ReviewsBoat Bilge Alarms

Marine Drain Plug Stainless Steel Boat Drain Plug Kit Oval Garboard Transom Boat Plug with Waterproof Seal Ring for 1 Inch Hole, Thread for 3/4 Inch (2 Pack)

  • Quality Material Selection: our boat drain plugs are made of quality stainless steel, sturdy and solid, reliable and long lasting, strong against corrosion and rust, serving your boat for periods of time.
  • Ingenious Design: our boat drain plug kit has 1 inch hole, thread for 3/4 inch, providing bilge drainage when towed out, and the fixed screw system prevents plug loss, heavy duty for marine garboard.
  • Good Sealing Performance: the garboard drain plug has good tightness, screw thread and O ring provide a watertight fit, meanwhile, this threaded detachable plug allows discharge of the bilge when the ship is towed out of the water.
  • Timely Replacement: you will receive 2 packs of stainless steel drain plugs with 4 screws, utility boat discharging supplies for garboard use or replacement, and you can use them with confidence.
  • Versatile performance: the transom plug has a wide range of applications, suitable for ship stern, fish well, freezer, or boat and yacht, proving you with a better using experience and efficiency.
Check Stock

DasMarine DC12V in-Line Marine Blower 270 CFM Intake: 4\ Marine Bilge Air Blower White

  • √ Little Noise: The noise is just the amount of air moving through the blower,the sound is very little compared to the amazing output and low amp draw..
  • √ Wide Application: The air blower allow the engine compartment, kitchen and bilge to be ventilated.It can be used as a defroster fan,also can cool down the amplifier installed on the boat,it can cool a amp rack and bathroom ventilation etc..
  • √ Six Blade Fan: Puts out plenty of air,ABS plastic,small but very strong quiet operation..
  • √ Easy to Install: With mounting stand,vertical or horizontal installation are both ok.
  • √ Package Included: 1 pack marine boat electric bilge air blower.
Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas Gray Quart

  • TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
  • CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
Check Stock

TotalBoat-488366 TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas White Gallon

  • TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
  • CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock

BBH Marine Boat Plastic Thru Hull Fitting Drain Fits 1\ Inch Hose

  • This fitting should be used above the waterline..
  • Our Thru-Hulls are meant for installation through the transom and are good for overflow use in livewell installations or as an exhaust port for a bilge pump..
  • Their construction is designed to resist degradation as a result of chemical and saltwater exposure..
  • Thru hull bilge fitting for Marine/Boat/Yacht..
Check Stock

attwood Sahara MK2 500 GPH 12-Volt Automatic Bilge Pump

  • 500 GPH, 12V, Fuse size: 3A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Check Stock

Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter：1 1/8\) (1100GPH)

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock

Star brite Super Orange Citrus Bilge Cleaner - Biodegradable , 1 gal

  • Harness the power of citrus extract to leave your boat bilge clean & fresh smelling.
  • Quickly emulsifies & dissolves tough oil, grease & transmission fluid.
  • Biodegradable formula is easy to use: Just pour in, run boat, then pump out.
  • Safe for all fiberglass, metal & plastic surfaces.
Check Stock

OASIS MARINE Automatic Submersible Boat Bilge Water Pump Marine Plumbing 12v 750 GPH Automatic with Float Switch Built in 3/4 inch Hose Outlet

  • 750 GPH 3/4 Inch Hose Outlet 20 amp 12volt Bilge Pump.
  • Rugged water tight impact resistant housing Stainlessshaft Blocked Marine Boat wiring.
  • All in one Bilge Pump & Float Switch No additional float switch required 3 wire can be used as auto with switch or both.
Check Stock

NRS Kayak Bilge Pump One Size

  • The NRS bilge pump makes it easy to remove unwanted water from any open boat.
  • No hose necessary as the water will spray out over the side of your kayak or canoe.
  • The full length foam float ensures it won't sink if you drop it in the water.
  • Pumps 8 gallons per minute for quick emptying of your boat.
  • Bright color makes it easy to find, even in dim lighting.
Check Stock