ReviewsBoring Bar Coolant Cable

4\ BORING HEAD SET 6 PCs CARBIDE BORING BAR WITH R8 SHANK 4 INCH BORING 1'' MILL

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

• For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
• Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
• Equipped with a split bushing to accommodate a boring bar of smaller diameter.
• Precision ground and hardened. Completely sealed for maintenance free operation.

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

• MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
• WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
• COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

• ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
• ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
• ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
• ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
• ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..

VEVOR Mag Drill, 0-300 RPM Stepless Speed Electromagnetic Drill Press, 2\ Depth 2\ Dia Magnetic Core Drill, 2922lbf Boring Tool Drill Press, 1680 Watts Drill Press, Yellow and Black Drill Machine

• 1680W Strong Power: Built to stand by you on toughest job sites. Powerful motor: 1680W, 110V, 60HZ, 10A. Max Boring Depth: 2inch/50mm. Max Boring Diameter: 2inch/50mm. Max Travel Distance: 8.5inch/216mm. Main function: drilling and coring. Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits..
• Stepless Speed & Cooling System: Our magnetic base drill bores at 0 - 300RPM. Its stepless speed control knob provides a more precise speed. Coolant tank with 300 mL capacity, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
• Powerful Magnet: The electromagnetic base is made of almost pure iron and has a strong magnetic force up to 2922lbf/13000N, ensuring that the machine does not move during drilling..
• Considerable Details: Ergonomically designed lifting handle, three extended crank handles coated with nonslip rubber and external carbon brush allow you to operate the mag drills with minimum effort..
• Versatile Application: This versatile mag drill press is ideal for ship & bridge building, industrial and steel fabrication, windmill & power-plant construction, railway manufacture, equipment installation, and many other fields..

JoyFans Coolant Pressure Tester Kit, Cooling System Coolant Vacuum Refill Kit Automotive Tools Works on Radiator Leak Test & Coolant Fill Purge Service for Cars Trucks Airlift

• Radiator pressure tester kit performs one-stop cooling system service from leak detection to coolant filling. Professional tools and adapters are complete and suitable for most domestic and foreign vehicle models. Saves you from worries. Simple to use. Use the radiator pressure pump to pressurize the system, locate & troubleshoot leaks. Use the coolant refill tool (work with vacuum pump) to change coolant in vacuum..
• Coolant pressure tester kit fits GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other domestic and foreign cars, trucks, airlifts, etc., while working with 20PCS dedicated adapters for one-person operating. Fits most models while working with the cone universal adapter, but 2 people are required to operate (one person holds the cone head and the other one pumps up). Manual tester pump with gauge calibrated from 0-35psi /0-2.5bar..
• Pneumatic vacuum coolant purge refill tool gives efficient flush while feeding the system with fresh coolant under vacuum. Quick and clean technique allows no trapped air to remain. Features quick coupling design. Working range: -60~-50 cmHg (-23~-20inHg). Operate with specific adapters and universal adapter, this cooling system refill tool can fit almost all types of vehicle models, one person ....

Boring Head Set, Carbide Boring Bar MT2 -M10 F1-12 50mm Boring Head with 9pcs 12mm Boring Bars Milling Machine Accessories for Boring and CNC Milling Machine Tools

• SUITABLE FOR : The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
• USED FOR : This tool set is made of high quality material, good wear resistance, and durable in use.It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
• PACKAGE LIST : This tool set contains 1 x drawbar thread: MT2 M10*1.5 1-1/2"-18UNF,1 x F1-12 50mm boring head with 12mm hole accept ,9 x boring carbide tips with 12mm shank,3 x keys ,1 x plastic case.
• QUALITY ASSURANCE :100% brand new and the quality of our products is guaranteed.We supply fast and convenient return or replace service to insure purchasing without worries. If you have any questions about our products,please feel free to contact.

JRT 5pcs 16ER AG60 External Threading Inserts + 16IR Internal CNC Lathe Indexable Carbide Insert Blade for Tool, Gold, length: 16mm ,pitch :0.5-3.0mm

• ☞ Inserts Size: 16ER- 3/8" right hand . Partial profile: 60 degree, Pitch : 0.5--3.0mm, insert length:16mm. Suitable for machining Stainless steel and Steel parts.
• ☞ Inserts Feature: carbide with PVD coating , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
• ☞ Boring Bar Size: Internal left hand holder, 5.9"/150mm long , 0.51"/ 13mm high, Screw size : M3.5 x 10, T15 wrench.
• ☞ Boring Bar Feature : Strong steel as material, laser lettering on holder. Anti-rust oil wiped on holders to prevent from oxidation. Plastic box packing ,easier to store..
• ☞ Package Includes: 1× SNL0013M16 Boring bar + 10pcs 16ER AG60 Carbide inserts + Wrench T15.

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

• Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
• Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

• 【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
• 【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
• 【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
• 【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
• 【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

• Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
• Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).