ReviewsBimetal Hole Saws

Lenox Tools 1779670 6L Snap Back Arbor with 3-1/4-Inch Pilot Drill Bit for Hole Saws

  • LENOX hole saw arbor extension is fast and easy to engage and disengage.
  • No tools are needed, helping prevent the hole saw from locking on the arbor.
  • LENOX hole saw arbor threads directly into virtually all hole saws.
  • this item fits hole saws from 1-1/4” – 6” in size.
Check Stock

Hole Saw 6 1/8” (155mm) for Wood, HSS Bi-Metal Hole Cutter with Pilot Drill Bit for Plywood, Cornhole, Ceiling and Drywall

  • ⚙️【HOLE CUTTER】The HSS hole saws are perfect cutting tools for installing recessed light into ceiling, for punching a big hole at wall to fit a vent pipe or an extract fan,and also for cable installation..
  • ⚙️【SHARP TEETH】The bi-metallic cutting teeth is layered with high speed steel, that increases their hardness and durability, and gives the hole saw excellent cutting ability to punch a clean hole..
  • ⚙️【ACCURATE CUTTING】 The increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide faster and accurate cutting than standard hole saws, the diameter errors of the cut hole are less than a millimeter..
  • ⚙️【MORE EFFICIENCY】The slug holes around the saw are able to remove the wood chips while cutting, reduce friction heat, improve the efficiency. And the due to the fact that less of total amount of material is actually cut, much less power is required, longer battery life of power tools is benefited..
  • ⚙️【TRUST to PURCHASE】 Provide 60 days free return and replace service to make sure our customers’ sat....
Check Stock

ASTP&FH 2-3/4\ Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood(70 mm)

  • 2-3/4 inch Hole Saw made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. design for increased durability and outstanding cutting performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design,With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately ....
Check Stock

ASTP&FH 4-3/4 inch Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood(120mm)

  • 4-3/4 inch Hole Saw made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. design for increased durability and outstanding cutting performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design,With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately ....
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • ...lastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill or machine drill.
  • HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (work on wood only, no metal)..
  • Packed in high quality carrying case. Please....
Check Stock

COMOWARE Bi-Metal Hole Saw Kit for Metal Wood PVC Board - 3/4\ to 2-1/2\ Set with 2 Mandrels & Spare Pilot Drill, 19 Pcs

  • Compatible Material: Plastic , Metal , Wood.
  • HIGH-QUALITY MATERIAL: Hole Saw Set is made of high quality Bi-Metal. The main body and the cutting edges of the bi-metal hole saw consist of two different tool steels (bi-metal). The main body consists of a special flexible steel and the teeth that cut the material are made of HSS..
  • SUPERIOR PERFORMANCE: The varied and fine toothing ensure that the hole saw does not get caught in the material and runs smoothly. Bi-metal hole saws have a larger number of cutting edges than carbide hole saws, which allow a clean cut..
  • WIDELY AND PROFESSIONEL USE: It is your ideal choice for DIY projects and household maintenance and repair. Suitable for metal, normal wood, thin PVC board, plastic..
  • SIZE INCLUDES:10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for needs in different situations, 1 x Spare Pilot Drill for replacement, 1 x Large Mandrel, 1 x Small Mandrel with Medium Adapter and 1 x Plastic Case for easy storage. The set includes the most popular hole saw sizes on the market to meet your different demands..
  • EASY ORGANIZATION: Set includes the hole saw kit holder with size index for easy storage and organizing. It is designed to keep all ....
Check Stock

BOSCH HBT263 BIMETAL Hole Saw 2-5/8

  • PROFESSIONAL HOLE SAW DESIGN – features improved durability, clean performance and easier plug removal in multiple materials.
  • ENHANCED M42 ALLOY – contains 8% cobalt alloy to withstand high-temperature applications, and it is stronger for cleaner cuts.
  • TRIANGLE CHIP-CLEARANCE SLOT DESIGN – improves efficiency of plug removal and reduces heat due to triangle shark tooth shape.
  • PROGRESSOR TOOTH DESIGN – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • REINFORCED SHOULDERS – provide added strength and longer life to the hole saws.
Check Stock

BOSCH HBT106 BIMETAL Hole Saw 1-1/16

  • PROFESSIONAL HOLE SAW DESIGN – features improved durability, clean performance and easier plug removal in multiple materials.
  • ENHANCED M42 ALLOY – contains 8% cobalt alloy to withstand high-temperature applications, and it is stronger for cleaner cuts.
  • TRIANGLE CHIP-CLEARANCE SLOT DESIGN – improves efficiency of plug removal and reduces heat due to triangle shark tooth shape.
  • PROGRESSOR TOOTH DESIGN – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • REINFORCED SHOULDERS – provide added strength and longer life to the hole saws.
Check Stock

Hole Saw Dust Bowl - Dust Bowl for Hole Saw, for Installing Recessed Lights and Works with All Hole Saws

  • No Mess - Hole saw dust bowl collects the dust and debris while drilling. Effective attachment to prevent dust from spreading everywhere. Driller's dust bowl avoids dust or debris falling to the floor when drilling into drywall..
  • Universal - Hole saw dust catcher is compatible with power tools and fits most drills and hole saws. Hole opening 11" works with hole saws up to 8"..
  • Durable - Flexible silicon bowl with intact metal ring that prevents breaking while drilling. Our dust bowl for hole saw has high heat and abrasion resistance..
  • Easy to Use - Dust bowl for hole saw gently seals onto the ceiling while the flexible material allows you to drill into the surface..
  • Easy Clean - Easily dispose and wash the hole saw dust bow after use..
Check Stock