ReviewsBoiler Pipe Fitting Tube

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • ... to a Honda Generator or any other compatible generators. The generator then can intake the fuel from the external tank and it can extend the operation time..
  • [Composition]: This kit includes one long fuel pipe with automatic lock.
  • two short fuel pipes connected to the fuel tank cap and two fuel tank caps. The tight fitting of the fuel pipe prevents oil leakage..
  • [Advantage]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
  • [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
  • [Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the fuel cap.In use, as for the users except Honda generator users, the tank should be placed at a higher position than the generator, using gravity to transport oil.Carefully rotate the fuel t....
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

EVIL ENERGY AN6 Flare Cap Tube Fitting Hex Head Port Fitting Adapter 2PCS Aluminum

  • 6AN Flare Cap Tube fitting maximum pressure of the fitting is 4000psi (275bar) and the working temperature range is -65º F to 252º F, manufactured....
  • AN flare caps will block off fuel hose line prevent dirt and debris from entering the external threaded hose fittings and adapters..
  • Female pipe plug nut fitting universal application for Diesel, E85, Water,Air Line. The surface is black anodized for great appearance and....
  • Accessories can be used either temporarily or permanently. Cap block off nuts are 100% reusable..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a product and service..
Check Stock

12 Pack Pipe Insulation Foam Tube Pre Slit Self Adhesive Foam Pipe Covers Polyethylene for Outdoor Indoor Water Pipe Pipeline (0.8 Inch)

  • Sufficient Quantity: you will receive 12 pieces of pipe insulation foam tubes, with the size of 2 cm/ 0.8 inch in diameter of the middle hole, 1 cm/ 0.4 inch in thickness, 40 cm/ 15.7 inch in length, ample quantity can meet your using needs.
  • Quality Material: the foam pipe insulation is made of foam, with flame retardant on the surface to prevent fire, safe and reliable to use.
  • Self Adhesive: the water pipe insulation tube is self adhesive, will form tightly seal after removing the protective paper, not easy to fall, reassuring to use.
  • Practical Function: the outdoor pipe insulation cover is suitable for hot and cold pipes, which can save resources by stopping condensation, and can prevent heat loss, fitting to prevent water pipes from freezing in winter and sweating in summer.
  • Convenient to Use: the foam insulation tubing is equipped with the pre cutting slit, which makes it easier to open and install on the pipe, bringing much convenience for your installation.
Check Stock

PEROMI 170 Pcs Single Ear Hose Clamp 11 Sizes 1/4-1 Inch Stepless Stepless Cinch Rings Crimp Assortment Kit for Water Pipe Plumbing and Automotive Use

  • [Include Size]This fuel line clamp kit set comes with 7 common sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 9.6-11.3mm,9.8-12.3mm, 12-14.5mm, 13.7-16.2mm,15.3-18.5mm, 17.8-21mm, 20.3-23.5mm, 22.4-25.6mm,all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
  • [Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.Hose clamps are used to seal various types of hoses..
  • [Leak-Proof] These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using..
  • [Easy to Use] The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection..
  • [Application] Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
Check Stock

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

Folding V Head Pipe Stand

  • Stand has 2,500 lbs. capacity with higher load rating to handle most pipe fitting jobs..
  • Adjustable height from 32 in. to 48 in. for maximum versatility..
  • Small 25-inch footprint (7 in. folded) takes up less space in the work area..
  • Oversized 10-inch V-head and oversized square tube legs and braces allow for increased durability..
  • Stand features a 1-1/2-inch acme rod for long operating life and durability..
Check Stock

Home Intuition Foiled Back Ceramic Fiber Pipe Wrap Insulation Tape Roll for Indoor Outdoor Water Pipes Fire Rated 2300F 3”x25’

  • The First of Its Kind – An industry-first solution for high temperature pipe insulation, this roll combines the best qualities of ceramic insulation, pipe wrap, and heat tape for water pipes into one extremely effective tool..
  • Easy to Install 25′ Roll – The first and only ceramic insulation to come in a convenient roll for easy pipe wrapping. Save time and cut costs on installations. Simply wrap the pipe, and secure. Dimensions: 3 inches wide x 0.25 inches thick x 25 feet long. Non-adhesive..
  • Energy Saving Insulation – Foil backed insulation locks in heat and reduces wasteful heat radiation loss on hot water pipes. Material is energy saving with low thermal conductivity, to increase efficiency and lower heating costs..
  • High Stability and Strength – High temperature pipe insulation that is fireproof up to 2300 degrees F. Safe fire rated pipe insulation with excellent chemical stability and industrial grade durability for long service life..
  • For Hot and Cold Pipes – Perfect for boiler and heater pipe insulation, pool pipe insulation, AC line insulation, AC pipe insulation, exterior pipe insulation, and insulation for pipes outside and in. Helps prevent moisture and condensation buildup on cold water pipes..
Check Stock

1/2 Inches Escutcheon Flange Plate Pipe Cover for 5/8 Inches OD Copper, PEX, and PVC plumbing Pipe Stainless Steel Chrome Plated Escutcheon Pipe Wall Cover (12)

  • Size details: the size of flange cover is about 16 x 10 x 50 mm/0.5 x 0.4 x 1.97 inches, fitting for 1/2 inches nominal copper pipe (5/8 inches OD).
  • Reliable material: the escutcheon flange cover is made of 304 stainless steel, which has nice heat resistance and corrosion resistance to many corrosive agents, and can be applied for a long time.
  • Easy installation: the flange plate cover can be easily cut with a utility knife and installed around the pipe to increase the decoration of the pipe.
  • Decorative: when the pipe passes through the wall, it will leave an unsightly surface.
  • The plate pipe cover can be decorated with a tube cover, and it can also cover up the spaces to maintain a clean appearance.
  • Wide application: the escutcheon plate can be applied in various occasions, such as, home, office, shopping mall and so on, which also can be installed with water supply devices, like kitchen faucets, sinks, toilets, dishwashers, refrigerators and so on.
Check Stock

Baru Decor - Two Hole Pipe Strap for 3/4 Inches Pipe Fittings U Bracket, Pipe Clamps for Pipe fixing, Black Metal Tension Clips, Industrial Pipe Shelf, 8-Pack

  • ✓  Please note these Pipe straps fit for 3/4" Pipe Fitting Tube. This is ideal for Industrial Pipe Shelves and racks to fix the planks. It’s better to be safe than sorry, right? Without the straps, the shelf could easily move around on the pipes..
  • ✓ Safety & Style: They are easy to screw on the planks. Not only make the shelves super secure but they also add an extra detail that makes the shelves look even better..
  • ✓ High Quality Black Metal: Our U brackets Pipe are made with steel and highly resistant to corrosion and dust. They are highly resistant to corrosion and rust and last forever!.
  • ✓ Suitable for Décor and shelf units: Our Pipe straps are suitable for decoration you can décor your room with industrial Pipe shelves, a chic book rack. These U brackets can be fixed in any surfaces and support structures. They are strong enough to hold your pipes safely..
  • ✓100% CUSTOMER SATISFACTION GUARANTEE - We offer an easy customer service & email support. Please contact us for an easy and fast replacement or return it for a free refund. Nothing to worry about! USA Company based in San Diego, CA.
Check Stock

SeonFook 6 PCS Swaging Tool Drill Bit Set 1/4-Inch Hex Shank HVAC Tool Copper Pipe Flaring Bits Portable Tube Expander Drill Bit Repairing Kit 1/4 3/8 1/2 5/8 3/4 7/8

  • 【Swaging Tools】 Come with 6 different sizes: 7/8'', 3/4", 5/8", 1/2", 3/8", 1/4".
  • Hex Shank Diameter: 1/4 inch. They can meet your various work....
  • 【Flaring Bit Set】Made of high quality bearing steel for durability and long life. Flares drill bits have high and uniform hardness and wear....
  • 【Pipe Expander】The innovative drill bit expander for expanding tubes using heat by friction way more surface of between the flare and the Valve.....
  • 【Copper Pipe Swaging Tool】When air conditioning is installed, expand copper tube, make two copper tube mutual link (The drill bit is installed on....
  • 【Drill Bit Expander】This swages tool present a perfect depth and a tight fitting, which will make the brazing easier, reducing the fatigue stress....
Check Stock