ReviewsBlack Exhaust Tips

Black Exhaust tip - Fit 2.5 to 3 Inch Exhaust Tail Pipe Diameter- Black Coated Stainless Steel - Car Muffler Tips

  • Please measure your own pipe and bumper cutout, and compare to this product fitment size..
  • This exhaust tips fit pipes measuring between 2.5 and 3 inches in diameter..
  • Size : / Length 7 '' / width 4.5'' / Inlet Diameter 3 3/8 '' / Outlet Diameter 4.5''.
  • This muffler tips are made by high quality stainless steel with black coating..
  • Clamp-on installation : They are attached to the tailpipe by clamps and screws (Included)..
Check Stock

PAIR OF TWO FLAT BLACK UNIVERSAL DUAL EXHAUST TIPS 3"

Check Stock

Black Exhaust tip - Fit 1.75 to 2.5 Inch Exhaust Tail Pipe Diameter- Black Coated Stainless Steel - Car Muffler Tips

  • Please measure your own pipe and bumper cutout, and compare to this product fitment size..
  • This exhaust tips fit pipes measuring between 1.75 and 2.5 inches in diameter..
  • Size : / Length 6'' / width 3'' / Inlet Diameter 2 3/4'' / Outlet Diameter 3''.
  • This muffler tips are made by high quality stainless steel with black coating..
  • Clamp-on and bolt-on installation : They are attached to the tailpipe by clamps or screws..
Check Stock

AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On

  • Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Yonput 1 PC 2.5 Inch Inlet Exhaust Tip, 3.3" Outlet 5.7" Overall Length, Stainless Steel Black Powder Coated Exhaust Tailpipe, Rolled Angle Cut, Car Universal for 2.5" OD Tailpipe (Bending)

  • Dimension: 2.5 inch inside diameter inlet, 3.3 inch outside diameter outlet, 5.7 inch overall length. Please make sure the outside diameter of your car tailpipe is 2.5-inch before purchase..
  • High Quality: The stainless steel exhaust tail is made of high quality stainless steel with strong anti-corrosive, it effectively resist heat, rust and deformation to protect and decorate your tailpipe system well..
  • Stylish Design: Black powder coated surface treatment, high temperature resistance, not easy to scratch and fall off. Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound..
  • Easy Installation: Bolt On Installation, not easy to screw off, no drilling or welding needed..
  • Maintenance Tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips to keep the surface clean..
Check Stock

Black Double Wall Exhaust tip - Fit 2 to 2.75 Inch Exhaust Tail Pipe Diameter- Black Coated Stainless Steel - Car Muffler Tips

  • Please measure your own pipe and bumper cutout, and compare to this product fitment size..
  • This exhaust tips fit pipes measuring between 2 and 2.75 inches in diameter..
  • Size : / Length 6'' / width 3.5'' / Inlet Diameter 3'' / Outlet Diameter 3.5''.
  • This muffler tips are made by high quality stainless steel with black coating..
  • Clamp-on installation : They are attached to the tailpipe by clamps and screws (Included)..
Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

2 Pcs Stainless Polished Muffler Exhaust Tip Finisher Compatible with 2016-2020 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System (Will Not Fit Hatchback Sport or Si or Type-R).
  • Package includes: 2 x Exhaust Pipe Tip Finishers as Shown (Quantity 1 means 2 Exhaust Tips).
  • Made Of Stainless Steel Material in Nice Polished Chrome Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws.
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

Caltric Exhaust Pipe Gasket Compatible With Suzuki Dr-Z400 Dr-Z400E Dr-Z400S Dr-Z400Sm 2000-2017

  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This Billet exhaust tip fits on the end of your OEM Yamaha exhaust system increasing your rides overall performance and sound..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

2 Pieces Titanium Black Chrome Muffler Exhaust Tip Finisher Compatible with 2016-2021 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System. Will Not Fit Hatchback Sport or Si Model. Exhaust May Need to be Adjusted For Installation..
  • Package Includes 2 x Exhaust Pipe Tip Cover as Shown. Quantity 1 Means 1 Pair of Tips.
  • Made Of Stainless Steel Material In Titanium Gunmetal Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws. Simply Slide in and Tighten up the Screw..
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

Rough Country Dual Exhaust (fits) 2007-2018 Jeep Wrangler JK | Axle Back | Stainless Steel | Matte Black | 96002

  • Corrosion Resistant 409 Stainless Steel construction in Matte Black.
  • Chambered muffler offers throaty and aggressive sound with a 2. 5" high-flow design.
  • 4" 304 stainless dual wall exhaust tips with RC Logo.
  • Easy at Home Installation and Support Provided by RC..
Check Stock