ReviewsBlade Fuse Block

MulWark 349pc Car Fuses Assortment Kit & Add-a-Circuit Fuse Adapter- Standard & Mini & Low Profile Mini Automotive Fuses Set (2A 5A 7.5A 12A 15A 20A 25A 30A 35A 40A), for Car Boat Truck SUV RV

  • ALL-SIZE FUSES YOU NEED: This fuses assortment box contains 24 commonly used blade fuses: 120pcs Standard: 2A/ 5A/ 7.5A/ 12A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A(12pcs of each ), 120pcs Mini: 2A/ 5A/ 7.5A/ 12A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A(12pcs of each), 120pcs Low Profile Mini: 2A/ 5A/ 7.5A/ 12A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (12pcs of each).
  • 9 pcs add-a-circuit fuse tap adapters: Standard & Mini & Low Profile Mini( 3pcs of each).
  • CONVENIENT DETECTION: Metal blades extend to the top, allowing you to use a test light or fuse tester while the fuse is still mounted in the fuse block. The plug-in blade fuses are made of plastic with high optical clarity, making it easier to see whether the fuse is blown. They can be easily identified by their color-coded plastic housings, and the white mark amp rating figures on the top.
  • DUAL SLOT FUSE TAP: The double slot fuse holder adds a circuit fuse tap to protect the new circuit on the basis of protecting the existing circuit. It makes adding accessories to your car immensely simple and safe.
  • Add-a-Circuit Fuse Adapter:The fuse adapter is made of high-quality materials, features good melting resistance and excellent conductivity. These 32 Volt fast-acting replacement spade fuses protect your vehicles, ....
Check Stock

Nilight 12 Pack 12V Car Add-a-Circuit Fuse Tap Standard Mini Micro2 and Low Profile Fuse Taps 4 Types ATO ATC ATM APM Fuse Holder for Cars Trucks Boats

  • Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
  • Easy to use: plugs into occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
  • Great compatibility: Automotive and non-automotive use for Cars, Trucks, SUVs, ATVs, UTVs, Campers RVs,Motorcycles,Boats,snowmobiles,and most general DC applications etc,covering such components as radio, light,etc. Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
  • Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
  • Package include: 3pcs Standdard fuse tap,3pcs Mini fuse tap,3pcs Micro2 fuse tap,3pcs Low Profile mini fuse tap,12pcs blade fuses..
Check Stock

SZMWL Fusible Link Fuse Block 82620-07050 for Toyota 2007-2011 Camry 2005-2006 Avalon 82620-07050

  • ✔Well-Design ---- The Fusible Link Fuse Block can perfectly match for your original car.well design for the function..
  • ✔Compatibility ---- The Fusible Link Fuse Block fits for Toyota 2007-2011 Camry, for Toyota 2005-2006 Avalon..
  • ✔High Quality--- This Fusible Link Fuse Block is made of high quality ABS and metal material. Long time to use. Manufacturer Part Number:....
  • ✔Package Included ----1x Fusible Link Fuse Block..
  • ✔Easy to Install ---- This Fusible Link Fuse Block for car accessory is very easy to install, it can be simply apply on your car..
Check Stock

Painless Performance 70114 Cirkit Boss Heavy-Duty Auxiliary Fuses Block, 3 Ignition-Hot Circuits

  • Safe way to add electrical accessories to any vehicle.
  • This kit allows for the addition of 3 fused circuits to your already existing factory fuse block.
  • Simply mount the fuse block and relay, route the large 10-gauge wire to the battery, route the ignition wire and then route the 3 accessory circuits to the accessories needing power.
  • Main power wire is 8 feet long from fuse block.
  • Each accessory circuit has 8 feet of wire length from fuse block..
  • Provides three ignition hot circuits with a maximum total amperage handling of 70 Amps.
  • Includes: 70-amp SPST relay, Relay base/fuse block with harness, Crimp-on terminals and mounting hardware.
Check Stock

WUPP 12 Volt Fuse Block Waterproof Boat Fuse Panel with LED Warning Indicator Damp-Proof Cover - 6 Circuits with Negative Bus Fuse Box for Car Marine RV Truck DC 12-24V Fuses Included

  • QUICK FIX: When the current/voltage exceeds the rated range,the fuse will be automatically blown.It has leds beside each load to indicate if a circuit has shorted or has blown.So you can easily identify it and change it!.
  • MAKE WIRING CLEAN: Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!.
  • UNIVERSAL PROTECTION: The input rated voltage of the fuse box is 32V,and the input rated current is 100A.Each circuit outputs a maximum current of 30A. All bus bars and fuse pieces are nickel-plated copper, corrosion-resistant and highly conductive..
  • SAFE MATERIAL: PBT flame retardant material base,good mechanical strength and high temperature resistance. It is insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • FREE BLADE FUSES: 6-Way Package includes: 20A Fuse*4, 15A Fuse*4, 10A Fuse*2, 5A Fuse*2, Labels*2, Screws*4.
Check Stock

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats,marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

Deyooxi 12 Way 12V Blade Fuse Block,12 Circuit ATC/ATO Fuse Box Holder with LED Indicator Waterpoof Cover for 12V/24V Automotive Truck Boat Marine RV Van Vehicle with 16 pcs Fuse

  • ➤ Optimal Conductivity:12 Circuit Fuse Block Box is applied to ATC/ATO (Middle Size) fuses, which has positive & negative side. It means every....
  • ➤ Superior & Safe Material:Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is....
  • ➤ Appliance Name Labels:Comes with multifunctional DIY sticker for convenient examination & repair. You can easy to identify which appliance is....
  • ➤ LED Safety Indicator:Red LED warning light will light up immediately when the corresponding fuse is blown. It is both safe and easy for you to....
  • ➤ Wide Appication: This 12-Circuit Blade Fuse Box widely used in Cars, Buses, Tankers, Boat, Marine, Truck, SUV, Yacht, RV, Ships etc.Package....
Check Stock

Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)

  • ✯ Category: Fuse Holder Terminal Block.
  • Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
  • ✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
  • ✯ Compact Fuse holder Terminal Block used in control circuit applications..
Check Stock

3 Types 12V Add-a-Circuit Adapter & Fuse Kit - Muhize Fuse Tap Fuse Holder with Standard Mini and Low Profile TAP Blade Fuse for Cars Trucks Boats (9 Pack)

  • PACKAGE INCLUDE - MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses.
  • MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses.
  • MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses..
  • DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
  • WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for blade fuses (rating 2Amp-40Amp). 3 Types: Low profile mini fuse adapter fits for Korean Cars.
  • Mini fuse adapter fits for Japan and US Cars.
  • Standard fuse adapter fits for European Cars. Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock

GNAWRISHING 16 AWG ATC/ATO Inline Fuse Holder(3PCS) and Standard Blade Fuse 5PCS of Each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A Assorted Set

  • 【PRODUCT STANDARD】Fuse Holders 16 gauge (AWG) red color 12 inch/30cm copper wire , and standard blade fuse: 0. 75 x0. 7 x0. 2 Inch. ( 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A) 5pcs each..
  • 【PACKING QUANTITY】 3PCS 16 AWG ATC/ATO Inline Fuse Holder, 5PCS Blade Fuse of each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, total 45PCS Blade Fuses. 6PCS terminals connectors..
  • 【QUALITY ASSURANCE】 It is tin-plated copper strands. This is a very high quality type of wire with excellent resistance to corrosion, and is typically found in marine grade products..
  • 【WATERPROOF AND DUSTPROOF】Waterproof and dust proof capacity and reliable performance..
  • 【OUR INDUSTRY LEADING ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE】 EACH AND EVERY Fuse Holder and Blade Fuse is COVERED with the ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE! If for ANY REASON YOU ARE NOT COMPLETELY SATISFIED with the Fuse Holder and Blade Fuse, we will REFUND the ENTIRE AMOUNT (or replace it free-of-charge)..
Check Stock