ReviewsBlue Stn Lcd Module

HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128x64 LCD Blue Color

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display..
LCD 12864 graphic smart display module with blue backlight, Small and light appearance, it is easy and convenient to use..
Using a large screen 12864LCD (3.2'), it can support 8 GB..
Print your 3D designs without PC, just with a g-code design stored on the SD card..
Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc..

Check Stock

Character LCD Module 16x2 RGB Backlight for Arduino

Displays 2-lines X 16-characters, Blue display with white letters which provide Wide viewing angle and high contrast..
Operates from 5V DC so you can connect directly to arduino board..
Built-in industry standard HD44780 equivalent LCD controller..
Comes with hookup and operation documentation..

Check Stock

4Pcs LCD1602 1602 LCD Module Green Screen 16x2 Character LCD Display with IIC I2C Serial Interface Adapter Module

1602 lcd screen can display 2-lines x 16-characters with built-in industry standard HD44780 equivalent LCD controller.
LCD1602 1602 LCD module working voltage: 5V.
To come with a potentiometer, which is applied to adjust backlight and contrast.
It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
LCD1602 1602 LCD module compatible with copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices..
1602 display function: LCD display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on..

Check Stock

HiLetgo HD44780 2004 LCD 20x4 2004A Character LCD Screen Display Module Blue Backlight with IIC/I2C Serial InterfaceAdapter

HD44780 2004 LCD 20x4 2004A Character LCD Display Module.
Fully assembled and tested Serial LCD 20x4 Module.

Check Stock

Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560

IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..

Check Stock

Gel Heating Machine,Portable PRP PPP Gel Maker Heater,Plasma Bio-Filler Equipment,Instrument Autologous Serum Filler with Digital Display for Laboratory Hospital

...~100℃,Time range: 1min~99h59min/∞,Temperature accuracy: ≤±0.3℃,Display accuracy: 0.1℃,Heating time: ≤12min (25℃ to 100℃),Power: 150 watts,Fuse: 250V 3AФ5×20,Size: 10x7.7x6in,Net weight: 2.5 kg..
【LCD Display】Portable PRP PPP gel maker heater has easy module replacement, easy to clean and disinfect, beautiful appearance, blue LCD display instant parameter information..
【High Precision, Automatic Recovery Function】Optional power failure automatic recovery function, automatic start running function, improve efficiency, intelligent algorithm, ensure the whole process temperature control accuracy ≤ +03C, effectively reduce the experimental error..
【Multiple Protection】Plasma bio-filler equipment can ensure the stability of long-term operation and safety in the case of unattended operation, comply with CE standards, and support the custom calibration function of module classification..
【Wide Range of Application】Instrument autologous serum filler is the best designed product controlled by microprocessor. It can be widely used for sample storage and re....

Check Stock

waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard

Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.

Check Stock

1.8 inch SPI TFT LCD Display Module for ST7735 128x160 51/AVR/STM32/ARM 8/16 bit

This is a new 1.8 inch serial SPI color display module.
Support analog SPI and hardware SPI. SPI serial, less I/O port need.
Designed with one socket for sd card and PCB adapter for LCD.
The LCD display module can be driven by 8051 / AVR / PIC /ARM/STM32.
The 4D systems lcd display can be driven with at least four IO.

Check Stock

HiLetgo 2pcs HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Blue Blacklight New

Commonly-used HD44780 controller is built in this 1602 LCD module.
Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA, SCL.

Check Stock

LCD Touch Panels Touchpanel Analog for DOGM128-6 (EA TOUCH128-1)

... defining functions by components. It's easy even for beginners..
Lots of Powerful Upgrades - New Launch Intelligent Series 7.0" TFT LCD monitor can be controlled by any MCU. This offers 1 G Hz Cortex A8 CPU driving device and 256 Flash memory for HMI projects. You also get RS232/TTL UART Interface and USB port. The module is compatible with 7/28V wide operation voltage. (This is an excellent choice for your Arduino and Raspberry Pi projects.).
Clear, Detailed, Hi Res HD - Our Smart HMI TFT LCD display offers excellent 800x480 high resolution with 4-wire resistance touch screen. Rich 262K (18bit) color for high color restore. Rectangular ratio 16:9 display format conversion. 70°/70°/50°/70° wide viewing angle, adjustable brightness（300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWI070WT-01 is a customer favorite for a wide range of industrial and business applications. You get highest quality with the most usable functions. Often purchased for equipment in medical, beauty, engineering, industrial control, electric power, civil electronics, automation, traffic, new energy, a....

Check Stock

Power Supply, DPS3005 /DPS5005 Communication Version Bucks Power Supply Step-Down Voltage Converter(DPS3005-USB-BT)

The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one.DPS3005 /DPS5005 have same functions, only the technical parameters are different,for example, voltage, current ,etc.
This module has power-down stored function and can store 10 groups preset value.And it also has the function of extracting quickly two groups stored value. Though this module has reverse connection protection and output short circuit protection, you can muse be in strict accordance with connection description to connect. If you connect the supply power with output, the module will be burnt.
Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.
LCD display on the module has the function digital voltmeter and ammeter.You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc.
On the setting data interface, you can adjust over-voltage value, over-current value, o....

Check Stock