OONOL 2Pcs 24 Inch Flexible Multicolor LED Car Headlight Strip Lights Waterproof Daytime Running Lights Strip RGB DRL Turn Signal Lights Switchback Light (no disassembling needed)
...des & Accent DRL: 20 cycle modes (including chasing, skipping,dancing, glowing and blinking) give you wonderful visual experience. What is more, 8 solid colors can be chosen to be turn signal or during driving (Red, Blue, White, Yellow, Purple, Ice blue, Green)..
4."Back" botton to reset mode. Driving State: press "back" botton to get 20 cycle modes. Turn Signal State: press "back" botton to set a fixed color as turn signal light.Simple design for you a beautiful, exotic and romantic car..
EASY INSTALLATION: LED flexible DRL strip can be pasted outside or inside headlight assembly easily with adhesive tape (Tip: clean the paste surface before stick).Connecting: Red wire to ACC or front lamp.
Blue wire to left turn light.It can be cut to any size and re-capped and the tail must be insulated after cutting. 24 inch in length, cuttable every 3LED Beads..
Application & Warranty: The led tube light can be used for car headlight, daytime running light, turn signal light, angel eye light, and so on. Universal fit for all 12V auto vehicle (Pay attention: the working voltage is DC 12V, higher voltage may cause a short circu....
Rexka 15pcs M5 Bumper Cover Fog Lamp Hex Head Screw Bolt 07149123885 for BMW E36 E46 F30 E39 E60
Other Names: C-pillar Trim Panel Screw, Fog Lamp Bolt, Guide Bolt, Side Support Bolt, High Mount Lamp Bolt, Support Panel Bolt, Fog Lamp Screw, Lower Trim Panel Screw, Upper Guide Bolt, Air Deflector Bolt, Bumper Cover Mount Bolt, Center High Mount Stop Light Bolt, Led Lamp Bolt, Bumper Cover Screw, Sail Panel Bolt.
Hex Head Screw, M5-2.25 X 17mm, Hex Size:8mm X 8mm, Washer Size: 16mm.
Fake Soda New PRIDE Peace Tea Georgia Peach 32 OZ LGBTQ Safe Diversion Secret Stash Safes Compatible/Replacement for (Peace Tea) Made by Coca-Cola Company LARGE Hidden Storage to Hide Money Jewelry
MEGA BOLT - Extra Large Capacity Diversion Safe with (2) Included Inner Glass Vials.
O-RING SEAL - Bolt Head Incorporates a Rubber O-Ring for an Air Tight and Weather Proof Seal of your Hidden Contents.
REVERSE THREADING - Bolt Head Screws in Place Counter Clockwise to Prevent Accidental Opening and to Foil Thieves.
DIVERSION SAFE - Ideal for Hiding Small Valuables, Bills, Communications, Micro SD Cards and More. Protect Your Privacy.
SPECIFICATIONS - Length: 4.4 Inches | Volume: 3.91 Cubic Inches | 15/16" Diameter Bolt (11/16" Inside Diameter) | High Quality Construction, Made in the USA.
Saiper 10pcs Double Chainring Bolts M8 Chain Ring Bolts for Road Bike Mountain Bike BMX MTB Crankset
Appearance:Advanced anodized painting tech brings exquisite shape comes out the look of fashion style for your bikes.
The bolt is made of 7075 aluminum alloy material with high strength, lightweight, corrosion-resistant and durable.
10pcs Double Chainring Bolts: Nut Shaft Diameter: 10mm. Nut Shaft Length: 7mm. Bolt Head Diameter: 8mm. Bolt Head Length: 7.6mm.
PRECISION AND DURABLE. T6 treated and CNC machined and chamfered. With maximum precision and durability.
Note:only compatible with Double chainring. Use 4mm inner hexagon spanner to install the bolts. Suitable for mountain bikes, road bike, folding bike, fixed gear bike, downhill bike, track bike, MTB, BMX, DH, etc.
Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)
...gs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Fitment: Fits For Harley 2017-2021 Touring Electra Glides, Road Glides, Road Kings, Street Glides,Trikes & 2018-2021 Softails models.(Engine Kit for Milwaukee 8 ).
Attention:May not included every include all engine/motor/transmission/primary and select chassis bolt covers.Individual covers are available for a wide variety of bolt and nut styles..
Beautifully designed caps to cover the raw bolt heads on your engine, transmission, primary etc..Please double check the size and quantity before..
Packaged:46 pcs caps fit 7.5mm-10mm bolt./ 10 pcs caps fit 9mm-12mm bolt./ 6 pcs caps fit 11mm-14.6mm bolt..
DCT Tee Bolt Set – 20 Pack 1in T Bolts for Woodworking T Track Bolts Jig Bolts 1/4in 20 Thread T Bolt
... used to create a router fixture, cabinet hardware jig, drawer pull jig, or other woodworking jigs.
These “T” shaped wood bolts can be used with T nuts, knobs, or T tracks to create a variety of projects.
T SHAPE PROVIDES VERSATILITY: Each piece is precision machined for quality, strength, and accuracy.
T shaped head features a 7/16 x 5/8 inch (11 x 16mm) surface and a 3/32 inch (2mm) thickness and fits inside T-slot track or wooden groove.
These furniture bolts and barrel nuts are ideal when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels.
BUILT TO LAST: Constructed of grade 2 steel for strength, durability, and longevity.
Zinc-plated for resistance to rust and corrosion.
Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten.
PERFECT SIZE FOR YOUR NEEDS: These T slot bolt wood fasteners have a length of 1 inch (2.5 cm) and a thread per inch of 20.
The diameter of the bolt stem is 1/4 inch (.6 cm).
EASY TO USE: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt....