ReviewsBook For Circuit Analysis

D Debra Audio AU400 Pro UHF 4 Channel Wireless Microphone System with Cordless Handheld Lavalier Headset Mics, Metal Receiver, Ideal for Karaoke Church Party (with 4 Handheld (A))

Debra Audio AU400 4 channel wireless microphone system.(Two set freuqncy point: A- 501/511.5/524/538.5 B-506/517.5/531/546.5).
These series products adopt UHF frequency and use the international standard common frequency which can be used in all over the world..
Due to the low frequency and many reasons, traditional wireless microphone usually disturbed by many factors especially by the variety of harmonic which send off by the CD/DVD/VCD/LD and other any digital equipments..
Squelch circuit usually analysis the intensity of the RF frequency channel instead of the noise and the needed signal. Using the low traditional wireless microphone in the complex environment or when the signal of the microphone is week or the microphone is closured, the squelch circuit many suddenly opened which result the receiver send out a strong burst of noise..
It ideal for church, small DJ KJ stage, birthday wedding or family party, conference, classrooms, small karaoke night etc..

Check Stock

Kramer 860 4K UHD HDMI Pattern Generator & Analyzer

4K60 4: 4: 4 HDCP 2. 2 HDMI 2. 0 18G Signal Generator & Analyzer.
Max. Resolution — 4K@60Hz (4: 4: 4). standards Compliance — HDMI 2. 0, DVI 1. 0 and HDCP 1. 4/2. 2.
Data path analysis — source and sink up to 18G HDMI signals (6G per Graphic channel). analysis of HDMI data packet.
Analysis & Control of HDCP v1. 4 and v2. 2. Analysis & Emulation of EDID Data — Including SCDC. Analysis of Input Audio Signals..
HDR Bypass & Analysis Support. HDMI Timing Generation — Up to 4096×2160 @60Hz (4: 4: 4), 8–bit..

Check Stock

FLIR ETS320 - Thermal Imaging Camera Solution - Targeted for PCB's and electronic devices in the lab

320 x 240 IR sensor offers more than 76K non-contact points of temperature measurement, eliminates guesswork by pinpointing hot spots and potential points of failure..
Sensitive enough to detect temperature differences smaller than 0.06°C, for fast identification of faults and thermal gradients..
Measurement accuracy of 2°c aids in attaining quality assurance and factory acceptance of printed circuit boards..
Ergonomically designed for lab electronics measurement, the ETS320 is battery powered, Wireless, and hands free..
With complete measurement and analysis on the camera, the ETS320 measures small components down to 150 µm per pixel spot size, from a minimum focus distance of 70mm..

Check Stock

InfiRay Xinfrared P2 Thermal Camera for Android Smartphones, Smallest Imager Infrared Imaging Camera, 9g Fully Metal Body, 256X192 IR Resolution, Night Vision Go APP Installation( Android Only)

...P2 Night Vision Go Thermal Camera Imager is a high-performance thermal camera that uses a VOx detector to provide clear images in low-light or no-light conditions. The thermal camera is designed specifically for use in any applications where clear, accurate images are required..
49000 TEMPERATURE DATA~SECONDARY ANALYSIS: The InfiRay P2 Night Vision Go Thermal Camera Imager is a device that captures thermal images and records temperature data. It can be used for secondary analysis to help identify hotspots..
SUPPORT ANDROID 6.0 AND ABOVE: InfiRay P2 Night Vision Go Thermal Camera Imager is a high-tech product that supports android 6. 0 and above. It has a built-in thermal camera that can detect and display the surrounding environment in real-time. It can used for Safety at Night,Hidden Camera Detection,Circuit Board,Building HVAC..
BATTERY-FREE DESIGN: InfiRay P2 thermal camera make easy to use with mobile and no need extra battery and device is compacted. Made with high quality and you can make good thermal camera experience with InfiRay P2..

Check Stock

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
⚡【Application】1.Power circuit measurement and malfunction analysis.
2.Motor drive of frequency converter (or other electronics) measurement.
3.Power electronics equipments measurement..
⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..

Check Stock

OWON SDS1104 100MHz 4 Channels Digital Desktop Oscilloscope 1GS/s Sample Rate Portable Oscillometer

"Multi-Function :Waveform storage function,16 sets of waveforms can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed. One-Click show all measurements,built-in 39 types of auto measurement,convenient to view the waveform information. FFT spectrum analysis function, supports for Hamming, Blackman, Rectangular, Kaiser, Bartlett.".
【Widely Used Oscilloscope】- With multiple trigger functions and more than 30 kinds of automatic measurement functions,Vmax, Vmin, Vpp, Vtop, Vbase, Vamp, Vavg, Vrms, Cycle RMS, Cursor RMS, Overshoot, Preshoot, Freq,etc,apply for electronic circuit debugging, circuit testing, design and manufacture, education and training, automobile maintenance and testing..
[100% SATISFACTION GUARANTEE]- With rich experience,advanced technology and safe,efficient new design,we will offer you a satisfactory shopping experience.You also can enjoy 1-year quality assurance on our Digital Storage Oscilloscope..

Check Stock

Hantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio

⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
⚡【Application】1.Power circuit measurement and malfunction analysis.
2.Motor drive of frequency converter (or other electronics) measurement.
3.Power electronics equipments measurement..
⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..

Check Stock

Agastat TE Connectivity 7022AC Time Delay Relay 120VAC Off-Delay 1.5 - 15 Seconds

...vide the DLL dynamic link library, routines to write their own applications. Intuitive, fast hardware filter settings.Added USB protection, CAN bus protection circuit..
Double way USBCAN II debugger can be used as a standard CAN bus, CAN bus is CAN bus equipment product development, testing, a powerful tool for data analysis.
at the same time, the USBCAN debugger has the characteristics of small volume, convenient insta.
Compatible universal USBCAN device.Single channel maximum reception capacity more than 14000 frames per second, the highest transmission capacity of 3000 frames per second,Do not crash, do not lose frame.Dual channel at the same time when receiving the highest reception capacity of 8500 frames per second.Support CAN relay function, realize the 2 CAN channel data at different baud rate under transparent transmission..

Check Stock

ImmunoLytics DIY Mold Test Kit for Home - Easy to Use Professional Mold Testing Kit - Individual Room Screening Package for 5 Rooms

TEST KIT: Each mold test kit contains detailed instructions, 5 test plates, stickers and labels, UV proof storage pouch for wrapping plates post-testing, return shipping box, and a Lab Analysis & Consultation Form. We offer online video tutorials showing you how to test your home and how to interpret your results..
RECOMMENDED AREAS: We recommend you test for mold in areas such as your attic, basement, bedrooms, car, kitchen, laundry room, den/great room and your office at home and work. Each test plate is sufficient for a 14 foot by 14 foot room or approximately 200 square feet..
TO TEST: Once you receive your home mold test kit, register your kit at Immunolytics.com/register. Then, follow the step by step instructions that are included in your test kit. Our test kit tests for mold, such as black mold, as well as yeast and all other molds associated with poor air quality..
SELF ANALYSIS: You may analyze your results at home via our Self-Analysis option. Visit Immunolytics.com/self-analyze to learn how to self-analyze. Wait 4 to 5 days for mold to develop. Analyze once visible..
LAB ANALYSIS: When you choose to have analysis done at our state of the art lab, our highly trained analysts perform a quantitative analysis of your sample and, if mold spor....

Check Stock

IDEAL INDUSTRIES INC. 61-164 SureTest Circuit Analyzer, CATIII 300V AC

LOOK BEHIND WALLS: SureTests "look behind walls" to identify wiring problems that lead to shock hazards, electrical fires, or equipment issues. Personal shock hazards stem from poor grounding, false grounds, and/or no ground fault protection..
EASY-TO-USE CIRCUIT ANALYSIS: Checks for various wiring conditions (correct wiring, polarity reversal, no ground). Gives access to measurements of line voltage, voltage drop under a full load condition, ground-neutral voltage and line impedances..
SUPER BRIGHT DISPLAY: 128 x 64 OLED display with backlight and large, easy-to-read numbers so you can always see the correct reading..
IDEAL QUALITY: Family-owned, professionally run company with a long history of building relationships, providing top customer service and setting industry standards. We’ve been committed to the craft and its craftsmen for over 100 years..
PRODUCT DETAILS: Weighs 9.4 oz (267g). Includes 1’ plug adapter, carrying case, instruction manual. Optional alligator clip adapter available. Measures voltage drop under 12, 15 and 20-amp loads..

Check Stock

Replacement for Mac Book Pro Charger, Compatible with Mac Book Pro 13 Inch Display AC 60W L-TIP Shape Connector Power Adapter（Before Mid 2012）

Input ： AC 100-240V, 1.5a, 50-60Hz/output: 16.5V, 3.65a.
60W Magnetic 5-pin DC Connector helps guide the plug into the system for a quick and secure connection.And an amber light lets you know that your notebook is charging, while a green light tells you that you have full charge.
Compatible with Mac Book models (until Mid 2012): replacement charger AC power adapter for Mac Book Pro 13 inch released before Mid 2012: Mac Book Pro (13-inch, Mid 2012), Mac Book Pro (13-inch, Late 2011), Mac Book Pro (13-inch, Early 2011), Mac Book Pro (13-inch, Mid2010), Mac Book pro(13-inch,Mid2010),Mac Book pro(13-inch,Late2009),fits A1184/A1344/A1330/A1435 ..
Maximum protection safety: This power adapter has been manufactured with the highest quality materials and includes multiple smart features, against over current, over voltage, over load, short-circuit protection and auto recovery, Certificated with CE/FCC/RoHS standard.
Superior Performance: Mac Book pro charger prides itself in its excellent performance. It will charge your Mac Book quickly without compromising its performance and longevity, making it the best companion for your precious Mac Book.

Check Stock