ReviewsBillet Valve

Supreme Suspensions - 4pc Set [Black] 2' Hub Centric Wheel Spacers for Jeep Wrangler JK/Commander 2WD 4WD - BP: 5x5 / CB: 71.5mm / Studs: 1/2' x20 [4 Tire Valve Caps Included]

COMPATIBLE WITH 2007 – 2018 Jeep Wrangler JK (2WD 4WD) and 2006 – 2010 Jeep Commander (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
SPECIFICATIONS: 2 Inches Thick, 5 x 5″ (5 x 127mm) Bolt Pattern, 1/2″ x 20 Studs, 71.5mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical ....

Check Stock

Billet Black Aluminum Valve Cover Oil Cap w/-10 AN Fitting for LS LSX LS1 LS2 LS3 LS6 LS7

Our auction is for LS1/LS6/LS2/LS3/LS7 Billet Black Valve Cover Oil Cap w/ -10 AN Fitting..
This valve cover adapter replaces the original oil fill tube on the factory valve cover..
It is CNC-machined from billet aluminum for precise fit then anodized black, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the adapter..
The top of the adapter is machined to accept a -10 AN hose end to facilitate the installation of a custom crank case evacuation system, PCV system, or for use with a vacuum pump..
Designed to fit nearly any LSX engine!It will protects your engine and lets it breathe freely..

Check Stock

Supreme Suspensions - 2' Hub Centric Wheel Spacers for Toyota Tacoma PreRunner 2WD & Tacoma 4WD - BP: 6x5.5 / CB: 106mm / Studs: M12x1.5 [4pc Black Pack] - 4 Tire Valve Caps Included

COMPATIBLE WITH 1995 – 2020 Toyota Tacoma PreRunner (6-Lug 2WD) and 1995 – 2021 Toyota Tacoma (4WD). *Will NOT work on vehicles with DUALLY wheels or manual locking hubs. **Please verify fitment compatibility prior to ordering..
CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
SPECIFICATIONS: 2 Inches Thick, 6 x 5.5″ (6 x 139.7mm) Bolt Pattern, M12 x 1.5 Studs, 106mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to p....

Check Stock

Nitrous Express - 4150 Dual Stage Billet Crossbar Nitrous Kit (50-300 & 100-500HP) w/10lb Bottle (66042-10)

The new NX Billet Crossbar nitrous plate systems have just raised the bar in nitrous plate technology..
The CNC machined design eliminates round spray bars resulting in excellent atomization and cylinder distribution..
With no spray bars to sag, rotate or disrupt airflow, this is truly the Next Generation in cross bar nitrous plate technology..
Systems with a bottle include the billet aluminum Lightning 500 bottle valve..
It is packed with features including two integrated gauge ports, 5/8 siphon tube, a large .500 orifice and an improved flow path with only one 45 degree turn..

Check Stock

Supreme Suspensions - 4pc Set of 2" Hub Centric Wheel Spacers for 2012-2018 Dodge Ram 1500 (2WD/4WD) - 5x5.5" (5x139.7mm) BP with M14x1.5 Studs 77.8mm Center Bore w/Lip (Black)

COMPATIBLE WITH 2012 - 2018 Dodge Ram 1500 2WD / 4WD. *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
SPECIFICATIONS: 2 Inch Thick, 5 x 139.7mm (5 x 5.5") Bolt Pattern, M14 x 1.5 Stud Size, 77.8mm Hub Centric Center Bore (Matches Vehicle Hub Diameter).
BENEFITS: Positions your wheels 2" outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are four Universal Tire Valve Stem Caps precision CNC machined from light-weight T6 Billet Aluminum with an anodized surface and rust & water-resistant polymer thread inserts to prevent corrosion & chemical damage..

Check Stock

Supreme Suspensions - 2' Wheel Spacers Kit for 2001-2010 Ford Explorer Sport Trac 2WD 4WD - BP: 5x4.5 / CB: 87.1mm / Studs: 1/2' x20 [4pc Black Pack] - 4 Tire Valve Caps Included

COMPATIBLE WITH 2001 - 2010 Ford Explorer Sport Trac (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
CONTENTS: (4x) T6 Billet Aluminum Lug Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
SPECIFICATIONS: 2 Inches Thick, 5 x 114.3mm (5 x 4.5") Bolt Pattern, 1/2" x 20 Studs, 87.1mm Center Bore | NOTE: Spacers are lug-centric, and centered using the precision machined taper seat on the lug-nuts. Centering rings are recommended for certain types of OE or Aftermarket wheels..
BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Bil....

Check Stock

Supreme Suspensions - Extended Wheel Studs Kit for Toyota, Scion and Lexus IS300 with M12X1.5 Studs 3/4\ Longer Than Stock Wheel Studs (24PC PRO Kit)

COMPATIBLE WITH TOYOTA, SCION and LEXUS IS300 Models Equipped with M12 x 1.5 Factory Studs. *Does NOT Fit 2007+ Toyota Tundra..
CONTENTS: (24x) M12 x 1.5 Thread High-Strength Spec Spline Type Extended Wheel Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, and Supreme Suspensions Pro Pack.
TECHNICAL NOTES: M12 x 1.5 Thread / 0.561" Knurl / 0.333" Shoulder / 2.374" Length. *Please verify fitment compatibility prior to ordering..
BENEFITS: High-Grade 3/4" longer than factory studs designed to facilitate proper installation of aftermarket wheels & tires and/or wheel spacers..
UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage..

Check Stock

LSM Racing Products SC-800 Valve Spring Removal Tool

This Power Valve Adjustment Tool to easily adjust your power valve properly.
Adjusting the power valve allows the rider to custom set the power the way they like it, whether it's more bottom to midrange or even all top end for those flat out desert races, adjusting the power valve on your bike is a simple quick way to give you more control over you motorcycle and how it runs..
Had designed a billet aluminum power valve tool with a wide handle that makes is easier to turn and it fits perfectly into the square pocket on the right side of the motor..
Tuning in the power valve will help get the best performance out of your bike..
Small enough to fit in your fanny pack to make adjustments on the fly.

Check Stock

Valve Spring Compressor for Dodge 5.7, 6.1, 6.2 and 6.4L HEMI

Designed specifically for Dodge 5. 7, 6. 1, 6. 2 and 6. 4L HEMI.
Allows for the easy removal and installation of valve springs without the need to remove cylinder heads.
Bolt-down design makes for a quick and easy install, while a unique lead screw and cage design compresses the spring, freeing up your hands for easy access to the valve locks.
The spring cage is compatible with factory and most aftermarket valve springs.
Manufactured from high-strength billet steel that will not bend or wear out like competitors' inferior aluminum valve spring compressors.

Check Stock

Moroso 68841 Breather Kit

Provides an easy way of adding a breather to Moroso LS valve cover with an oil fill bung.
Remove knurled cap on valve cover and screw in the Part No. 68841 Breather Kit.
Features a billet aluminum baffled screw in adapter with a 1" breather.

Check Stock

Earl s 1/2 Barb Brake Booster Check Valve-Clear

Anodized Black or Clear for Superior Corrosion Protection.
Fits Brake Boosters w/ 13/16” Hole for Grommet.
Valve Material: Premium FKM – Lasts Much Longer Than OEM Plastic & Rubber Valve.
Fits Most Brake Boosters w/ .588” Port (Inside Diameter of the Grommet).

Check Stock