ReviewsBoost Control Valve

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

Stage 2 Boost Cooler™ Forced Induction Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)

  • Adjustable Boost Activated Progressive Water-Meth Delivery.
  • Low Level Monitoring & High Flow Check Valve.
  • Includes: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive VC-50 Controller/Harness, (1) 1', (1) 2', (1) 5' Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve.
Check Stock

Orange Two Stroke Active Dual-Parametric EQ/Boost Guitar Effects Pedal

  • Tone Control - An extremely powerful active EQ, the TONE control adjusts the high frequencies by giving a +/-15dB boost/cut to those frequencies.
  • Pre Gain Switch - Selects between 3 varying levels of gain for each boost circuit: High -Voiced for heavy breakup/lead tones.
  • Med - Voiced for mild breakup/rhythm tones.
  • Body Control - An extremely powerful active EQ, the BODY control adjusts the low frequencies by giving a +/-15dB boost/cut to those frequencies.
  • Boost Control - sets the overall level of boost available from the PRISM. Think of the BOOST control as a master volume that works in tandem with the PRE GAIN switch to dial in the ratio of gain to boost level.
  • Circuit Select - Selects between the 3 boosts circuits: COLOR - Vintage Silicon Treble Booster Style boost. Perfect for Brian May (Queen) style rhythm and lead tones!.
  • AMP - A very musical sounding MOSFET boost that emulates the tonal response of an overdriven vacuum tube amp!.
  • TRANS - An ultra transparent 18V powered JFET boost circuit. Sounds like you only LOUDER!.
Check Stock

A/C Compressor Control Solenoid Valve Replacement for 2013 2014 2015 2016 2017 Nissan ALTIMA 2.5 L SL SV

  • FITMENT - A/C control solenoid valve Replacement for 2013-2017 Nissan Altima.
  • A/C Compressor Control Valve made of high quality material, has experienced quality tested to ensure easy installation, optimal performance and durability enhancement..
  • Please verify the control valve on your factory compressor looks like the part pictured. Please note that these AC kits will only fit the vehicles original OEM AC compressors and will not fit an aftermarket compressors.
  • When the compressor solenoid valve doesn't blow cold. You should consider that whether there is a failure on your compressor solenoid valve. Replace the control valve on your with our replacement valve and your air conditioning will be good.
  • Service-If you have any problem or issues, please without any hesitation to contact our after-sale service via email, we will do our best to help you.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • ...ehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
  • Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. ....
Check Stock

GAZOZ PERFORMANCE Vacuum Tap Turbo Boost Gauge Sensor Adaptor Adapter for BMW F20 F30 316 320 N20

  • This auction is for VACUUM Tap Turbo Boost Gauge  Sensor Adaptor For BMW 320 328 N20.
  • This adapter installs between the boost sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge..
  • Content: one piece of boost adapter and screws.
  • Required basic knowledge to installation boost gauges in cars.Feel free to contact with us to confirm car model.
Check Stock

MEIMEI Multi-Way Soda Bottles Shrimp Eggs Incubator Hatchery Artemia Hatchery kit DIY Aquarium Fish Tank Hatch Tool (3 Way Hatchery kit)

  • Step 1:Install all accessories as our picture with your air pump and soda bottles, add suitable water and salt ,brine shrimp eggs into your soda bottles, air control valve opened and brine shrimp outlet control valve closed, turn on your pump..
  • Step 2: After the hatching of the brine shrimp eggs, stop the pumping and let stand for about 10 to 30 minutes. The hatched shrimps will sink to the bottom and the shrimp shells will float up..
  • Step 3: Close air flow control valve, open brine shrimp outlet control valve to collect brine shrimp..
  • Package include:Soda Bottle Hatchery Capsx3+ 1-way control valvex3+ 3-way control valvex1+oxygen pipe x 3M+check valve x3.
Check Stock

Purge High Boost Purge Valve Kits with Gasket Fits for Bendix Air Dryer 12V Kenworth Peterbilt AD-IP AD-IS Replace 801266 065612 K022105 Set Silicone Grease

  • Fitments: Purge high boost valve set fits for Bendix, fits for AD-IS Air Dryer 12V, fits for Kenworth and Peterbilt 801266, fits for AD-IP Air Dryer....
  • Replace Part Premium Quality: Replace OE number 801266 065612 K022105. Premium quality purge high boost purge valve, contructed of premium material....
  • Convenient Installation: First you must make sure that your air tank is zero, then exhaust all the air, take out the brake cleaner, clean the....
  • Packing Include: 1 high pressure purge valve + 1 snap ring + 1 large washers + 1 small washers + 1 white small washer + 1 silicone grease. Before....
  • Customer Service: You will get 24-months service, hassle-free return and money back policy, buy with confidence! If you have any questions, please....
Check Stock

Motorcraft DPFE6 Exhaust Gas Recirculation Pressure Feedback Sensor

  • [Fitment] - 7.3 IPR valve + ICP control sensor fit for Ford E-350 Club Wagon 03, fit for Ford F-250 F-350 F-450 Super Duty 99-03, fit for Ford F-750 99-03, for Ford F-250 Super Duty 01-03, fit for Ford E-350 Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in ....
Check Stock

2 Wire Turbo VGT Solenoid & IPR Pigtail Harness Replacement for 6.0L Ford Powerstroke & Chevy GMC Duramax 6.6L

  • Variable Geometry Turbo (VGT) Solenoid, Injection Pressure Regulator (IPR) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness..
  • Compatible with 6.0L Powerstroke Turbo VGT Solenoid (AKA Boost Controller) and IPR Valve 2003-2010 (2003 2004 2005 2006 2007 2008 2009 2010)..
  • Compatible with 6.6L Duramax (LLY/LBZ/LMM/LML/LGH) Turbo VGT Solenoid (AKA Boost Controller) 2004-2016 (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016)..
  • Female Socket 2-Wire Pigtail Adapter Connector Repair Harness Kit For Ford Power Stroke, Navistar, And GM Duramax Engines..
  • You will get: 1x Connector Adaptor Wiring Harness..
Check Stock

RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)

  • SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
  • HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
  • CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
  • MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
  • EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
Check Stock