ReviewsBoring Mill Tool

STANLEY File Set, Mill Bastard File, Single Cut with Handle, 8-Inch (21-106)

Flat File Tapered In Width And Thickness For General Material Removal.
Single Cut Mill Pattern For Light Removal Of Material.
Bastard teeth spacing for general-purpose tool sharpening and material smoothing.
Bi-material handle reduces vibrations and is slip-resistant.
Single-Cut Mill Pattern For Light Removal Of Material.
Bastard Teeth Spacing For General-Purpose Tool Sharpening And Material Smoothing.

Check Stock

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..

Check Stock

SENDUO 3/8\ Indexable Carbide Turning Inserts Holder Set for Machining Lathes, 5 Pcs Set Metal Lathe Tools Inserts Bits with Carbide Inserts TCMT110204.

Top quality indexable lathe bits with replaceable tips. Inserts can be rotated to a new cutting edge without changing the position of the tool holder!.
Set includes 5ps precision 3/8" shank tool bits with C6 carbide inserts, 5ps spare insert screws,2ps wrenches , 1ps wood case and 1ps blade..
2 Pcs. style "A" 0° for turning, facing, boring, and chamfering (AR & AL).
2 Pcs. style "B" 15° for turning, facing, boring, and for lead angles (BR & BL).
1 Pc style "E" 30° for turning, facing, boring, chamfering, threading, and V-grooving.

Check Stock

End Mill Extension Holder SLD3-C8-100L Straight Shank Diameter Tungsten Steel Side-Fixed Mill Extension Holder for CNC Milling Cutter Tool

Premium Material: This end mill extension holder is made of tungsten steel material, high hardness and not easily damaged..
Side-Mounted: This end mill extension holder adopts high-accuracy side-mounted extension rod for easy installation..
Deep Cavity Processing: This mill extension holder is suitable for deep cavity processing..
Strong Shock-Resistant: This end mill extension holder has extremely shock-resistant and easy to operate..
Protect Function: The holder can protect the tool and guarantee the processing effect..

Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manu....

Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

8mm and 10mm End Mill Set, Material : Tungsten Carbide.
End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
Equipped with a split bushing to accommodate a boring bar of smaller diameter.
Precision ground and hardened. Completely sealed for maintenance free operation.

Check Stock

R8 End Mill Holder, 5PCS R8 End Mill Holder Set Alloy Tool Steel R8 Sleeve British Side Fixed Type 1/4 3/4in End Mill Holder Kit Fit for Milling Lathe R8 Spindle

Premium Quality Material: This end mill holder is made of alloy forged tool steel, rugged and durable, which is enough to ensure a long time use..
Application:Hardened and ground milling machines, which for better durability and performance..
Well-made Processing: The surface of the face mill cutter arbor is quite smooth, which offers a comfortable feeling and nice appearance..
Easy to Use: This end mill holder set is suitable for both double ended and single ended, which is more convenient..
Suitable Type: This end mill holder is suitable for milling machines with R8 spindles.The set includes 5 sizes of end mill holder to meet your various needs..

Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..

Check Stock