ReviewsBoat Fender Clamps

Affordura Boat Fender 4 Pack Boat Bumpers Fenders with 4 Ropes, Boat Bumpers for Pontoon Boat Fenders Inflatable (Black, 6.5 inch)

Warranty and package- FBA Prime shipping. Two years warranty offered by Affordura boat fender. The package contains 4x 6.5 inch boat bumpers for docking, 4x the same color boat fender ropes, 1x air pump and needle, 1x storage bag..
Well protection- Keeps your boat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear..
Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 50 seconds to inflate..
Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side..

Check Stock

Marine and Rv Direct 4 Boat Fenders 6.5” X 23” Vinyl Ribbed Bumper Dock Shield Protection Includes 7 Foot Long 3/8s Braided Fender Lines & Pump to Inflate

5 year Warranty given by us on all of our Ribbed Boat Fenders. The package contains #4 Ribbed Boat Fender Bumpers, #4 Seven Foot boat fender Lines, #1 air pump, and needle to inflate.
Keeps your boat from getting scratched and damaged when tied up at the dock or when tied up to other boats. Reinforced eyelets. The Ribbed boat bumpers fenders can be hang vertically or horizontally. Made for everyday use. These Ribbed Fenders are made of soft vinyl and won’t scratch your boat.
Simple to inflated with the pump included.
Please see sizing picture in the ad. To select the correct size for your boat if you are going to be docking in open lake prone to high winds or in an area where your boat is prone to other boats wake (non no wake zone), one size larger is recommended. Place #1 for every 10 foot of boat length with a minimum of 3 fenders along one side.
Our Ribbed Fenders are Rust protected and come in sizes from: 6.5” x 23.
8.5 x 27” (Double Eye) 8” x 20” and 10” x 28” (HTM, Hole through the middle). See sizing chat in Pictures for the right fender for your boa....

Check Stock

Turmaster Boat Fenders 4 Pack 4.5'' x16'', Ribbed Twin Eyes Boat Fenders Bumpers for Docking, Inflatable Boat Bumper with 4 Ropes, 4 Needles and 1 Pump,Blue

⛵【Perfect Protection for Boat】 Our Boat Fender certainly execute an outstanding job at safeguarding your boat during waves and features great buffer effect, protecting boats from damage caused by heavy collision between hard surfaces, especially when the boat speeds into the shore or even when two boats collide accidentally. And It could also be an good choice as an anchor buoy..
⛵【Marine-Grade Material & Practical Design】 Our Boat Bumpers are made of marine-grade PVC, features shock resistance, anti-corrosion and UV resistance.
Seamless one-piece construction prevents from splitting up and features a high performance of compression resistance.
with ribbed on all sides increase friction and resist abrasion, making it strong enough to withstand external force extrusion..
⛵【Reinforced Twin Eyelets Design】 Designed with reinforced molded eyelets on both ends, and the eyelets are reinforced to prevent breaking in daily use. You can hang the boat fenders vertically or horizontally with the two eyelets according to your needs, easy to install & disassemble and help the boat fenders for docking attach to boat more firmly..
⛵【Equipped with Fender Lines & Pump】 Comes with 4 Pack Boat Fenders (4.5'' x16''), 4 Fender Lines (6.5ft in length)....

Check Stock

Taylor Made Products 950824 Super Gard Inflatable Vinyl Boat Fender, 8.5 x 26 inch, White

OPTIMAL PROTECTION—Know your boat is fully protected with our boat fender’s double-molded ends that resist ripping and tearing, and added strength stands up to the stress of compression and flexing against docks or other boats. A new level of protection.
INNOVATIVE DESIGN — Engineered for top-performance, the one-piece seamless construction and Super Gard’s ribbed fendering technology make this fender the top-seller among boat owners. This high-quality fender is designed to safeguard your vessel.
VIBRANT COLORS — Our fenders are available in a variety of custom colors with a high gloss finish. You are sure to find the perfect shade to match your boat with our patented color matching process to your boat’s gelcoat. It’s hard to pick just one color.
LONG-LASTING QUALITY — Made with the highest quality marine-grade vinyl, these boat fenders easily withstand the harshest elements, including long-term UV exposure and salt water. These Taylor Made fenders stand up to damaging conditions.
VERSATILITY— Our fenders have multiple applications and can be hung from your vessel either vertically or horizontally on boats 15' to 35', giving you options for your docking and mooring needs.

Check Stock

BTG GEAR Pair/Set of 2 (Two) Inflatable Boat Fenders/Bumpers in Black, 5.5" x 20", w/ Free 6' Fender Lines & Pump

FOR BOATS UP TO 21’ – These BTG Gear Ribbed Boat Bumpers are great for boats up to 21’ in length..
INCLUDES FENDER LINES – Includes two 6’ long fender lines for easy hanging in any situation..
INCLUDES FREE SPORTS BALL PUMP – Includes a free sportsball pump for easy inflation of the boat fenders (fenders come deflated).
HANG HORIZONTALLY OR VERTICALLY – The bumpers can be hung horizontally or vertically..
SUPER SOFT MARINE VINYL – Each boat fender is made from super soft marine vinyl that is not marking and is meant to protect your boat even in the most severe conditions..

Check Stock

Mucky Nutz, MugGuard, Long

Fender profile will work with tires up to 47mm wide.
Compatible with 700c/28"/650B/27.5" wheels.
53mm profile must fit between seat stays and fork legs.
Fender eyelets or frame clamps (sold separately) are required for mounting.
3.0mm V-Stays and Stainless Steel hardware.
Installation difficulty rating: 8 out of 10. Install time is roughly 1.5 hours. Tools are required for installation..

Check Stock

Boaton 4Pcs Double Braid Nylon Fender Lines, Boat Bumper Lines, Pontoon Boat Accessories, 6ft

【ONE YEAR WARRANTY】Buy with confidence, our product provide ONE YEAR WARRANTY from date of purchase..
【PERFECT FOR FENDER LINES】Fender tie-up is a breeze with these fender lines. It has a built-in loop on one end that eliminates knot tying and makes adjustment easy..
【GIVE YOU A PEACE OF MIND】These lines are sturdy. They are holding up to boat fenders very well with the rough waters and strong winds. No afraid of losing your fender any more..
【PERFECT SIZE FOR DIFFERENCT DOCKS】Six foot length is just right for all heights above the water that you need to put the boat bumpers. 3/8" diameter make it a breeze to attach to boat fenders with both center hole and eyelet designs..
【NYLON MATERIAL】Double braided nylon is ultra strong with a higher tensile strength than other dock lines materials. Very durable, strong, flexible and soft, comfortable in hand, easy to coils, withstanding the wear and tear of tethering the fenders in busy water..

Check Stock

Dreizack Boat Fenders for Docking 4 Pack 6.5''x23'' Boat Bumpers with 4 Ropes,Air Pump,Needles and Storge Bag,Thickened Material,Perfectly Protect The Boat

【New Products Promotion！】【STRONG CUSHIONING】3.8mm thicker material,full-length molded ribbed,oval shape design enhance the puncture and abrasion resistance of the boat fenders.
【DOUBLE EYELET DESIGN】Reinforced molded double holes,it can be hung vertically or horizontally. Equipped with 4 solid braided MFP fender lines(6ft),less kinked than typical boat fender lines,helping to keep boat fenders at correct height you need.
【MARINE GRADE EMBOSSED VINYL】Boat fenders for docking are made of marine vinyl rotomolding,UV stabilized and chemically resistant. It can be protected from the effects of salt water or discoloration of shipcleaner.
【EASY TO INFLATABLE】With a pump and 4 needles.Each of pratical boat bumper has an inflatable hole.Seamless one-piece construction is convenient to operat,easily inflate or deflate the fender to desired pressure.
【EASY TO STOAGE】Dreizack Boat bumpers are recommended to use for medium size boats that are no longer than 30 feet.With a storage bag that can save you the trouble of storage.

Check Stock

SKS P35 Black Chromoplastic Longboard, Bicycle Fenderset (Tires Sized 700 x 20-28)

Fender profile will work with tires up to 28mm wide.
35mm fender profile must fit through seat stays and fork legs.
Fender eyelets or frame clamps (sold separately) are necessary for mounting.
Installation difficulty rating: 8 out of 10. Install time is roughly 1.5 hours. Tools are required for install..

Check Stock

The Great Bungee - Adjustable Boat Fender Clips - Quick Attach Hooks for Boat Bumpers - Bumper Hangers for Boat/Pontoon - Boating Accessories for Fenders - 4 Pack

QUICK & EASY USE: Simply slide your fender line through the bottom of the Boa hook and clip onto boat rail. The cam allows the fender line to adjust....
SAFE: The gated clip with a lock and release bottom ensures maximum safety when secured to your boat or pontoon. It is extremely reliable when needing....
HIGH QUALITY MATERIAL: The hook is made from ABS plastic, which is durable and ready to take on all weather conditions. They will also not scratch,....
MULTI-USE: In addition to using these hooks on your boat, they can be used in a variety of other activities, including fishing, kayaking, camping,....
CONVENIENT 4 PACK: These boat fender hooks come in packs of 4 and fits up to 5/8 Inch lines..

Check Stock

SKS P65 Black Chromoplastic Longboard, Bicycle Fenderset (Tires Sized 26 x 2.1-2.35 )

Fender profile will work with tires up to 2.35" wide.
65mm fender profile must fit through seat stays and fork legs.
Fender eyelets or frame clamps (sold separately) are necessary for mounting.
3.4mm V-Stays and Stainless Steel hardware.
Installation difficulty rating: 8 out of 10. Install time is roughly 1.5 hours. Tools are required..

Check Stock