ReviewsBlast Furnace Tap Hole

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
No more using a drill to drill the hole and then tapping it out later with another tool..
HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
you can use them in aluminum, plastic, wood and other thin soft material metal panel.
When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
Back taper exceeds the tap to prevent over-drilling and damage to the thread..
WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..

Check Stock

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation.
Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter.
2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern).
Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach.
BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage.
Transparent hose is FDA approved 21CFR 175.300 PVC.
KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and bacteria that could otherwise make their way into the spout of the faucet and into your drink.
Faucets (tap handles) are threaded and removable for easy cleaning and sanitizing.

Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

...ential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more s....

Check Stock

Love Theme From An X-Rated Movie/Theme From Paper Tiger My Little Friend

MATERIAL: Superwool Plus paper, which is flexible, strong, seals well & withstands 2000F. Superwool is an alternative to ceramic fiber with improved....
FEATURES: Low bio persistence, Thin, flexible high temperature insulation, Thermal stability, Low heat storage, Easily die-cut to form complex shapes....
USES: Gaskets for any high temperature application, Gasketing between aluminum and zinc trough sections, Aluminum furnace tap-out plug cover and....
DIMENSIONS: 125' x 24'' x 1/8'' (250 sf/ctn).
Made in the USA by Morgan Thermal Ceramics PN: 53448242030000.

Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

...dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools..
Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much more robust and used for a broader range of material. These cutting materials ar....

Check Stock

Tiny Home for Military Couple

...e, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
[Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. Directly installing on a kegerator dispenser would be easier, no drills needed..
[Upgraded Self-closing Springs & Keep Improving]: The package includes 2 springs for self-closing tap installation. The spring is so strong that you may need a hand for installation. A self-closing tap is the end of drippings. Please feel free to tell if any problem, we would try our best to help. Lifetime technical support..

Check Stock

Jewel Gem - Blast Match 3 Puzzles Game, Jewel Games Free For Adults On Kindle Fire

Bright, colorful, and fun levels to play.
Tap to blast away groups of three or more jewels.
Amazing power-ups to solve match 3 puzzles.

Check Stock

uxcell Adjustable Tap Wrench Handle, for Metric M1-M10 W1/16-3/8 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated

Tap Wrench: Fit tap size: M1-M10 (Mertic)/ 1/16" - 3/8"(UNC/UNF) / 1.5mm-10mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.

Check Stock

uxcell Adjustable Tap Wrench Handle for 1/16\-1/4\ (UNC/UNF) / M1-M8 Taps, Tap Reamer Tapping Wrench Hand Tool with Plastic Dipped Handle

Tap Wrench Size: Fit tap size: 1/16"-1/4" (UNC/UNF) / M1-M8 (Metric). Black oxide coating for good abrasion resistance and rust protection. Hardened carbon steel sliding block for high hardness and strength..
Wide Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially suitable for larger-diameter taps..
Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread. Plastic dipped handle provides firm and comfortable grip in use when exposed to fluid or moisture..
Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other..

Check Stock

uxcell Adjustable Tap Wrench Handle, for Metric M1-M8 W1/16-1/4 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated, 2pcs

Tap Wrench: Fit tap size: M1-M8 (Mertic)/ 1/16" - 1/4"(UNC/UNF) / 2mm-9mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.

Check Stock

Stovetop Espresso Maker, Moka Pot, Godmorn Italian Coffee Maker 450ml/15oz/9 cup (espresso cup=50m), Classic Cafe Percolator Maker, Stainless Steel, Suitable for Induction Cookers

...Unlike cheap materials,there is no smell to affect the pure flavor of coffee.The extraction pot hole is made of high quality material, which make the coffee more mellow, and bring high quality coffee to you to enjoy.
✅【Stove & Induction Heat】-- This moka pot is suitable for fire and induction cookers, electric furnace, ceramic furnace, alcohol furnace, gas stove. The minimum coil diameter of induction cooker must bigger than 8.5cm. Bottom might turn black when it contacts with open flame, it do not affect use..
✅【Focus on Quality】-- Heat insulated ergonomic handle and easy-pour spout, plus good sealing, make up your quality life. Polished mirror surface makes it look elegant and exquisite..
✅【Safety Valve】-- Safety valve adjust pressure in boiler, keep pressure in appropriate level, fully release the flavor and mellow of coffee. The most important is ensuring safety..
✅【9 Cups/450ml 】-- ( Standard espresso coffee cup is 50ml ) With a quick and even heating, accompanied by a strong aroma, Godmorn espresso maker can offer you a pot of 6 cups (450ml) of gourmet espresso in just five minutes, and you'll be instantly impressed by its rich taste and aroma..

Check Stock