ReviewsBosch Table Saw Dado Insert

TS1004 2.5inch Table Saw Dust Collector Bag - by Mowerhub, Compatible with Bosch / Ryobi / Craftsman / Porter Cable and more - Fits Model 4000, 4100, GTS1031, GTS1041A (2)

  • Compatible with Bosch 4000 10-inch tablesaws,Dimensions: L 31" x W 13.7" head side x W 9.8" end side, D of ring 2.5" up to 2 7/8" and other table saws that have 2-1/2 inch dust ports on the exterior of the saw..
  • Premium Quality: Made of high-quality cloth with wire support frame, lightweight design, durable and dependable. Easy to Use: Easy to attach and detach to your table saw. Simply squeeze the spring clamp and slide clamp over tabs on dust port and release spring clamp. The dust bag requires emptying when full of sawdust..
  • Compatible with Bosch Model: 4000, 4100, GTS1031, GTS1041A.
  • Helps keep work area cleaner Collects up to 70% of dust and particles Easily attached and emptied Includes wire frame for attaching bag to table saw's dust port and for support of top seam of bag.
Check Stock

Delta 36-725T2 Contractor Table Saw with 30 Rip Capacity and Steel Extension Wing

  • Powerful 1. 75 Hp Contractor Grade motor easily handles hardwoods.
  • 30 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY.
  • Smooth and dependable adjustable belt drive table saw.
  • Cast iron table top with 2 stamped steel extension wing.
  • Heavy duty rail system for precision cuts every time.
Check Stock

Bosch Model 4000 & 4100 Series Table Saw Zero-Clearance Blade Insert 4130 Approx Dims 13-5/8 in x 3-3/4 in x 3/8 in

  • Insert Dimensions: Fits 4100/4000 series jobsite table saws 13-9/16" x 3-3/4" x 7/16".
  • Made from high-density phenolic laminate with a bonded-melamine surface.
  • Bosch insert insert fits various Bosch models of table saws..
  • Includes leveling screws, side and end adjustment screws.
  • Please check your Length x Width x Thickness of your current insert before ordering to ensure that you get the correct insert..
Check Stock

BOSCH CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw Blue

  • CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without....
  • SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece....
  • CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed....
  • PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive....
Check Stock

DEWALT Dado Throat Plate DW7444

  • Dewalt replacement parts are built with quality and are very durable..
Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

  • NO MORE GUESSING: The DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw.
  • Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately.
  • Easily taper table legs or use for construction and remodeling.
  • VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts.
  • The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs).
  • ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper.
  • Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
  • EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the ....
Check Stock

36-502 Dado Throat Plate Metal Replace for the Delta,compatible with Delta Table saws 36-5000,36-5052,36-5100 36-5152

  • Compatible with Delta Table saws 36-5000,36-5052,36-5100, 36-5152...
  • Also work with any 13/16" X 8" diameter stacked dado.please check the size before purchase..
  • Please pay attention to the position of the tabs during installation, and make slight adjustments if necessary..
Check Stock

BOSCH FSN800 31.5 In. Track-Saw Track

  • Precisely straight 31.5 in. (800mm) track-saw track – manufactured with exacting tolerances to work with the Bosch gkt13-225 track saw and a fully featured track-guidance system.
  • Anti-splinter guard – interlocks with the track to help ensure clean splinter-free cuts.
  • Rubberized traction strips – interlock with the track to helps ensure the track grips the workpiece for non-slip positioning.
  • Quick Connection – tracks can be joined quickly and easily with the fsnvel connector (sold separately).
  • Light, convenient, portable system – easily transportable saw and track system provide an alternative to a table saw.
Check Stock

BOSCH Bare-Tool CCS180B 18-Volt Lithium-Ion 6-1\\/2-Inch Lithium-Ion Circular Saw

  • PRECISION: The Bosch CCS180B Circular Saw Bare Tool has a 6-1 2-inch saw blade capacity and provides the ability to cut through 2-inch thick material at 90 degrees and 1-9 16-inch thick material at 50 degrees..
  • POWER: The cordless saw is balanced and compact with 3,900 no-load rpm and weighing only 6.6 lbs. for an outstanding power-to-weight ratio..
  • CONVENIENT: Featuring a left-blade design for a clear view of cut line when saw's main handle is held in right hand. The cordless saw also provides an adjustable, easy-to-read bevel and a depth-of-cut gauge for consistent locking and improved accuracy..
  • ACCURACY: The saw features the Bosch-exclusive anti-snag lower guard for easing the blade into the work piece and an electronic brake to quickly stop the blade for quick and easy use..
  • DURABLE: The Bosch CCS180B Circular Saw Bare Tool was built to withstand years of the toughest jobs with a heavy-duty aluminum foot and upper guard. It also includes Bosch’s Motor and Cell protection to prevent overload and overheating..
  • The 6 1/2-inch saw blade can completely cut through 2-times material even at full depth of cut.
  • Exclusive anti-snag lower guard for easing into the work piece.
Check Stock

Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening

  • MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and....
  • If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate....
  • Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without....
  • Zero Clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. You can....
  • This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The....
Check Stock

BOSCH Bare-Tool CRS180B 18-Volt Lithium-Ion Reciprocating Saw

  • EFFICIENT: The Bosch CRS180B reciprocating saw delivers 1-1 8-inch stroke to remove more material per stroke. With a Bosch exclusive Lockjaw blade holder for fast one-handed blade changes, this reciprocating saw is built for speed and efficiency..
  • VERSATILE: With 2 included speed ranges, 0-2,400 SPM and 0-2,700 SPM, the reciprocating saw allows you to match the speed of the tool to the application. It easily handles multiple materials.
  • CONVENIENT: The cordless saw also features a variable speed trigger which allows the user to ease into the cut without any kickback. At only 7.6 lbs, the Bosch CRS180B is convenient for over-head cutting..
  • ERGONOMIC: The saw provides an ergonomically shaped handle with comfort zone in the soft-grip area for a secure hold and low user fatigue.
  • COMPACT: The Bosch CRS180B’s compact size makes it easier to get into tight spaces where other reciprocating saws won’t fit. A lightweight tool means less fatigue and this saw delivers the best power-to-weight ratio in its class..
  • Compact size makes it easier to get into tight spaces.
  • 2-speed allows you to adjust to the material your up against.
  • Lock-Jaw blade holder is the easiest blade change system.
  • 1 1/8" stroke allows for more material to....
Check Stock