ReviewsBoring Bar Tool Bit

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

  • For use with AXA tool post 250-100 or 250-111. up to 12" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

HHIP 1/2 INCH C-6 9 Piece Boring BAR Set (1001-0002)

  • Shanks are made of special heat treated alloy steel. | Three lengths for each minimum bore size..
  • Quality tool designed to be used as a boring tool bit..
  • All shanks are held to 0.000 - 0.0005" from the nominal size..
  • Grade C-6 for all types of steel and general purpose..
Check Stock

Rockwood Air Hammer 4 Chisel Set Kit Requires 4CFM

  • High-Performance 4500 Bpm (Blows Per Minute) Design For Quick And Efficient Operation..
  • It Accepts Any Standard 0.401 in. Parker Taper Shank Air Hammer Tool Bit And Includes Four Of The Most Popular Tool Bit Configurations..
  • Shank Capacity: Standard 0.401 in. Inch Parker Taper & Bpm: 4,500 Free Speed & Air Consumption: 4 Cfm [113 L/Min] 90 Psi [6.2 Bar] & Max. Operating Air Pressure: 90 Psi [6.2 Bar] & Inlet Thread Size: 1/4 in. Fnpt.
Check Stock

Rok Hardware 35mm Hinge Boring Forstner Drill Bit, Blue ROKBB35BLUE

  • PERFECT SIZE - 35mm hinge boring bit for boring concealed cabinet hinge holes.
  • CLEAN HOLES EVERY TIME - Fine blades built into this 35mm forstner bit for euro hinges.
  • Drilling Diameter: 35mm (1.37") Shank Diameter: 9mm (0.35") / Shank Length: 64mm (2.5").
  • Hinge Boring Bit Total Length: 79mm (3.1").
  • Fits most of the leading electric drill sizes in the market..
Check Stock

Hyper Tough 44 Piece Ratcheting Screwdriver Set

  • 123 PIECE SET- This set includes every tool and fastener you would need for a basic set for DIY projects and basic home repairs. It’s a great....
  • QUALITY CONSTRUCTION- Each tool and bit is made of heat-treated steel making them durable enough to stand up to daily use. Whether you’re making....
  • CARRYING CASE INCLUDED- This tool set comes with a durable, 600D Oxford cloth bag with carrying handles. The bag has an extra wide opening for easy....
  • FUN COLOR- These aren’t your average, boring tools.  The pink color of the handles and bag makes the tools a great gift for a wife, girlfriend or....
  • PRODUCT DETAILS- Bag Materials: 600D Oxford Cloth. Bag Dimensions: 15” x 9” x 10”. Opening Dimensions: 15” x 9” x 10”. Tool Materials:....
Check Stock