
BRAND NEW - Vintage Forge Factory Fresh Packaging.

Check Stock

ALLOYPRO 60pcs Large flange blind rivets Aluminum,Flange Diameter 5/8 16 mm ,Pop Rivets Assortment Kit Blind Rivet by Bolt Dropper,3/16 x 5/8 Inch,grip range 8-12mm

Material: Aluminum alloy rivet body, corrosion-resistant, never rust,our hardware is very strong , good stability and long service life..
Large flange: Large flange has stronger riveting force, larger supporting surface and special protection for soft materials. It is suitable for fixing soft surface materials and splicing objects in various indoor and outdoor scenes..
Dimensions: Hole 3/16 inches (4.8 mm), length: 5/8 inches (16 mm), outer diameter of large flange: 5/8 inches (16 mm). Recommended grip range: 3/16 inch (4.8 mm) diameter, recommended riveting thickness: 1/3 inch-1/2 inch (8-12 mm)..
Quality: Good workmanship, thick and stable riveting body, smooth core pulling, fastness and durability..
Packing: 60pcs，3/16"x5/8"(4.8x16 mm) blind rivets with large aluminum flange..

Check Stock

Deluxe Beach Umbrella Sand Anchor | Sand Auger | Umbrella Holder for Strong Winds | One Size Fits All w Mesh Carry Bag

HEAVY DUTY ULTIMATE BEACH UMBRELLA SAND ANCHOR: ONE UNIVERSAL Size for all beach umbrellas with pole diameter of upto 1.5".
UPGRADED to 5 level WIDE spiral flange compared to 2-3 flanges or same width shaft from top to bottom from other brands..
EASY INSTALL BEACH UMBRELLA SAND AUGER: It remains firmly in the sand, or soft ground, to secure a beach umbrella against winds upto 50 mph.
Metal anchors rust from the sand and salt of the ocean, get hot in the sun, and are sharp and dangerous. This sand anchor from BeachMall is made with sturdy ABS Plastic, that is stronger than metal and will last longer..
STURDY & DURABILITY: Its wide spiral flange, built on a round cone shaped shaft, digs easily into sand, mixtures of broken shell, shale, etc..
More sand on each flange makes difficult for the wind to remove the anchor from ground. No hassle of digging holes to install your umbrella! Much easier to install due to taller cone and narrow bottom shape with triangle cut space at each flange to ease rotating the anchor in sand. MUST TRY TO BELIEVE our patent pending anchor!.
EASY SET UP IN JUST SECONDS - Its comfortable h....

Check Stock

Brooklyn Pipe 10 Pack 1/2 Inch Floor Flange Cast Iron Pipe Floor Threaded Pipe Fitting Industrial Steampunk Vintage Retro Decor Furniture DIY Wall Industrial

1/2 INCH PIPE FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to....
SUPPORT AMERICAN BUSINESS - We live and sell in America, please help support our USA small business. We always go the extra mile for our awesome....
INDUSTRIAL DECOR- Our 3 hole flange is 2.5 inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial,....
NO CHINA STAMP - Our forged malleable iron flange doesn't have the word "CHINA" stamped into the flange which is another reason why Brooklyn Pipe....
QUALITY CONTROL - We work directly with steel factories and hire licensed inspectors to review our Brooklyn Pipe products prior to being packaged.....

Check Stock

In Sink and at Your Disposal

Fits most Waste King brand EZ-mount style garbage disposals.
Fits standard sinks with 3-1/2 in. drain opening.
4-1/4 in. rim diameter flange with 2-1/2 in. deep collar.
3-1/4 in. diameter, 1-1/4 in. tall removable stopper with rubber rim included to slow the drain of water in the sink and prevent unwanted debris from....
Solid brass construction for added durability and reliability.
Do not use plumber's putty for installation. Apply Silicone sealant to under side of sink flange.

Check Stock

Plumbing Cover Plates, Escutcheon plate, Stainless Split Flange, Hinged Floor and Ceiling Plates for than 21mm Dia Pipe (Fits 1/2 Inch IPS), Chrome Finish, 6 PCS

Size - The Shower Flange is suitable for pipes of any material less than 21mm in diameter. Please measure your pipe to make sure that it matches the measurements on this product..
Material - The hinged floor and ceiling plate flange cover is made of 304 stainless steel, which has great heat resistance and corrosion resistance, that can be applied for long time use. Chrome Finish..
Easy Installation - The hinged floor and ceiling plate flange cover can be easily installed without experience a hassle-free installation with no expert plumbing skills or tools..
Application - The hinged floor and ceiling plate cover can be applied at the home, office, shopping mall and so on. Also can be installed at kitchen faucets, sinks, toilets, and so on..
Escutcheon flange with tight grip - used to cover and close the gaps between the pipe/ IPS and the inside diameter of the floor or ceiling to avoid damage and leakage..

Check Stock

CS OSBORNE SS-1 STAINLESS STEEL GROMMETS & PLAIN WASHERS PK/144

DIMENSIONS IN INCHES: Hole Size: 13/32 Flange Diameter: .790 Length Under Flange: .205 Metal Thickness: .016 Inside Diameter: .455 Outside Diameter: .790 Metal Thickness: .016.
FAST SHIPPING - Orders are shipped within 1 business day. All orders placed by 2:30pm ET ship same day!.
HIGH QUALITY - All products are rigorously inspected in-house to yield near-zero defect rates. Stimpson has been ISO 9001 certified for over 10 years..
RICH HISTORY - Founded in 1852, Stimpson produces the largest variety of standard and special eyelets, grommets, washers and hole plugs of any single company in the world..
LIFETIME GUARANTEE - No hassle return for any item defects, full replacement of items guaranteed..

Check Stock

Etymotic Research Dual Flange Eartips for use with Etymotic Earphones - 3 Pairs Large 11mm Outer Width

3 pairs of large sized 2-flange ear tips.
Softer, more comfortable, and seals just as well as traditional 3-flange tip.
Fits all brands with an inside diameter of roughly 3mm.

Check Stock