ReviewsBipolar Stepper Motor Driver

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length：9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

Befenybay 50mm Effective Travel Length Mini Linear Rail Guide Lead Screw T6x1 with NEMA11 Stepper Motor for DIY CNC Router Parts X Y Z Linear Stage Actuator

  • DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V..
  • MAXIMUM LINEAR SPEED: The maximum linear speed of lead screw worm drive stepper motor is 25mm per second..
  • APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc..
  • PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller..
  • NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power..
Check Stock

Nema17 42 Stepper Motor 40mm 64oz.in 45Ncm 1.7A 1.8 Degree 2phase with 1M 4-pin Cable& Connector for 3D Printer Hobby CNC Router Engraving Milling Machine 17HS4401J

  • It with 1.8°± 5%step angle (200 steps/revolution) Phase:2.
  • Product Dimensions: 1.6 x 1.5 x 1.6 inches.
Check Stock

DGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • 5 line 4 phase can be used for ordinary..
  • ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking..
  • Package includes: 2* 28BYJ-48 Stepper Motor + 2* Uln2003 Driver Board.
Check Stock

STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor

  • Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs..
  • Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor.
  • 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution.
  • Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock

5Pcs Nema 17 Stepper Motor 40mm 64oz-in 45Ncm 1.7A 1.8 degree 2 phase with 1M 4-pin Cable & Connector Bipolar 42 stepping motor for 3D Printer Hobby CNC Router Machine 17HS4401J

  • It with 1.8°± 5%step angle (200 steps/revolution) Phase:2.
  • Product Dimensions: 1.6 x 1.5 x 1.6 inches.
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ... ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle allow for highly dynamic motion. Drive current 2A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision..
Check Stock

diymore 5-Set DC12V 28BYJ-48 Stepper Motor with ULN2003 Drive Boards Blue(12V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock