ReviewsBilge Alarm

Boat Marine Manual Hand Bilge Waste Water Transfer Pump Qiilu Plastic Handle Marine Manual Diaphragm Hand Bilge Water Pump for Boat Yacht

Excellent Design------Boat Marine Manual Hand Bilge Waste Water Transfer Pump is suitable for compact manual self-priming pump. Provides flow rates up to 12 gallons per minute (45 liters per minute)..
Durable and Reliable------Boat Marine Manual Hand Bilge Waste Water Transfer Pump has a robust and durable construction designed for marine applications. Ideal as a backup bilge pump in case your electronic bilge pump fails..
Specifications------ Manual Diaphragm Pump, Material: ABS, Diaphragm Manual Pump with Two Position Handle, Packing List: 1 x Manual Diaphragm Pump, 2 Adapters, 2 Seals..
Dimensions ------- Hose Inlet: Approx. OD. 1.36" (34.5 mm), Hose Outlet: Approx. OD. 1.36" (34.5mm), Max Suction Lift: Approx. 10ft (3m), Max Discharge Head: 13ft (4m). Flow: 720GPH (2724 LPH).
Easy to use------fixed handle with rubber handle, easy to use. Installation can be done without complicated steps..

Check Stock

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
Lift a tab on the top, give the cartridge a twist, and pull it out.
that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..

Check Stock

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
Lift a tab on the top, give the cartridge a twist, and pull it out.
that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..

Check Stock

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..

Check Stock

Whale BE9003 Electric Field Sensor Switch, 12V or 24V, Suitable for Up to 20 Amps

Precision switch automatically activates and shuts off bilge pumps when water reaches specific levels.
Worry-free, precise operation ensures proper bilge pumping and provides peace of mind.
Automatically activates bilge pump when 2 inches of water is sensed.
Turns pump off when water level drops below ½ inch.
Two color-coded wires make installation easy.
Two test circles can be used to ensure activation.
Offers side or base mounting, can operate with 12V or 24V power, and it is suitable for up to 20 amps.

Check Stock

creatorele DC 12V 24V 32V Automatic Boat Bilge Float Switch Bilge Switches Flow Sensor for Automatic Electric Water Pump

【Bilge Float Switch】:Can be connected to various submersible pumps, bilge pumps,and water pumps .Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop..
【Use with pumps】:Turn pump on when water level reaches 2″(51mm).
Turn pump off when water level reaches 3/4″(19mm)..
【Performance】:Long life, switching frequency up to 10 million times.
Ultrasonic welding, forming a seal, reliable and secure, not leaking..
【Specification】:Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
【Easy to Clean】:Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing..

Check Stock

GOTOTOP Manual Bilge Pump 720GPH Plastic Handle Marine Manual Bilge Pump Hand Tools Water Transfer Diaphragm Hand Bilge Water Pump for Marine Boat Yacht

Flow Capacity: Delivers up to 12 gallons per minute (45 litres per minute) flow capacity. Lightweight and sturdy, its easy lever action allows fast pumping.
Convenient to Use: Strong and durable construction, specifically designed for marine applications. Easy to use and maintain, the diaphragm is quickly accessed for removing debris.
Suitable for: Ideal as a backup bilge pump in case your electronic bilge pump fails. Manual bilge pump for small to medium-sized boats.
Rubber Handle Grip: Fixed handle with rubber handle grip, easy and convenient to use. Compact design for all your water transfer needs..
Diaphragm Self Priming: This product is a 100% brand new compact manual self-priming pump..

Check Stock

Seachoice 12201 2-Position Illuminated Toggle Switch – On/Off

Two-position on/off toggle switch is suitable for the operation of running and anchor lights, bilge pumps, blowers and baitwell pumps.
Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.

Check Stock

Z care LVP Marine Boat Cleaner (3)

I.D.: 1 1/8" or 28.6mm, length: 50' or 15.2M, Bend Radius: 1" or 25.4mm, VAC rating: 20, color: White.
Note: Do not attach to thru hull fitting below the water line.
Shields Bilge flex Hose is a single layer corrugated polyethylene hose.
It is resistant to mild chemicals and salt water and there is a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.

Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (Gray, Gallon)

TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat bilges, engine rooms, lazarettes, lockers, stowage areas and bulkheads.
CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly damage, or find items accidentally dropped into the bilge.
both colors offer excellent coverage and hide.
EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
prime prepared metals with TotalBoat TotalProtect.
for fiberglass prime with TotalProtect if desired.
for wood use TotalBoat Topside Primer if desired.
EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.

Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas, White, 1 Quart (Pack of 1)

TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat bilges, engine rooms, lazarettes, lockers, stowage areas and bulkheads.
CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly damage, or find items accidentally dropped into the bilge.
both colors offer excellent coverage and hide.
EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
prime prepared metals with TotalBoat TotalProtect.
for fiberglass prime with TotalProtect if desired.
for wood use TotalBoat Topside Primer if desired.
EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.

Check Stock