ReviewsBike Push Bar

2 x BIKEHAND Bicycle Floor Type Parking Rack Stand - for Mountain and Road Bike Indoor Outdoor Nook Garage Storage

  • Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes..
  • MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike..
  • FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore..
  • SUPERB DURABLE QUALITY & STUNNING FINISH TO MATCH YOUR BIKE - Heat treated high quality steel with a fantastic powder coated finish. This stand will last forever if used appropriately. FITS NEARLY ALL BIKES: The bike stand will fit almost all....
Check Stock

Spectrum Redshift

  • FITS ALL DROp BAR HANDLEBARS – The Cruise Control Drop Bar Handlebar Grips will easily fit any drop bar, curved or bent handlebar for road, gravel, or fixie bikes. The bicycle handle grips were developed in parallel with our Kitchen Sink Handlebar and together provide the ultimate drop bar comfort..
  • COMFORTABLE AND ERGONOMIC –The Cruise Control bike handlebar grips for drop bar handlebars are designed to give you the ultimate feeling of control and comfort and are the perfect road bike grips, gravel bike grips, or fixie bike drips. They reduce hand and wrist pain and fatigue, allowing you to ride longer and more comfortably..
  • VIBRATION REDUCING – Molded from high-quality Kraton rubber, the padded bike grip shaping eliminates hot spots which can lead to hand pain, adds plush but sturdy cushioning that filters out road buzz and vibrations.
  • CUSTOMIZABLE FIT – The bike handle grips are designed to fit a broad range of hand sizes and the easy-to-use markings allow you to customize the position and fit to your preferences and riding style. Non-slip texture on the drop grips provides confidence in even the wettest conditions..
  • EASY TO INSTALL – These bike accessories make one of the easiest upgrades for maximum comfort! Simply tape the bicycle ha....
Check Stock

Quadratec Adjustable Bike Rack Bar Adapter - Bike Bar Bike Rack Crossbar Adapter Bike Rack Top Tube Adapter Bicycle Bar for Bike Rack Bike Rack Cross Bar Adapter - Adjust from 23.6" to 31.5 inches

  • BIKE RACK EXTENSION BAR - Quadratec's bike frame adapter bar connects to your bicycle seat post and reaches across to the handlebar stem to provide a safe and secure top tube for hanging onto a bike rack carrier.
  • ADJUSTABLE LENGTH - the telescoping design of the bike adapter bar accommodates most standard sized adult and kids bicycles and can be adjusted from 23.6" to 31.5 inches. It can support bikes weighing up to 33 lbs.
  • QUICK-RELEASE BUTTONS - the bike beam bar is spring loaded and features quick-release buttons that provides an easy load and unload process that takes only seconds.
  • BUILT TO LAST - the vinyl coated clamp on the bike crossbar adapter protects your bike from marring and scratching, and the bike cross bar adapter's satin black powder coated finish ensures years of hassle free service.
  • FITMENT NOTES - the bike buddy bar works on bikes with a seat post diameter of 1.185" or 30.1mm or less, but will not fit larger seat post sizes 30.8mm and 31.6mm.
Check Stock

MiiMoo Bike Floor Stand Portable Bike Parking Rack for Storage Indoor/Outdoor, Front and Rear Wheel Parking Rack Stand, Fit for 16\-29\ Kids Bike/Mountain Bike/Road Bike

  • 【Floor Mounted Bike Stand】Safely store your bike in your garage, shed, yard, apartment, basement, home or retail bike shop - without leaning it against the wall, scuffing surfaces or scratching your bike! The bike floor stand can holds the front or back wheel as you like, the non-slip pads can effectively protect your floor. If you use your bikes a lot and don't want to hang them, try this floor bike rack!.
  • 【Suit for Almost All Bikes】Bike floor stand can be appied in 16"-24" kids bike, 26"-29" mountain bike, 650c-700c road bikes. The wide base fits tires up to 3.35" wide bikes, you can park the bike with front or rear wheel. Floor bike rack only touches the tire, it won't scratch bike frame, rims, cassettes etc. Stores your bike safely also keeps your drive chain and delicate components safe..
  • 【Convenient PUSH-IN Bike Stand】Unlike other floor bike rack, you need to lift and put the bike in. Our bike floor stand comes with an easy and quick push in system. The wheel holder will naturally fixed tire when you push the bike into the parking rack, which offers an effortless and smooth parked way for heavy bikes and saves your strength..
  • 【Super Strong Steel Frame】Made of high strength steel, the floor bike stand has excellent toughness and har....
Check Stock

Monkey Bars Gloves 9,10,11 Years Old Kids with Grip Control Parkour Gloves Kids Bike Gloves

  • Monkey bar gloves monkey bars kids bar gloves kids gymnastic gloves bars kids bike gloves girls monkey bar gloves kids monkey bars bar gloves kids....
  • gloves for children monkey bars kids bar gloves kids gymnastic gloves bars kids bike gloves girls monkey bar gloves kids monkey bars bar gloves kids....
  • Cycling gloves monkey bars kids bar gloves kids gymnastic gloves bars kids bike gloves girls monkey bar gloves kids monkey bars bar gloves kids monkey....
Check Stock

ABN Bike Tire Lever Set 3pc Bike Tool Kit Bike Tire Tool, Tire Levers Bicycle Tire Lever Bike Tire Removal Tool Set

  • MAKE TIRE REPAIR SIMPLE: Use the heavy-duty ABN | 3-Piece Bike Tire Levers Set to safely remove tires from your bicycle wheel rims.
  • This bike lever bike repair kit brings simplicity to changing bicycle tires.
  • Each tire pry bar has an 8-inch (20.3cm) shaft and 3.5-inch (8.9cm) long plastic and rubber molded/grooved handle that does not turn in your hand when removing small tires.
  • USE WITH MOST TIRES: Suitable for removing motorcycle tires, small agricultural machinery tires, leisure tires, wheelchair and other solid (airless) tires, tubeless mountain bike tires, smaller standard bicycle road and off-road tires, and even the most stubborn downhill tires.
  • BUILT TO LAST: 8-inch (20.3cm) long drop-forged hardened alloy steel shaft with chrome finish, extra-wide angled, and rounded tip for extra strength and longevity over standard plastic or nylon levers.
  • Typical small bicycle levers are too frail and short to handle surrey wheels and tires that are very heavy-duty with a wire bead and are a moped/motorcycle wheel and tire, but the strength and increased leverage of this lever makes that first downward pull or the last upward push go easily.
  • SPOON TIP: Unlike a bike screwdriver, these bike repair tools will not damage the tire or your hands during use due to....
Check Stock

Monkey Bar Gloves for Girls 5 and 6 Years Old with Grip Control Climbing and Scooter Gloves

  • Monkey bar gloves monkey bars kids bar gloves kids gymnastic gloves bars kids bike gloves girls monkey bar gloves kids monkey bars bar gloves kids....
  • Cycling gloves for kids monkey bars kids bar gloves kids gymnastic gloves bars kids bike gloves girls monkey bar gloves kids monkey bars bar gloves....
  • No more monkey bars blisters monkey bars kids bar gloves kids gymnastic gloves bars kids bike gloves girls monkey bar gloves kids monkey bars bar....
Check Stock

ROADGIVE Bike Wall Mount - Horizontal Bicycle Bike Wall Hanger in Indoor Storage or Garage - Wall Mounted Bike Rack - Adjustable Bike Hanger to Keep Your Bike Level, Wall Bike Rack Hooks for Bicycles with 4.3 Ft Portable Mini Bicycle Lock

  • ★【STRONG AND DURABLE DESIGN:】 Wall mount made from durable aluminum alloy with scratch-proof coating. This bike holder is able to support bike up to 55lbs (25KG) and also fireproof, waterproof, and rustproof.Bike wall hanger’s angle (25°up to 145°) can be adjusted to keep your bike level, catering for different bike frame angles, shapes and sizes..
  • ★【SAVE SPACE & CONVENIENTLY STORE YOUR BIKE:】 Messy garage is one real headache! ROADGIVE Bike Wall Mount is here to keep your garage or indoor space tidy and clutter-free.Highly suitable for apartments, homes, garages and more.Fits most bike types: road, cyclocross, hybrid and MTB..
  • ★【ANTI-SCRATCH DESIGN:】 The double U" shape arm cradles and round cap all made from soft TPR material that will not scratch your bike whether aluminium, titanium, carbon or steel.We have supplied a 4.3 Ft Portable Mini Bicycle Lock to prevent front wheel knocking against your wall..
  • ★【FULLY ADJUSTABLE:】Detailed installation instructions and mounting screws included. Hanger beam can be adjusted to fit all environments and widths of bicycles, extendable from 7.5 inches up to 10.5 inches – secured using secure push button mechanism..
  • ★【INSTALLATION ADVICE:】 The wall mounting bracket should be fixed....
Check Stock

Bike Bicycle Top Tube Cross-bar Frame Adjustable Adapter for Bike Car Rack or Home Storage Stand - Great for Y-Frame Kids Ladies Dual Suspension Cruiser Small Mountain Road Bikes Capacity 15kg/33Lbs

  • DURABLE AND SAFETY: Oversized Diameter Tubing And Anti-rotation Inserts For Greater Stability, Protects Your Bike's Finish With Non-Marking Plastic Clamps. Constructed Of Rust-resistant, Sturdy Steel With Black Powder Coat Finish..
  • DESIGNED FOR USE: Ideal For Mounting Your Bike To A Car Rack Or Home Storage Unit, An Alternative Way Which Allows The Bike Didn't have One Straight Bar Cross, To Have Extra Clearance When Putting Your Bicycle on Hitch Boot Bike Ute Tow Ball Spare Wheel Car Rack or Vertical Home Bike Storage Rack.
  • EASY TO USE: Installs Quickly And Securely To Your Seat Post And Stem To Adopt A Wide Range Of Bikes For Transport, Keeps Your Bike Mounted Solidly On Single And Dual-arm Mounts Attaches To Your Bike's Seat Post And Handlebar Stem Post. Easy Push To Operate Pin And Interlocking Gate Keeps Each Clamp Closed..
  • CAPACITY AND COMPATIBILITY: Adapter That Makes Your Bike Compatible With Most Mast-style Hitch Racks.
  • Bike Capacity: 1 Bike Weighing Up To 33lbs - Great for Kids Ladies Dual Suspension Cruiser Small Mountain Road Bikes and Sloping Down Tubes. Note: DOES NOT FIT if it’s a kids bike that is smaller than 20” wheels OR if the distance from your seatpost to handlebar post is shorter than 58 cm / 22".
Check Stock

YTKD Cycling Bike Safety Trainer Handle for Kids，Balance Push Bar

  • bike training handle is suitable for bicycles with bicycle seat tubes..
  • Parents can use this push bar to help their children learn bicycles..
  • if the inner diameter of the handle holder is more than the bikes seat pipe on which the handle is supposed to be installed，Try wrapping a few laps of tape around the bicycle seat tube..
Check Stock

2 x BIKEHAND Fat Electric E Bike Bicycle Tire Floor Type Parking Rack Stand - for Mountain and Road Bike Indoor Outdoor Garage Storage - Max Tire Width 4"

  • SIMPLE PUSH IN DESIGN - FIT all bikes up with up to 4.0" tires. Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes..
  • MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike..
  • FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore..
  • SUPERB DURABLE QUALITY & STUNNING FINISH TO MATCH YOUR BIKE - H....
Check Stock