ReviewsBolt Tailpipe Extractor

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

DURATECH 15-piece Impact Bolt & Nut Remover Set 3/8” Drive Bolt Extractor Socket Tool Set with 2 Hex Adapters Storage Box Premium CR-MO Steel Made SAE & Metric

  • Premium Material -- DURATECH bolt extractor socket set is made of durable & high hardness chromium molybdenum steel with black oxide surface, which....
  • Excellent Compatibility -- Bolt extractor set includes 13 extractors - (1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4”, 10mm, 12mm, 13mm,....
  • Tight Grip -- The special internal thread design provides maximum gripping power, which can engage with the damaged screw tightly and quickly pull out....
  • Easy Removal -- DURATECH extractors set will allow you to remove the mildly stripped or heavily rusted bolts with ease. Fix on the bolt head with....
  • Convenience -- The bolt extractor set comes with tool box, which is very easy to put it into your bag or take it anywhere you want. Inside the box,....
Check Stock

Segomo Tools 13 Piece Lug Nut and Bolt Extractor Removal Metric and SAE Socket Tool Set 8-19mm | Lug Nut Remover | Bolt Remover | Lug Nut Extractor | Extractor Set | Lug Nut Removal Tool - NBE13819MM

  • [ Easy To Use ] Our lug nut remover is designed with left-hand spiral for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Every Size You Need ] This nut extractor set comes in sizes: 1/4, 5/16(8mm), 3/8, 10mm, 7/16(11mm), 12mm, 1/2, 13mm, 9/16(14mm), 5/8(16mm), 17mm, 11/16, 3/4(19mm). Can be used on SAE and Metric sizes.
  • [ Will Last In Time ] The lug nut extractor set is made from black chrome molybdenum that provides greater strength and durability and prevents corrosion. Our extractor socket set will be with you for years..
  • [ Versatile Design ] The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws. You can use this bolt extractor set on different projects..
  • [ Used With Multiple Tools ] 3/8 square drive of each bolt extractor tool can be used with flat wrench, pliers, socket wrench, adjustable wrench, Vise-Grip locking pliers, hand ratchets or impact wrench guns and air ratchets. Lifetime warranty.
Check Stock

Segomo Tools 10 Piece Lug Nut Remover & Bolt Extractor - Metric and SAE Extractor Set - 10-19mm Stripped Bolt Remover & Nut Extractor Set - Stripped Lug Nut Remover Kit - NBE10919MM

  • [ Extract Even Damaged Bolts & Nuts ] Remove even the most stubborn nuts, bolts, lugs, studs, hex screws, and more. The left-hand spiral of each piece of this nut anad bolt extractor set is desgined for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Different Metric & SAE Sizes ] Work on different jobs with this extractor socket set. It offers the following sizes: 9mm 10mm 11mm (7/16) 12mm 13mm 14mm 15mm 16mm(5/8) 17mm 19mm (3/4) Can be used on SAE and Metric sizes.The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws..
  • [ Will Last For Years ] Our bolt & nut extractor kit is made from black Chrome Molybdenum that provides greater strength and durability and prevents corrosion. You will be able to work with this tool for years!.
  • [ 3/8 Drive Socket Set ] You can use our stripped lug nut remover with 3/8 square drive for use with socket wrench or impact wrench gun..
  • [ Stay Organized ] This lug nut & bolt extractor tool comes supplied in a durable case so that you can keep the set organized and easily transport it between different jobs..
Check Stock

TOMMARS 15 Pieces Impact Bolt & Nut Remover Set Bolt Extractor Set Lug Nut Remover Tool with Solid Storage Case for Removing Damaged Frozen Rusted Rounded-Off Bolts Nuts

  • [EXCELLENT QUALITY] The bolt extractor set is made of 40Cr-MO chromium-molybdenum steel, which is harder than the common 40Cr-V chromium-vanadium....
  • [MULTIFUNCTIONAL TOOL] This impact bolt & nut removal tool is precisely designed to easily remove damaged, peeled, rusted, rounded-off, or frozen....
  • [ABUNDANT SIZES] 13 pieces of 3/8-inch drive nut extractor set adopt SAE (in) and metric (mm) sizes: 1/4", 5/16"(8mm), 3/8", 10mm, 7/16"(11mm), 12mm,....
  • [PERFECT DESIGN] The bolt extractor kit adopts a plum blossom-shaped internal thread right-hand design, and the reverse groove design provides....
  • [HIGH QUALITY PACKAGING] The base and socket of the stripped bolt remover are engraved with dimensions for easy identification. All sockets are fixed....
Check Stock

RWYMQWT Stripped Screw Extractor Set and Damaged Screw Extractor Kit Easy Out Broken Bolt Remover Screw Remover Set Made From H.S.S 4341 High Speed Steel With Hardness 63-65hrc

  • 【 Durable】The Screw extractor is made from 4341 high quality speed with 65 HRC hardness, which the density and hardness are about 20 percent....
  • 【5 - Pieces Bolt Extractor Set】This Damaged screw extractor kit (#0/#1/#2/#3/#4)works with most drill and all the screw size or bolt (3-12mm),....
  • 【Easy To Use】It's a very simple step. Just select a drill bit smaller than the damaged screw and you can easily remove the damaged screw. Please....
  • 【 Titanium】We have added a layer of titanium to the screw extractor, which makes the stripped screw extractor removes easier to store, does not....
  • 【Useful】Suitable for hexagon socket bolts, square head screws, wood screws, hexagon head screws, mechanical screws, sheet metal screws and other....
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Autarboor Exhaust Tip 3 Inch Inlet, 3' Inlet 4' Outlet 12' Long Mirror Polish Stainless Steel Bolt-On Exhaust Tailpipe Tip Slant Cut, Rolled Edge

  • 【Dimension】 Standard with 3 inch Inlet, 4 inch outlet, 12 inch overall length, bolt-on exhaust tips. Universally applicable to vehicles with 3 inch outer diameter of exhaust pipe..
  • 【Special Design】With elaborately mirror polished to keep your vehicle look cool style and new shiny look instead of the rusted old tailpipe. Slant cut design can drain your exhaust tailpipe timely.
  • 【High-grade Material】Made of high quality material stainless steel, strong anti-corrosive, durable exhaust tip, can greatly protect your original pipe from the sun and rain, avoid rusting and deformation.
  • 【Easy installation】Bolt-On exhaust tip don’t require welding or drilling operations, just simply slide the exhaust tip into the exhaust pipe and tighten it with a wrench.
  • 【Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product.
Check Stock

Lisle 71500 Exhaust Manifold Template for Dodge

  • Tapered Bolts center base plate over bolt holes and slip fit bushing allows you to move from hole to hole without moving base plate..
  • The screw Extractor is then used to remove the broken bolt..
  • Includes bushing to drill to tap size when Extractor cannot be used..
  • Double Sided drill depth gauge to make sure water jacket is not pierced..
Check Stock

Lug Nut Remover 6 Pieces Twist Socket Set Extractor Tool Metric Bolt and Lug Nut Extractor Socket Tools

  • ...orque &Tight Grip】This stripped lug nut removal tool is in plum-shaped internal thread design provides excellent torque.
  • The unsmooth concave wall inside is more conducive to firmly wheel lock and quickly remove the worn lock bolt and rusted, damaged lug nut with less effort.
  • 【Center Punch Bar】A hex top on the extractor makes it easy to use a wrench instead of a ratchet. The extractor may bite together with the broken bolt. After removing it, please use the center punch to knock the bolt off the extractor..
  • 【Multi-Application】17mm, 19mm, 21mm,22mm 27mm and 5 different size nut extractors and an extra metal rod can meet the various needs of the usual needs, they easily pop a removed nut from your extraction sockets, whether it is car repair, remove damage nuts, can provide you with Great convenience..
  • 【BUILT TO LAST】The hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.
  • Black oxide finish resists rust and corrosion.
  • 【USE WITH YOUR TOOLS】1/2-inch square drive fits your wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (not included).
  • 【CUSTOM CASE】This bolt extractor and lug nut remover set's blow-molded case provides easy organizatio....
Check Stock

Dsycar 1.5 - 2.25 Inlet Exhaust Tip Blue Burnt Slant Cut Stainless Steel Blue Burnt Adjustable Inlet Universal fit Pipes Diameter 1.5-2.25 inch -Gift Free 4 Valve Stem Caps Straight/Blue Burnt

  • 【 Note 1 】This Tip Fits Pipes From 1 1/2 inch To 2 1/4 inch pipe Diameter. Please Measure Your Pipe Diameter..
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type..
  • 【 Note 3 】View product details image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose....
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Two bolt fit the tip to your pipe..
  • 【Car Decoration】Surface polishing + Grilled blue process. Exquisite workmanship, shiny bright and cool colors.Extra 4Pcs colorful car tire valve....
Check Stock