ReviewsBilge Pump On A Boat

3/4 inch Check Valve, 3/4 inch Boat Bilge Pump Check Valve, 3/4" in-line one way valve, 3/4" Non Return Valve

  • (1) 3/4 inch Check Valve, prevent the back flow into the circulation pump..
  • (2) 3/4 inch Check Valve for Boat Bilge, prevent the back flow into into the boat bilge..
  • (3) 2 stainless steel hose clamps are available for free..
Check Stock

BBH Marine Boat Plastic Thru Hull Fitting Drain Fits 1\ Inch Hose

  • This fitting should be used above the waterline..
  • Our Thru-Hulls are meant for installation through the transom and are good for overflow use in livewell installations or as an exhaust port for a bilge pump..
  • Their construction is designed to resist degradation as a result of chemical and saltwater exposure..
  • Thru hull bilge fitting for Marine/Boat/Yacht..
Check Stock

OASIS MARINE Automatic Submersible Boat Bilge Water Pump Marine Plumbing 12v 750 GPH Automatic with Float Switch Built in 3/4 inch Hose Outlet

  • 750 GPH 3/4 Inch Hose Outlet 20 amp 12volt Bilge Pump.
  • Rugged water tight impact resistant housing Stainlessshaft Blocked Marine Boat wiring.
  • All in one Bilge Pump & Float Switch No additional float switch required 3 wire can be used as auto with switch or both.
Check Stock

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

  • CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
  • MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
  • SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
  • LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

  • Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency.
  • Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection.
  • Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged..
  • Easy to Install: Design common installation location and it can use with the bilge switch.
  • Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water.
Check Stock

Star brite Super Orange Citrus Bilge Cleaner - Biodegradable , 1 gal

  • Harness the power of citrus extract to leave your boat bilge clean & fresh smelling.
  • Quickly emulsifies & dissolves tough oil, grease & transmission fluid.
  • Biodegradable formula is easy to use: Just pour in, run boat, then pump out.
  • Safe for all fiberglass, metal & plastic surfaces.
Check Stock

NRS Kayak Bilge Pump One Size

  • The NRS bilge pump makes it easy to remove unwanted water from any open boat.
  • No hose necessary as the water will spray out over the side of your kayak or canoe.
  • The full length foam float ensures it won't sink if you drop it in the water.
  • Pumps 8 gallons per minute for quick emptying of your boat.
  • Bright color makes it easy to find, even in dim lighting.
Check Stock

Zoeller 807-0001 Shark Model 807 1 HP 115V Residential Grinder Pump

  • Made of high quality material for longer service life..
  • an essential tool in life, a good helper in life..
  • the product is compact in size,small and portable, carry it with you..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

Zoeller 803-0001 Shark Model 803 1/2 HP 115V Residential Grinder Pump

  • This high efficient fuel pump is an perfect equipment for quick and clean oil-changes..
  • It works great for pumping engine oil, crude oil and heating oil..
  • This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

Shoreline Marine Bilge Pump with Float Switch, 800 GPH

  • The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
  • The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
  • The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
  • The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
  • It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.
Check Stock