ReviewsBike Stand With Telescoping Arm And Tool

CYCLESPEED Bike Repair Stand Quick Release (Max 85 lbs), Home Mechanic Bicycle Mechanics Workstand Adjustable Portable Extensible Tripod Bike Maintenance Rack for Road Mountain Bikes (Black-Red)

  • ...up to 85lbs (38.5 kg). The heavy-duty structure and Triangular protective pads at the bottom ensure that the bike stands enough to support repair and clean your bike.
  • 【FOLDABLE & SAVE SPACE】: This bike maintenance work stand is foldable for saving space. Unfold the stand when you need to repair your bike and The telescoping tube and foldable legs let you pack this portable bike repair stand in the boot of your car for a race or store it away in a corner when not in use. It is easy to use without occupying too much space.
  • 【HEIGHT ADJUSTABLE】: Due to telescopic design and 360-degree rotating, quick release clamp, the height of the bike repair stand can be adjusted from 36”-59”(92cm-150cm) smoothly so that your waist without bending or crouching down causing aches and strains during repair, Adjustable clips are suitable for bicycle tubes up to 2.76”(70mm) and are lined with soft-touch rubber to protect your bike from scratches.
  • 【360-DEGREE SWIVEL CLAMP】: 360-degree swivel clip of the Bike Repair Stand allows your bike to be held in any position, two pivots and height adjustments provide maximum flexibility. It has rubber material, so it will protect your bicycle's paint very well.
  • 【APPLICABLE & WARRANTY SERVICE】: 90-day money-back poli....
Check Stock

GRIFFIN Professional Studio Microphone Boom Stand with Casters | Extended Height Recording Mic Holder Tripod on Wheels | Tall Telescoping Arm Mount & Retractable Legs for Vocals, Choir, Overhead Drums

  • EXTRA LARGE MICROPHONE BOOM ARM - POSITION YOUR MIC UP TO 142 INCHES IN THE AIR: A convenient tripod design and a large diameter main shaft tubing that extends up to 75 inches, you can easily position this studio microphone stand exactly where you need it, without getting in the way. The telescoping mic boom arm extends an additional 72 inches and features a 4 pd counterweight used for large diaphragm mics. Mic mount designed to accommodate any standard microphone clip or microphone holder..
  • FORGET ABOUT TANGLING WIRES ON YOUR MIC STAND BOOM: A convenient cable clip is located along the length of the telescoping boom mic arm, allowing you to neatly tuck away the microphone cable and prevent unsightly tangling. The advanced tilt clutch helps you adjust the mic stand adapter angle effortlessly with a single motion, offering superior comfort and ease, throughout your performances. The tripod mic stands leg spread can also be adjusted from 24" to 29" to offer even greater stability..
  • PACK UP THE MIC ARM STAND & STORE AWAY IN SECONDS: Want to store or transport your tripod mic stand easily without much fuss? No problem. Thanks to the microphone tripod fold-able design with retractable legs, you can easily pack this studio mic sta....
Check Stock

Pit Posse PP2375 Motorcycle Rear Stand Combo Paddock Universal - Heavy Duty - Easy Lift - Fits Most Bikes - Motorcycle Accessories

  • ✅ UNIVERSAL REAR STAND COMBO DESIGN- The universal design fits most swing arm sports bikesand adjusts to fit in an 8-3/4" to 13-3/4" range. This smart motorcycle rear stand is designed to allow the use of standard paddles or spools. Even if your bike doesn't have spools, it's easy to adjust the width of the swing arm holders to your application. Designed with rubber pads to protect the swing arm and prevent scratches and scuffs..
  • ✅ HEAVY CONSTRUCTION & SMART DESIGN- This stand is made of HEAVY DUTY 1.5" O.D.15-gauge metal to guarantee the stand is extremely sturdy. The wall thickness of the tubing is substantial.
  • it will last for years. The stand is easy to assemble, pulls the back wheel totally off the ground for easy chain and wheel maintenance. Perfect for the home garage but compact and light enough to take with you for track days..
  • ✅ 4" BEARING WHEELS FOR EASY LIFT- You have ensured stability with four 4" bearing wheels for smooth movement. The dual wheels provide both a smooth lift and stable platform for working on the bike. There is no need to use force or do the heavy lifting, this stand will lift the rear of your bike of the ground in seconds with little to no effort, and the down transition is equally effortless..
Check Stock

MaxxHaul 80725 Bike Repair Stand/Display with Adjustable Height & 360 Deg Rotating Head Clamp Black Small

  • Clamp head rotates 360 degree for easy positioning and convenience. Clamp will accommodate bike with bike frame from 1" to 1.60" diameter.
  • Working height adjusts from 40" to 75" allowing you to perform repairs while sitting down or standing up. Rubberized clamp grip protects bike surface.
  • 4 adjustable legs with feet keeps stand sturdy & stable. Legs can be folded for compact storage & transportation.
  • Includes front wheel stabilizer & easy to install tool tray. Simple design makes set-up a breeze and effective to use.
  • Maximum weight capacity: 66 lbs. Overall weight: 17.6 lbs. Overall dimensions: 56" x 40" x 40" min height to 75" max height.
Check Stock

SONGMICS Bike Repair Stand with Quick Release, Bicycle Maintenance Rack, Bike Workstand, Adjustable and Portable for Mountain Bikes, Black and Red USBR06B

  • Quality Performance: This pro bike repair stand boasts premium steel tubing and quick release for clamp, height adjustment, and foldable legs, giving you a convenient maintenance experience with top-performing materials.
  • For Convenient Repair Work: Does it fit your bike? Chances are, if you have 1-1.6” tubes and bikes under 66 lb, the answer is, “yes!” This maintenance stand can hold mountain or road bikes firmly and stably.
  • Bring the Work to You: With a 39.8-67.3 inch adjustable height and 360-degree rotating, quick release clamp, our bike repair workstation lets you bring the work to you so you don’t need to bend over backwards, causing aches and strains.
  • Pack It Up: The telescoping tube and foldable legs let you pack this portable bike repair stand in the boot of your car for a race or store it away in a corner, taking up very little space.
  • What’s Included: A bike repair stand with adjustable height and a quick release clamp that secures your bike at the right height and angle for an efficient home-repair experience.
Check Stock

unisky Bike Trainer Stand Indoor Exercise Magnetic Bicycle Training Stand and Maintenance Home Shop Bicycle Repair Stand Height Degree Adjustable Cycle Maintenance Rack

  • DOUBLE LOCK SYSTEM: The two knobs on the left and right of the stationary bike trainer construct the dual locking system, making it easily to lock....
  • STEADY, STABLE AND FIRM: The indoor exercise bike trainer is designed with dual-support structure. The wide frame and front wheel riser block keep it....
  • COMPATIBLE WITH BIKES: The Unisky indoor bike trainer stand fits any road or mountain bike with a 26-28" or 700c wheel. There is no need to buy a new....
  • HEIGHT ADJUSTABLE: The height of the telescoping stand ranges from 36.2” to 59.8”, meeting your needs of bike maintenance conveniently. This bike....
  • 360 DEGREE ROTATING: The quick-release clamp rotates in 360 degree, easy to reach every part of a bike, holding tightly but will not damage the....
Check Stock

Saris Bicycle Racks All Star Tray Style Hitch Rack Mount 2 Bikes Black

  • ALL STAR: A modern two-bike tray rack (21lbs.) utilizing an easy to load platform, adjustable arms securely transport a variety of bike sizes and....
  • COMPATIBILITY: Universal hitch works with 1 ¼” and 2” hitch receivers, ratcheting wheel strap securely holds tires up to 3".
  • CAPACITY: Carries 2 bikes, up to 45 lb each.
  • FEATURES: Adjustable arm and padded hooks secures bike frame, center arm folds down for access to rear of vehicle when not loaded with bikes.
  • MADE IN USA: Hand built in Madison, Wisconsin.
Check Stock

Clothink Bike Repair Stand Maintenance Workstand, Quick Release Height Adjustable with Tool Tray Mechanic Repair Clamp Rack for Mountain Bike Cleaning Display Storage

  • Handlebar Rod -- The handlebar rod will keep the bicycle front wheel in place to reduce rotation and keep balance of your bike. This will make your bike repair work more efficient. A highly functional tool tray is included so you can organize all the small tools you need during the repair..
  • To meet your different height requirement. Don’t need to bend over backwards, causing aches and strains..
  • 360° Rotating Clamp: clamp suitable for bike frames between 25-40mm, it allows your bike to be held in any position. This mount does can hold 66lbs (30kg).
  • Multifunction: Wash your bike / Make bike maintenance for repairing / Dispaly in store / Storage in home or garage. Can holds your electric bike, beach cruiser, mountain bike, trail bike with ease.
  • High Quality Material: Made of steel and plastic, mounting flange has 5 holes, sturdy and stable. You can install this fixed-clamp stand and create a bike repair area in your own home or garage. The sturdy steel bars will hold your bike steady while you work..
Check Stock

Unisky Bike Trainer Stand with Foldable Bike Repair Stand

  • QUICK RELEASE: The handle at the stationary bike trainer not only can release the bike off the trainer quickly by lifting up, but also can lock the....
  • 6 SPEED RESISTANCE: With a remote controller of 6-level speed by a wire, you can change resistance to comply with the cycling conditions you want and....
  • STEADY, STABLE AND FIRM: The indoor exercise bike trainer is designed with dual-support structure. The wide frame and front wheel riser block included....
  • HEIGHT ADJUSTABLE: The height of the telescoping stand ranges from 36.2” to 59.8”, meeting your needs of bike maintenance conveniently. This bike....
  • 360 DEGREE ROTATING: The quick-release clamp rotates in 360 degree, easy to reach every part of a bike, holding tightly but will not damage the....
Check Stock

Mount-It! Dual Monitor Sit Stand Workstation with Gas Spring Arm | Height Adjustable Standing Desk Converter | 2 Integrated USB 3.0 Ports | VESA 75 100 | C-Clamp and Grommet Base

  • DUAL MONITOR SIT STAND WORKSTATION: Double your screen space and improve your health with this active stand up desk converter. Universal VESA mount compatible, will fit monitors up to 27 inches. (VESA 75x75 and 100x100). Tilt and swivel or quickly rotate your monitors independently between portrait or landscape..
  • HEIGHT ADJUSTABLE WORKSTATION: The ergonomic gas-spring arm allows easy and smooth adjustments throughout the day. The sit-stand workstation can be adjusted up to 42.9” and the height of the monitors up to 7.5”..
  • INTEGRATED USB 3.0 PORTS and STORAGE TRAY: Charge your devices quickly with two front USB 3.0 ports and a convenient storage tray to keep your phones and accessories within reach with our stand up desk attachment. The height adjustable keyboard tray and dual monitor arm mount was designed for space efficiency. Push the assembly to the side of your desk to clear up desktop space, when needed. Keyboard tray folds up to save even more space..
  • HEAVY DUTY C-CLAMP AND GROMMET CLAMP: Includes both clamps for mounting versatility, made with heavy-duty steel construction for a sturdier workstation. Fits de....
Check Stock

Oumers Bike Crank Puller Bike Crank Arm Remover + Bottom Bracket Remover + Allen Key Wrench +Square Head + Auxiliary Wrench, Necessary Bicycle Crank Extractor Tool Crankset Arm Remover Repair Tool Set

  • 【Value Bike Crank Removal Tool Set】: Made of high forge steel and hard plastic handle,robust and compact,handy and well appointed.
  • Specifically designed to get the cranks off and clean pedal crank for the home bike mechanic and outdoor riding, can also add it to your toolkit for occasional repair.Huge time and money saver..
  • 【Bike Crank Extractor/Puller】: Bike crank puller can be used with an 16mm spanner wrench. For work great,we recommend that you just make sure to grease the threads before taking off your cranks.Be careful not to cross thread.The crank arm puller tool set is used to remove 22mm thread/square type crank arms, not fit Octalink crankset..
  • 【Bottom Bracket Remover 】: Bike Bottom Bracket Remover can be used with either a 24mm socket, wrench or an adjustable spanner.The bottom bracket remover is used to remove bicycle bottom bracket, it is suitable for any 20 teeth spline type bike bottom bracket..
  • 【Square Head & Allen Wrench】:Bike Allen wrench is used to unscrew the screw of crank.Use a square head,allen wrench and bottom bracket remover to replace old bottom bracket.Place the bike bottom bracket remover into the crankset, then put in the square head and the allen key,use leverage to loosen the old bottom bracket..
Check Stock