ReviewsBore Pulley

BZ 3D GT2 Pulley 60 Teeth Bore 8/5mm 60T Timing Pulley Synchronous Wheel Aluminum for Width 6mm 3D Printer Parts (Pack of 4pcs) (60Teeth Bore 8mm)

• 【High Quality Material】- Timing belt gear is made of aluminum alloy, sturdy and durable,surface oxidation treatment, anti-rust and anti-corrosion effectively.Deburring is carried out at the threaded hole, which is not easy to wear the synchronous belt, also can increase the service life of the synchronous belt..
• 【Feature】- Timing Pulley contact with the tooth side which minimizes the risk of the belt slipping.Accurate tooth surface of inner hole, less runout and more stable..
• 【Application】- The XL size aluminum pulley wheel is suitable for general torque transmission design and high speed transmission design. Timing Pulley is widely used in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
• 【Package Contents】- 1Pcs x Timing Pulley..

40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines

• The ROP Shop replacement 40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines.
• Specs - 7 1/2" Diameter. 3/4" Bore. 3/16" Key. Engagement Range: 1600- 3300 RPM. Refer to images 2 & 3 for more information.
• Includes - (1) Backplate, (1) Integrated Jackshaft, (1) 10T Sprocket, (1) 1" Driver Clutch Pulley, (1) 3/4" Driven Clutch Pulley, (1) Drive Belt, (1)....
• Fits 8HP-18HP Go Kart engines with 1" Straight Crankshaft & 1/4" Keyway, if this converter kit is used on engines larger than 18hp, the belt will burn....
• For some units, the driven clutch will need flipped around when mounted, please refer to image 7 for reference.

scottchen PRO 3' Heavy Duty Garage Door Pulley Kits, 3/8' Arbor 200LB Load, 4 Sheave Pulleys, 2 Clevis Forks, 4 Bolts and Nuts Kit

• 【Function】This 3in garage door pulley kit designed to repair or replace damaged parts of your old, worn, noisy and jumping doors. Provide a quiet, smooth and pleasant door opening/closing..
• 【Compatible】The 3in sheave pulley is 3/8” bore and 3/8” cable groove, which adapt to most commonly garage doors and accept max 5/16” diameter pulling cable or straps..
• 【Valued Package】The package include 4 pulleys and 2 clevis forks, this can be used as 2 fixed pulleys plus 2 sliding clevis wheel pulleys, fulfill your various demand. Coming with 4 screws and nuts, saving your time to look for from drawer or corner..
• 【High Quality】The garage door pulley system is heavy duty, 200lb load rating for doors up to 400lb. Durable steel construction, center race with 9 ball bearings and pre-lubricated in factory for smooth sliding..
• 【Kindly Reminder】Professional installation is recommended. If DIY, please remember wearing safety guard always, using the proper tools and install properly..

Cool Blower Fan 4010 40x40x10mm DC 24V Hotend Cooler Radiator for 3D Printer DIY Parts Accessories

• The silver color synchronous wheel is made of aluminum alloy with a high finish. Used in conjunction with timing belts, realize synchronous....
• Package Content: 1pcs x Timing Pulley Wheel.
• The transmission is accurate and stable with high efficiency, there is no sliding when working, it has the functions of buffering and damping, low....
• There are two 90-degree countersunk screw holes on the tooth surface, which can be fixed by tightening the screws. If there is a tension pulley, you....
• Tips: Screws are not included in the package..

ZRM&E 5PCS 20 Teeth 5mm GT2 Timing Belt Pulley for Width 6mm 3D Printer Parts Accessory

• Type: 5pcs GT2 Timing Belt Pulley, Come with 1 hex wrench, and matched M4 fastening screw, which has been already screwed in the pulley..
• High Quality: Adopt high quality aluminum, excellently machined, finished smoothly, durable to use, perfect choice for 3D printer or similar projects..
• Specification: 20 teeth, 5mm inner bore, 16mm height, fit for 6mm width GT2 timing belt and 5mm shaft stepper motor..
• Special Design: Rounded teeth can engage with belt longer, flange design admits synchronizing shaft rotations, provides a smoother and high power transmission..
• Application: Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..

PAGOW 2 Kit GT2 Synchronous Wheel 20&60 Teeth 5mm Bore, Aluminum Timing Pulley with 2 pcs Length 200mm Width 6mm Belt (bore 5mm(2pcs a Set))

• Pulley outside diameter is 2.55 inch, 1 Groove.
• Inner diameter: 5/8 inch, Bore type:Fixed Bore.
• Cast iron for resistance to wear and galling.
• Standard V-belt Sheave Use with A, 3L & 4L (A & AX) V-Belts.
• Enjoy a smooth&worry-free return service within a month.

Saiper GT2 16 Teeth 5mm Bore Timing Pulley Aluminum Synchronous Wheel for 6mm Belt, Compatible with RepRap 3D Printer Prusa i3 (5pcs)

• Teeth: 16T, Bore Diameter: 5mm. Total size: 14*14*14mm.
• Synchronous Wheel made of high quality Aluminum Alloy, excellently machined, finished smoothly and longer service life.
• Contact with the 16 tooth side which minimizes the risk of the belt slipping. Applies to 6mm width belt!.
• GT2 16 Teeth Timing Pulley providing a smoother transition between belt, good performance for 3D printers.
• GT2 timing belt pulley system especially suited for linear movement and positioning. Widely used in 3D printer, milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.

LIFTMASTER Garage Door Openers 108D36 Lens Cover by LiftMaster

V-Belt Pulley,1 Groove,8.00\ O.D.

• V belt drive pulley is a compatible replacement part for Chicago Die Cast 200A.
• Through Bore : 3/16" , Groove Angle : 34° , Inside Diameter: 3/4" , Outside Diameter : 2" , Width : 5/8".

LASCO 05-1190 Evaporative Swamp Cooler Round Blower Pulley, 1-Inch x 12-Inch

• The product is manufactured in United states.
• The product is highly durable and easy to use.

HONG YI-HAT GT2 Idler Pulley Without Tooth Timing Belt Pulley Wheel 3/5MM Bore Width 6MM 3D Printer Parts for prusa I3 MK3 MK3S Drone Spare Parts Size Bore 5mm

• Bore 3mm: For Prusa I3/MK2.5/SMK3/MK3S, etc.
• Bore 5mm: For Wanhao I3 and other FDM printers.