ReviewsBraided Fuel Line

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Check Stock

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
【Warranty】Three months limited warranty & Free lifetime technical support..

Check Stock

Diesel Fuel Injector Return Line Kit Replacement For 1989-1994 Ford Non-Powerstroke 7.3L

【HIGH QUALITY】Long life-span matters, that is why our injector repair kit are made from braided material to protect the rubber hose to ensure it....
【PREMIUM QUALITY】Fuel Injector Return Line kit is made of strong and tough quality materials, which enhance the durability and superior....
【FITMENT】Diesel injector installation kit replacement for ford 1989-1994 7.3L non-powerstroke. NOTE: THE SIZE OF THESE FUEL LINES IS 1/4.
【PACKAGES】Package included: 1X braided fuel line, 18X spring clamps, 16X o-rings, 8X compression copper washers, 4X straight tees, 4X elbow tees....

Check Stock

EVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS

Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
Package Inclued: 2 pcs x 6AN straight swivel hose ends.
EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock

KeeYees 1/4"ID 20-Foot Fuel Line Hose with 30 Pcs Hose Clamps for Motorcycles, Cars, Lawn Mowers, Marine Boat Outboard

★ 20 FEET LENGTH ★ The length is up to 20 feet (6.1m). It is more convenient to tailor and use according to your length needs. In addition, there are 30 Pcs reliable hose clamps in the package. This helps you fix the position and further prevent liquid leakage..
★ BRAIDED NYLON ★ Sandwich design. The nylon braided wire provides better support and makes the fuel line more resilient. It is difficult for leaks to occur. Average service life can be up to 5 years..
★ 30 Pcs HOSE CLAMPS ★ Made of 65Mn Spring Steel. Durable and sturdy, corrosion resistance. The clamps are springy, nice construction and hold well..
★ CLEVER PACKAG DESIGN ★ Similar to the design of a tissue box, you can take out the fuel line in the box according to your needs, then cut it. Also there is a about 9 inch (23cm) ruler at the box, which can roughly measure the length of the fuel line hose..
★ Wide Application ★ KeeYees Fuel Line Hose is universal. Please pay attention to select the correct inner diameter size. Suitable for conveying gasoline, diesel, gas, bio-diesel, fuels in Motorcycles, Ca....

Check Stock

AMS Black Fuel Rail Kit w/ Pulsation Dampener for 2008-15 Mitsubishi Evo X

The AMS EVO X Fuel Rail provides increased fuel flow which is necessary at higher boost levels. This CNC�d aluminum rail comes anodized in Red or Black and includes our signature AMS logo..
With a -6AN (7.5 mm) diameter inlet and outlet it dwarfs the stock rail by over 25% in flow area. This is true bolt on part that will install with your factory fuel lines, fuel pressure regulator and will work with all factory style fuel injectors..
Included in our kit is a -6AN braided fuel feed line that increases fuel flow by 25%. Our line also makes your car safer by eliminating the hard factory fuel feed line that can crack over time from engine vibration..

Check Stock

3/8 Transmission Cooler Hose - 6AN High Pressure Fuel Line Braided Hose For Marine, Car, Engine System, Alcohol, Nitro, Fuel Transmission, Clutch, Power Steering, Oil and Hydraulic (10 FT)

PREMIUM MATERIAL◀The 3/8 transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 35mm..
BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 3/8 inch diameter helps in better flow and intake of fuel. This 3/8 braided hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 fuel line comes as a roll of 10 feet long enough for a wide range of applications..
QUALITY TESTED ◀The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance..
BENDABLE ◀The 3/8 transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves..
WIDE APPLICATION ◀ The 6an fuel line i....

Check Stock

EVIL ENERGY 6AN Fuel Line Kit,AN6 Braided Nylon Fuel Hose CPE 10FT Black&Red

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft..
[Parameter] Working pressure:500psi,burst pressure:2000psi.
Temperature range:-40°F to 257°F(-40°C to 125°C).
[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc..
[Material] Made of CPE synthetic rubber and nylon braided..
[Warranty] EVIL ENERGY provide 6an fuel line hose fitting kit 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message..

Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

...on, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Check Stock