ReviewsBluetooth Module

DSD TECH SH-HC-08 Bluetooth 4.0 BLE Slave Module to UART Transceiver for Arduino Compatible with iOS

  • It is a bluetooth 4.0 ble module with 6 PIN baseboard for Arduino also for your DIY wireless project. leads interface includes VCC, GND, txd, rxd ,....
  • Only Slave mode. Compatible with iPhone 4s/5/5s 6/6s and android phones 4.3 or later. We offer a free app for this module. DSD TECH offers the free....
  • Main chip is cc2541F256 manufactured by TI. if you are MCU pro, you can program it by cc-debugger..
  • Default rate : 9600, Working voltage 3.3V to 6V. and You can modify the baud rate and the Bluetooth name via the at command.
  • LIFETIME WARRANTY: We back this Bluetooth 4.0 LE module with LIFETIME WARRANTY. If you meet any question, please contact us, we will fix your issue....
Check Stock

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano

  • Low Energy: With HM-10 bluetooth 4.0 module, you can add Bluetooth features to your project and support iphone4s or later..
  • DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project.
  • Led status indication: when the connection is established will always light, disconnection is flash.
  • iBeacon Support:You can make this module into ibeacon mode.So you can have your own ibeacon.it also Supports Apple Notification Center Service (ANCS).
  • working voltage 3.6 V to 6V,Default rate of 9600. DSD TECH back this Bluetooth 4.0 LE module with ONE Year WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours..
Check Stock

Wireless Bluetooth AUX Adapter Car Audio Stereo Module for Pioneer Wireless IP-Bus Input

  • 【Compatibility】: AUX Adapter is designed for Pioneer Wireless IP-BUS input.
  • 【Easy to use】: For pioneer bluetooth ip bus auxiliary cable receiver is easy to use, just connect the 12-pin connector on the back of the radio..
  • 【About the wiring】: Just plug it into the back of the radio, then connect the red wire to 12V+ and the black wire to 12V-..
  • 【Mobile phone use】: Audio Bluetooth Adapter responds to the mat of your mobile phone or Bluetooth module. Select Aux from your radio, and then you....
  • 【Bluetooth adapter】: This Bluetooth Audio Stereo Module allows you to listen to music via mobile phone/tablet/mp3 (note that your device needs to....
Check Stock

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

HC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module

  • RXD: the receiver, Bluetooth module receives from another device sent data.
  • normally connected to other devices transmitting end TXD?.
  • TXD: sending end, the Bluetooth module to send data to other devices.
  • receiving terminal is normally connected to other devices RXD.
Check Stock

AITRIP 6pcs D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth Development Board 5V Compatible with Arduino

  • Wireless WiFi Bluetooth 2 in 1 dual-core CPU module MINI KIT ESP32 module development board module.
  • 100% compatible with Arudino IDE, Lua and Micropython.
  • Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality.
  • All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO.
  • It has a similar pin layout to the conventional D1 Mini ESP8266-12F and is therefore pin-compatible with most accessories for it..
Check Stock

G2TUP Cosplay Cosmetic Makeup Bag Fan Gift Always Be Yourself Unless You Can Be Always Be Yourself

  • Bundle of AtomX Sync Module for Ninja V and Ultrasync Blue.
  • Extended the range of Bluetooth connected devices.
  • The Ultrasync Blue converts long range RF to Bluetooth, meaning you can go from from 15m to over 200m and benefit from the out of range continuous....
  • The new AtomX SYNC module brings wireless timecode, sync and control technology to the Ninja V. It connects multiple Ninja Vs, cameras and audio....
  • At the same time it can also bring other devices into the synchronised system via Bluetooth.
Check Stock

Minelab Equinox 800 Multi-IQ Underwater Metal Detector & Pro-Find 15 Pinpointer

  • Includes: PRO-FIND 15 pinpointer, EQX 11" Double-D Smart Coil with Skidplate, Wireless Bluetooth / apt-X Low Latency Headphones, WM 08 Wireless Audio Module.
  • Multi-Language Screen Protectors, Adjustable Armrest, USB Charging Cable with Magnetic Connector,.
  • Features: 4 Detect Modes (Park, Field, Beach, Gold).
  • 6 Frequency Options (Multi, 5kHz, 10kHz, 15kHz, 20kHz, 40kHz).
  • Bluetooth Headphones and WM 08 Wireless Module Supplied.
Check Stock

LC-dolida Bluetooth Ear Warmers Ear Muffs Earmuffs Built-in HD Speakers for Winter

  • ♫ WINTER EAR MUFFS & BLUETOOTH HEADPHONES 2 in 1-Wanna listen to some music but ears feel frozen in the cold winter weather?Now LC-dolida bluetooth earmuffs Headphones is the pefrect choice for you! It's bluetooth ear muffs headphones,It's ear covers for cold weather!LC-dolida Bluetooth Winter Ear Muffs headphones allows you to listen to music without having to wear additional headphones and keeping warm. And the built-in microphone to let you won't miss any callings.
  • ♫ HD High Fidelity Sound Music Experience- You can enjoy enhanced music listening experience with advanced digital sound with bluetooth earmuff headphones while keep your ears warm. Delivered by high performance stereo loudspeakers, bluetooth ear muffs for men women allows you to focus on favorite music and answer calls. Bluetooth earmuffs fashion style design makes it a ideal gift or cool tech gadgets for men, women, boys, girls as a birthday gift, Christmas gifts, Thanksgiving Day's gift.
  • ♫ Bluetooth V5.2 Wireless Technology- With the Latest Bluetooth V5.2 chipset,the bluetooth ear muffs for men women connects stably with cell phones, tablets, laptop and other Bluet....
Check Stock

Nordic BLE 4.0 nRF51822 Controller Chip Bluetooth Module Small Size 18.5 x 9.1x 2.0mm 5 Pack

  • YTX51822-S01 is a high performance ,low power radio transmit and receive system module based on Nordic BLE 4.0 nRF51822 controller chips..
  • It has the smallest volume package in the industry, the size is 18.5 X 9.1X 2.0, suitable for most applications which pay more attention to the size..
  • The module integrate the complete standard low energy Bluetooth 4.0 protocol stack S110 drive..
  • Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts..
Check Stock