ReviewsBolt Cold heading Machine

Edelbrock 8552 Head Bolt Kit , Black

Hardened and parallel-ground washers are included with 170, 000 PSI.
Reduced head eliminates the need for valve train removal.
Used on the following Edelbrock heads: EDL-6022, EDL-6025, EDL-6032, EDL-6035, EDL-6037, EDL-6039, EDL-7716, EDL-7721, EDL-7728 and EDL-7729.
Can also be used with 351W heads on 289-302 block as long as EDL-9680 bushings are also used.

Compatible with deck heights of 53 to 60 inches.
Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
One-piece construction for easy assembly.
Shipping dimensions -118” x 17” x 26”.
Limited Lifetime against cracking and fading.
Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..

Thread Diameter: 8mm (M8), Bolt length 16mm..
Material: high quality nickel plated carbon steel.Antirust and long life..
High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.

Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.

A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..

Material: high quality nickel plated carbon steel.Antirust and long life..
Thread Diameter: 6mm (M6), Bolt length 12mm..
High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.

Material: high quality nickel plated carbon steel.Antirust and long life..
Thread Diameter: 5mm (M5), Bolt length 20mm..
High quality T head screws for aluminium extrusions, suitable for 20mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.

...: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
Wide Application: The screw and bolt extractor can work on Allen bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts to name a few. Meanwhile, comes with a box which make it so portable for easy carrying..

When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened.
When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf.
Round bolt head requires only a punched hole.
Special design of guide and flat sided bolt tip to prevent bolt rotation.
Bolt throw is 3/4″ with a 7/8″ vertical adjustment.
Rod Length is 12″, which is measured from the center of the flush bolt body to the bolt tip.

Auto adjust drill press Clamps allow fast one hand clamping on drill press, machine tops or benches - 3" jaw..
Use mounting ring for bottom mount on drill press, or use 5/16 *18 button head T bolt for bench mounts.
Features armor's "best in Class" auto adjust technology - set the pressure, and change material size without readjusting Clamp..
25-400Lbs of consistent tip pressure over the 2.5" jaw opening range.