ReviewsBoard Camera

8MP POE IP Camera with IR-Cut POE Network Camera Module BlueFishcam 4K IP Security Board Camera for DIY/Repair/Upgrade (8MP-4K, 3.6mm)

4K Board IP camera module 8MP POE camera network Camera Module with 3.6mm fixed lens for DIY.
1/2.8” Ultral Low-illumination Progressive Scan CMOS, 4K 8MP high resolution3840*2160 @ 20fps..
Embedded Web Server, support Internet Explore monitoring, configuration, upgrade, H.265/H.264 high compression , two simultaneous video streams.
Package: 1 piece of POE IP board Camera for DIY. It's with POE function, you can use normal power supply,too. Power required: DC 12V 2A.

Check Stock

SUKRAGRAHA Infrared LED Light Board Module 3W 850 IR High Power Night Vision Infrared Illuminator Adjustable Resistor for Raspberry Pi Camera Night Vision Module (2pc)

Package Includes: 2 X Infrared LED Light Board Module.
3W high-power 850 infrared LED, designed to work for Raspberry Pi camera.
Onboard photoresistor, ambient light detector.
Allows adding night vision function to RPi Camera (E) or RPi Camera (F).

Check Stock

Arducam IMX477 Camera Bundle Compatible with Nvidia Jetson Nano/Xavier NX, 12.3MP HQ Camera Module with 6mm CS-Mount Lens, Metal Enclosure, Tripod and HDMI Extension Adapter

High Quality Camera: This camera adopts 1/2.3″ 12.3 Megapixel IMX477 sensor for sharp image, max. still resolution 4056(H) x 3040(V), frame rates 30fps@4K, 60fps@1080P..
No Hassle: No more wasting time looking for the CS lens and camera case. It includes A 1/2.3" 6mm focal length CS lens, an industrial metal enclosure mounted on the camera board, and a mini tripod stand..
High-Speed HDMI: Come with the customized shell with standard HDMI port, a 3.3ft HDMI extension cable and a Jetvariety adapter board, all high quality built to ensure steady signal transmission and minimize signal loss..
Applications: Highly recommended for monitoring Octoprint 3D Printer, motion detection, security camera system and other vision applications demand high resolution and high frame rate. Please contact Arducam if you need the 3D file of this camera, other lenses and customization service..

Check Stock

Haktoys Wide-Angle Camera for HAK907 & HAK909 with 1 GB Micro SD Card & Card Reader

Includes 1 x Camera that is attachable to the helicopter, 1 x 1 GB Micro SD Card, 1 x Micro SD Card Reader, 4 x Screws.
Camera is attachable to the quad copter. Camera angle can be moved..
Instructions: 1- Insert the micro SD car into the card slot on the camera..
2- Attach the camera to the camera mount under your quad copter using the screws..
3- Insert the camera plug to the camera socket. The socket is usually located on the circuit board for camera-ready products..

Check Stock

Valwix Inflatable Stand Up Paddle Board w/ High Pressure Electric Air Pump & Built-in Action Camera Mount, 11' x 32'' x 6'' Paddleboard 350LBS Capacity SUP (Blue)

...comes with a $109 worth dual stages inflation/deflation electric air pump connected to 12V car plug. 8-min quick inflation, blow up 2 SUPs in a row for family & friends. Do not let 20-min hand pumping kill your paddling vibe. An electric air pump is always a better company for your inflatable stand up paddle board..
CAMERA MOUNT BASE - Valwix SUP board features built-in action camera mount to record exciting footage of active boarders. The extra-grippy EVA pad offers a large, comfortable mat for versatile activities like fishing, yoga, and recreational paddling..
SUP BOARD OF STABLE & EASY MANEUVERABILITY PERFORMANCE - Perfect pulling hall shape with extra width & high quality anti-slip deck material for incredible stability on flat water, lake, river and even choppy water for its all-around design. 5 D-rings are compatible with kayak seat, cooler deck bag and other gears for fishing and etc. for variety of activities..
FULL-TIME FAVOURITE PADDLE BOARD - Valwix inflatable SUP board packed with all necessary accessories and 20L dry bag (biggest on the market). Incredible travel-friendly and convenient storage with its original high quality backpack..

Check Stock

8 Pieces Camera Compatible with Raspberry Pi Module with 15 Pin Ribbon Cable and Flex Extension Cable Set Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4

Focus lens: OV5647 Pi camera sensor has a fixed-focus lens, which can capture clear and beautiful images quickly and easily, helping you keep happy moments and save unforgettable memories.
CSI interface: 5-megapixel camera module uses a dedicated CSI interface, so the higher bandwidth ink that carries pixel data from the camera back to the processor via the CSI bus, interface carries pixel data from the camera back to the processor, BY THE WAY with pi zero ribbon cable can be applied on zero board perfect.
Resolution parameter: 2592 x 1944 Pixel Static Images, 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,5 megapixel sensor OV5647, and its video resolution is 1080p, which is clear enough for you to use.
This is a practical design for you to take some beautiful photos of your family.
Flex extension cable set: whatever for 3D printer, home security, or other for raspberry pi camera project, this camera cable set can totally meet your requirement.
Compatible with all Raspberry Pi board, camera module and display, suitable for octoprint 3D printing monitoring.
Wide compatibility: this 5 megapixels camera module is compatible with raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4, works well with your equipment, bring y....

Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.

Check Stock

SVPRO 5MP USB Camera Module, Wide Angle 170 Degree Fisheye Mini Camera Board Aptina CMOS Sensor USB Camera Module UVC Support Windows Android Linux Mac for Robot/Research/Medical/Industry

"【Super Aptina MI5100 Image Sensor】5 Megapixel USB Camera Board adopt high quality Aptina CMOS MI5100 Sensor, deliver sharp images effectively, High defination with low color reproduction deviation. Frame rate 2592x1944 at 15fps, 1920x1080 at 30fps".
【170°Ultra Wide Lens】Usb camera module with fisheye lens is designed for shooting very wide angles, it can capture an extremely wide image and incredible viewing, give you a different visual experience..
【Wide Applications】5MP usb camera board with high defination with low color reproduction deviation < 20%, deliver sharp image and accurate information, great fit for high standard medical industry requirements.Wide application for machinary equipment,all-in-one machine,robot,scanner,industrial machine,medical auxiliary equipment....
"【Plug & Play 】Drive-free usb camera is very easy to use, just need to plug the webcam to USB port, no need to download or install any drivers. High speed USB 2.0 usb camera also support OTG protocol(UVC).".
【High Compatiable】5MP hd usb camera compatible with Windows WinXP/Vista/Win7/Win8 Linux with UVC（above linux-2.6.26） MAC-OS X 10.4.8 or later Android 4.0 or above with UVC. Can run on free software - Yawcam / ContaCam.

Check Stock

iFlight 3D Printed Case with BEC Board for NakedHero 8 Camera for Alpha C85 Pusher Protek25 Protek35 FPV Whoop Drone

iFlight BEC board with 3D Printed Case designed for NakedGoPro Hero 8 ,super light weight,makes your naked camera 8 lighter and easier to install on your drone.
BEC output voltage is 5V 2A,avoid the accident of power off which is caused by the insufficient power supply for the FC board.
Integrated stock buttons for GoPro, Power/Mode Button, Record Button, and LED to know the status of the camera. The pad is available for pilots to control the camera recording via the radio transmitter..
With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.
About the setup on betaflight and the assembly guide,please check the second image and third image or the listing description.

Check Stock

Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4

for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
Connect the included ribbon cable to the CSI (Camer....

Check Stock

SainSmart XBee USB Adapter for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot

This camera module is designed for NVIDIA Jetson Nano Board and Raspberry PI CM3..
With 8-megapixel IMX219 sensor and features the fixed focus77-degree field of view. (The drive board is no longer needed.).
Support 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording. With the power interface, it also supports 3.3V output power supply..
This camera module is widely used for AI intelligent recognition, face recognition, road identification line recognition, license plate recognition,....
If you have any questions about the product, please feel free to contact us..

Check Stock