ReviewsBilge Pump With Hose Kit

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

OASIS MARINE Automatic Submersible Boat Bilge Water Pump Marine Plumbing 12v 750 GPH Automatic with Float Switch Built in 3/4 inch Hose Outlet

  • 750 GPH 3/4 Inch Hose Outlet 20 amp 12volt Bilge Pump.
  • Rugged water tight impact resistant housing Stainlessshaft Blocked Marine Boat wiring.
  • All in one Bilge Pump & Float Switch No additional float switch required 3 wire can be used as auto with switch or both.
Check Stock

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

  • Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency.
  • Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection.
  • Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged..
  • Easy to Install: Design common installation location and it can use with the bilge switch.
  • Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water.
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

3/4 inch Check Valve, 3/4 inch Boat Bilge Pump Check Valve, 3/4" in-line one way valve, 3/4" Non Return Valve

  • (1) 3/4 inch Check Valve, prevent the back flow into the circulation pump..
  • (2) 3/4 inch Check Valve for Boat Bilge, prevent the back flow into into the boat bilge..
  • (3) 2 stainless steel hose clamps are available for free..
Check Stock

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

  • 【Specification】:Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER:1100 GPH Current(A):3.2A Volt:12V.
  • 【Automatic mode connection】:Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
  • 【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
  • 【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
  • 【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..
Check Stock

DasMarine 1100GPH 12V 3.2 AMP 5.0 AMP Fuse 29mm ID Hose Electric Marine Submersible Bilge Sump Water Pump for Boat Yacht

  • hose barb discharge outlet:1-1/8 inch (29millimeter).
  • 2. Fully submersible electric pump.Small size, high efficiency, low current (low cost switching power supply supporting).
  • 3.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.
  • 4.Snap lock strainer base for easy installation and removal.
  • 5.Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection, need a separate float switch.
Check Stock

Gloxco Heavy Duty EPDM All Weather Suction Hose, Black Tube, Lime Green Helix, 50 PSI Max Pressure, 1-1/2\ Inside Diameter, 20 ft Length

  • Hose Dimensions: 1-1/2" Inside Diameter (1.93” Outside Diameter) Liquid Suction Hose, 20 foot Length. This hose section ships without fittings, but is compatible with most 1-1/2" Fittings with a Hose Shank.
  • Hose Materials: Black EPDM Rubber Tube with a Rigid Lime Green Polypropylene Helix. The rigid helix protects the tube from wear and helps the hose slide over rough surfaces..
  • Superior Flexibility: EPDM suction hose is more flexible than PVC suction hose, especially in colder weather. This hose has a bend radius of 3”..
  • Cold Weather Performance: This hose remains flexible even in sub-zero temperatures. It has a working temperature range of -40 ºF to 160 ºF.
  • Applications: Water Suction, Septic and Wastewater Handling, Agricultural and Irrigation, Construction Dewatering, Marine Bilge Discharge, Fracking, Trash and Sump Pump Suction.
Check Stock

Amarine Made 12V 750GPH Boat Marine Plumbing Electric Bilge Pump for Marine Boat Yacht Fully Submersible

  • 3/4" nylon hose barb allows for multiple connection options.
  • Heavy duty motors with stainless steel shafts and tough.thermoplastic bodies.
Check Stock

Five Oceans Bilge Pump Three-Way Rocker Control Panel Switch with Circuit Breaker, Black, Automatic-Manual-OFF functions, LED light indicator, FO-3851

  • With this Three Way Bilge Pump Switch, you do not have to change a fuse. In case of having a short circuit, just press the button of the circuit breaker to restore the circuit.
  • PROVIDE remote control of automatic bilge pumps or bilge pumps with float switches.
  • 3-WAY Stylish Rocker Switch has Auto, OFF and Manual positions. Power indicator light confirms system power.
  • MANUAL position has spring back feature to prevent bilge pump from continuously running.
  • COMPATIBLE with bilge pumps that draw up to 10A - 12/24VDC. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Five Oceans FO2996 Black Straight Thru-Hull Connection for Hose, 1 inch

  • This Five Oceans Thru-Hull Fitting Connection for Hose is ideal for scupper, sink drain, and bilge pump overboard discharge. Excellent resistance to UV and weather-aging.
  • It is made of tough injection molded Polypropylene plastic with AISI316 Stainless Steel Head that will resist sunlight, salt water, oil, gasoline and most common marine chemicals.
  • Hose Diameter: 1 inch (25mm). Thread Diameter: 1-1/4 inches (32mm). Maximum Thread Thickness: 1-11/16 inches (43mm). Mounting Head Diameter: 2-1/64 inches (51mm).
  • Thru-Hull connections for use with hose are not recommended for use below the waterline.
  • FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock