ReviewsBilge Pumps For Smalboats

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

  • CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
  • MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
  • SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
  • LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock

Amarine Made 3700 GPH 12v Boat Marine Plumbing Electric Bilge Pumps (3700gph 12v)

  • The Amarine-made submersible bilge pumps are tough enough for any bilge..
  • High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters / hour).
  • Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow.
  • Unique automatic “discharge” function can bear the long-term continuous operation under nearly congestion condition.
  • Impact resistant ABS housing. Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies.
Check Stock

Seachoice 3-Position Toggle Switch On/Off/On

  • Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.
Check Stock

Seachoice 12101 2-Position Boat Toggle Switch – Off/On

  • Suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
  • Single pole, single throw off/on toggle switch.
Check Stock

Seachoice 12121 3-Position Boat Toggle Switch – On/Off/On

  • Single pole, single throw on/off/on toggle switch is suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
  • Inclusive of a chrome plated brass handle, mounting stem and face nut.
Check Stock

attwood 4622-6 Tsunami Replacement Motor Cartridge, for Model T800 Pumps, 800 GPH, 12-Volt, 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T800 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

attwood 4620-6 Tsunami Replacement Motor Cartridge for Model T500 Pumps 500 GPH 12-Volt 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T500 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

Attwood 4650-7 Tsunami T800 Aerator Pump 800 GPH 12-Volt 3 ½-Inch Long Inlet Threaded ¾-Inch Diameter Outlet 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T500 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

Jabsco 18670-0123 Marine Water Puppy Bilge / Sump Flexible Impeller Commercial Duty Pump 470-GPH 12-Volt 15-Amp Non-CE 1/2 NPT Ports Black

  • Flow rate: 8 USgallons/min (30.4 Litres/min), self-priming from dry up to 1.2m (4ft).
  • Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
  • Use for bilge pumping, livewell circulation, washdown and general pumping requirements.
  • For intermittent duty, motor may be reversed to empty bait tank.
Check Stock

Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter:1 1/8\) (1100GPH)

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock