ReviewsBoring Bar Tool Kit

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

  • For use with AXA tool post 250-100 or 250-111. up to 12" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.
Check Stock

Watch Link Removal Tool Kit, Watch Band Tool Kit, Spring Bar Tool Set for Watch Repair and Watch Band Replacement with Small Hammer, Professional Watch Strap Remover Repair Tool, 108PCS Spring Bar

  • ⌚【Professional Portfolio】 Watchband tool kit comes with a spring bar tool and 3 extra spring bar tool tips for removing the strap. And a watch link remover,6 extra links remove spring pins,a small hammer, a watch band holder, 4 punches pins for watch band adjustment. This kit also equipped with 108 spring bars, 20 watch links, cleaning cloth, and instruction manual. A comprehensive set of tools satisfied the daily maintenance needs of the watch..
  • ⌚【Multi-way Adjustment of the Link】 Watchband tool kit contains two different watchband removers and 6 sizes(20pcs) watch links. Watch link remover can be used in up to 1.18in wide watch band replace and can be removed 0.19in thickness of the strap, effectively remove watch link and adjust strap length. Use the watch band holder with the small hammer and punch pins can remove the watch link and insert it..
  • ⌚【Ideal for watch strap replacement】 The stainless spring bar tool with spring bar tool tips helps you easily remove the strap between the case and the watch, equipped with 18 sizes of spring bar (0.32in~0.99in), 6 for each size) and 3 pcs extra spring bar tool tips. Suitable for the replacement of 0.32in~0.99in wide watchband, the stainless spring bar tool is the ideal tool for strap repla....
Check Stock

Turning Insert Holder SVJCL 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 100mm Length.

  • 3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Bike Repair Tool Durable Dog Bone Shape Hexagon Wrench, Zinc Alloy (10 in 1) 6-15mm Bicycle Wrench Heavy Duty Reinforced Spanner, Multifunction Wrench Tool for Mounting Cycling

  • WIDELY APPLICATION - Use for bike multifunction tools,multi tool,bicycle repair kit,bike repair kit,mechanic bicycle,bicycle tools,bike tools,bike multi tool,bike tool kit,bicycle tool kit,bicycle multi tool,bicycle multi tool park,park bike tool kit,park bicycle tool kit,bicycle spoke wrench set,park multi tool,bike kit,bicycle emergency repair kit,mtb multitool,bicycle repair tool,bike emergency repair kit,bike repair,carbon repair kit,mechanics multitool,watch spanner wrench,bike tool kit set.
  • CONVENIENT TO USE - Use for bike repair kit,bike tools,bike tool kit,bicycle tool kit,mountain bike accessories,bike tool,bike multitool,road bike accessories,bike accessories for men.Compact bone shape design, light weight, convenient to carry, a perfect tool for emergency need while riding.Unique design in that it easily transforms into a versatile tool.
  • 10 in 1 hex wrench, a must for any cycling enthusiasts.Features 10 universal sockets meet your common needs.
  • DURABLE MATERIAL - Use for bike tire repair kit,bike accessories,bike accessories,bicycle accessories,bycicles accessories,bike pouch,bike backpack,bike accessories for women,bike tire,bike chain tool,bike bags under seat,bike,bike odometer,spoke wrench,saddle bag bicycle,bicycle speedomet....
Check Stock

OSCARBIDE 9 Pieces/Set 1/2"Shank Nickel Plated Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Metal Lathe Tools for Turning Grooving Threading Cut Off Tools

  • 1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders.
  • Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Lathe turning tool holders Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item:B0BHWBR7V8 on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OXA #4 Quick Change Heavy Duty Boring Bar Tool Post Holder OXA 250-004

  • For use with OXA tool post 250-000. 6-8" swing.
  • Holds 3/8" with bushing (1/2" diameter without bushing).
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
Check Stock