ReviewsBostitch 3 Tool Compressor Combo Kit

Air Compressor Valve Plate Metal Part Accessory Replacement Set 3/8in 48x72mm 1P2.5P3P4P

Ideal kit for powering pneumatic tools, interior and exterior finish work and trim, and handling inflation needs.
Compressor: Oil-free 1/2 HP electric motor for less maintenance.
Compressor: Thermal overload protection prevents overheating and extends the life of the compressor.
Compressor: Steel 3 gallon pancake tank is compact, lightweight, and durable.
Compressor: 2 easy-to-read gauges for tank pressure and output air pressure.
Compressor: Easy carry handle for moving around the house, garage, and job site.
Compressor: 3 no mar anti-vibration rubberized feet prevent the compressor from moving around.
2-in-1 Nailer / Stapler: Compatible with 18 gauge brad nails from 3/8″ to 2″, and 18 gauge 1/4″ narrow crown staples from 1/2″ to 1-5/8″.
2-in-1 Nailer / Stapler: Ergonomically engineered body resulting in a lightweight and rugged tool great for extended use.
2-in-1 Nailer / Stapler: Tool-free finger depth adjust for various applications.

18-gauge brad nailer(HF50SP) and 1-gallon compressor(HC0504G) combo kit is ideal for finish and trim jobs.
HF50SP-Drives 18-gauge brad nails from 3/4'' to 2'', features an adjustable depth-of-drive, 360° air exhaust, quick-clear jam release and no-mar tip.
HC0504G--Features a direct-drive, oil-free pump that ensures clean operation and minimal maintenance. Roll bar design protects vital components.
Compressor Spec. are as follows: 1/2 HP, [email protected], 1 gallon tank, 125 PSI max, low 65 dBA and 23lbs total weight..
Kit also includes air hose with fittings, goggle, wrenches and manuals.

【Fit Part】: Replaces part number A12210 , N011005.
【Overall Length】: 30-1/2" , Half Length: 15-1/4" , Width: 5/8" , Thickness wo/tooth: 0.05" , Thickness with Tooth: 0.065".
【Fits DeWalt Models】: D55146 , D55167 , D55168.Craftsman: 919-16755, 919-16760, 919-16761, 919-16762, 919-16763, 919-16770, 919-16771 and....
【Fit】: Air Compressor Drive Belt Fit For DeWalt, Craftsman, Devilbiss & Bostitch.
【Specification】: 3 X N011005 Air Compressor Drive Belt.

⭐Replaces part number :A12210 ,N011005.
⭐Overall Length: 30-1/2" Half Length: 15-1/4" Width: 5/8" Thickness wo/tooth: 0.05" Thickness with tooth: 0.065" Toothed.
⭐Fits DeWalt Models: D55146 , D55167 , D55168.Craftsman: 919-16755, 919-16760, 919-16761, 919-16762, 919-16763, 919-16770, 919-16771 and....
⭐Air Compressor Drive Belt Fit For DeWalt, Craftsman, Devilbiss & Bostitch.

Fits Models: H27508UWK / A600006. Does NOT fit the "WL" or other series units. Part Numbers: AB-9040019, AB9040019.
40mm ID. This is for the 50mm Cylinder Bore..
This part is installed on top of the piston/connecting rod.Its purpose is to create a seal in the cylinder so that air can be pump into the compressor tank..
If this part wears your compressor will not pump the air properly.This is a wear part and it is advised to keep an extra one on hand..
This part is compatible with the following machines: Bostitch CAP2000P-OF Type 0 Air Compressor CAP2040P-OF Air Compressor CAP60P-OF Air Compressor CAP60PB-OF Air Compressor CAP1512-OF (Type 0) Air Compressor.

of 3/4-Inch Tubing, Debar and Cutter Tool.
175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter.
maximum from the air compressor, up to 4000 sq..

...to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy transportation, safe storage, and quick organization.
CONTENTS: Brake caliper kit includes a holding plate, ....

of 3/4-Inch Tubing, (3) Air Outlet Kits, (2) Tee Fittings, 3/4-Inch Straight Fitting, (20) Pipe Clips, Debar and Cutter Tool.
175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter.
Compression style nickel plated brass fittings.
maximum from the air compressor, up to 4000 sq..

1/2-Inch Drill/Driver In The Cordless Drill Combo Kit Features 283 Units Watts Out, Two Speed Gear Box (0-350/0-1,500), Compact Design (8.25-Inch Long/3.5 Lbs), 1/2-Inch Chuck, Built In Led Light.
1/4-Inch Hex Impact Driver Of The Cordless Tools Combo Kit Provides 1,450 In-Lbs Torque At 2,900 Max Rpm'S And 3,000 Bpm And Is Equipped With A Quick Release Chuck.
Circular Saw Features High-Performance Motor (3,700 Rpm'S) Of The Drill/Impact Driver Combo Kit, 5-1/2-Inch 18 Tooth Carbide Blade ( 2-1/8' Cutting Capacity) And Beveling Shoe (50 Degrees).
Reciprocating Saw Features High Performance Drivetrain (7/8-Inch Stroke Length And 3,000 Spm), Tool Free Blade Release, Variable-Speed.