ReviewsBrake Cooling System

Mophorn GO-KART Brake Master Cylinder Kit for 150cc Go Kart Hydraulic Brake Kit Universal Go Karts Brake Kit Kandi Complete Including Master Cylinder, Hose, Caliper, Pad for 150cc

  • High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
  • Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
  • Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
  • Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
  • Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
  • Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..
Check Stock

G2 High Temperature Brake Caliper Paint System Set Blue G2162

  • HEAT AND WEAR RESISTANT - G2 brake caliper epoxy paints are able to resist heat up to 980 degrees! Our epoxy paint system creates an extremely tough, durable, protective layer that is easy to maintain.
  • EXTREME DURABILITY - G2 epoxy brake caliper paint system offers great chemical and physical protection against brake fluids, road salt, dust, dirt, gravel or discoloration.
  • HIGH GLOSS FINISH - This professional paint kit adds a great stylish touch to any brake caliper. This brush on system has advantages over spray- type paint as it dries harder and does not flake and chip.
  • 12 STANDARD COLORS - G2 brake epoxy paint kit comes in 12 different high gloss, heat resistant colors including red, yellow, silver, blue, purple, black, green, white, gold, orange , pink and lime green. Colors for every style!.
Check Stock

G2 High Temperature Brake Caliper Paint Kit - High Gloss, Wear and Heat Resistant, Epoxy Paint System - Dries Hard, No Flaking or Fading Black G2164

  • HEAT AND WEAR RESISTANT - G2 brake caliper epoxy paints are able to resist heat up to 980 degrees! Our epoxy paint system creates an extremely tough, durable, protective layer that is easy to maintain.
  • EXTREME DURABILITY - G2 epoxy brake caliper paint system offers great chemical and physical protection against brake fluids, road salt, dust, dirt, gravel or discoloration.
  • HIGH GLOSS FINISH - This professional paint kit adds a great stylish touch to any brake caliper. This brush on system has advantages over spray- type paint as it dries harder and does not flake and chip.
  • 12 STANDARD COLORS - G2 brake epoxy paint kit comes in 12 different high gloss, heat resistant colors including red, yellow, silver, blue, purple, black, green, white, gold, orange , pink and lime green. Colors for every style!.
Check Stock

Farbetter Mechanical Bike Disc Brake Kit, Including Front and Rear Caliper, Brakes Cables, Brake Levers, 160mm Rotor, with Cable End Tips Caps, Rotating S-Hook Clips, Disc Rotor Adjuster (Black)

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Brake Cable Kit, 1x Disc Rotor Adjuster, 4x Cable End Tips, 2x Rotating S-Hook Clips and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Ideal Replacement: Choose the best for each component, and you can upgrade it in one step with only one purchase. With fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets- Cable End Tips prevents wire core from bifurcating, resulting in uneven force on the wire core off-line.
  • Disc Rotor Adjuster help you to adjust the gap between rotor and caliper easily..
  • Widely Compatible: Suitable for most mountain bike of mechanical disc brake system. Please check the size of your bike and whether it is suitable to install mechanical disc brakes to avoid buying it by mistake..
Check Stock

SHIMANO J03A Resin Disc Brake Pads One Color, One Size

  • 【Compatibility of Pads】SHIMANO J02A/J03A.
  • 【Compatibility of Brake】XTR BR-M9000, BR-M9020, BR-M987.
  • SLX BR-M7100, BR-M7000, BR-M675, BR-M666.
  • 【Life】Under the same riding conditions, the life is 85% of the original Shimano J03A.
  • 【Cooling Finned-Design】Reducing heat build-up and brake fade.
  • provides rapid heat diffusion, and lengthen maintenance intervals..
  • 【Packing List】2 Pairs brake pads for front and rear brake.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

CNC MTB Hydraulic Disc Brake Set,Bike Disc Brake Sets Front and Rear Line Pulling Hydraulic Disc Brake,Red.

  • Braking System:Hydraulic Disc Brake ,Used for brake systems of ordinary bikes, mountain bikes,bmx,fixed gear Bike and road bikes..
  • Excellent Performance:Mountain Bike Disc Brake Kit has excellent braking in extreme weather, smoother than mechanical braking, and faster response than pure hydraulic braking..
  • Cable-Pull Hydraulic Caliper : Front /Rear Disc caliper are made of premium aluminum material with oil clinder driven two -way brake pad movement,Braking is very smooth in the wettest conditions or the steepest downhills..
  • Complete Cable-Pull Hydraulic Bicycle Disc Brake Set: A whole Brake system with 2 Oil pressue cylinder driven Caliper ,2 of aluminum bicycle brake handle lever , 2 of stainless steel 160mm Rotors, 1 set of front and rear brake cables,12 disc brake bolts, 6 Caliper bolts..
  • Compatible Universal Disc Brake Pad: Wildly compatible with Shimano XTR M965 M966 M975, Saint M800, Deore XT M765 M775 M776, SLX M665, Deore LX M585 T665, Hone M601, Deore M535 M595 M596, Alfine S500 S501, Non-Series M545 R505 T605,easy assembly and replacement..
Check Stock

CNC MTB Hydraulic Disc Brake Set,Bike Disc Brake Sets Front and Rear Line Pulling Hydraulic Disc Brake,Red.

  • Braking System:Hydraulic Disc Brake ,Used for brake systems of ordinary bikes, mountain bikes,bmx,fixed gear Bike and road bikes..
  • Excellent Performance:Mountain Bike Disc Brake Kit has excellent braking in extreme weather, smoother than mechanical braking, and faster response than pure hydraulic braking..
  • Cable-Pull Hydraulic Caliper : Front /Rear Disc caliper are made of premium aluminum material with oil clinder driven two -way brake pad movement,Braking is very smooth in the wettest conditions or the steepest downhills..
  • Complete Cable-Pull Hydraulic Bicycle Disc Brake Set: A whole Brake system with 2 Oil pressue cylinder driven Caliper ,2 of aluminum bicycle brake handle lever , 2 of stainless steel 160mm Rotors, 1 set of front and rear brake cables,12 disc brake bolts, 6 Caliper bolts..
  • Compatible Universal Disc Brake Pad: Wildly compatible with Shimano XTR M965 M966 M975, Saint M800, Deore XT M765 M775 M776, SLX M665, Deore LX M585 T665, Hone M601, Deore M535 M595 M596, Alfine S500 S501, Non-Series M545 R505 T605,easy assembly and replacement..
Check Stock

CNC MTB Hydraulic Disc Brake Set,Bike Disc Brake Sets Front and Rear Line Pulling Hydraulic Disc Brake,Black.

  • Braking System:Hydraulic Disc Brake ,Used for brake systems of ordinary bikes, mountain bikes,bmx,fixed gear Bike and road bikes..
  • Excellent Performance:Mountain Bike Disc Brake Kit has excellent braking in extreme weather, smoother than mechanical braking, and faster response than pure hydraulic braking..
  • Cable-Pull Hydraulic Caliper : Front /Rear Disc caliper are made of premium aluminum material with oil clinder driven two -way brake pad movement,Braking is very smooth in the wettest conditions or the steepest downhills..
  • Complete Cable-Pull Hydraulic Bicycle Disc Brake Set: A whole Brake system with 2 Oil pressue cylinder driven Caliper ,2 of aluminum bicycle brake handle lever , 2 of stainless steel 160mm Rotors, 1 set of front and rear brake cables,12 disc brake bolts, 6 Caliper bolts..
  • Compatible Universal Disc Brake Pad: Wildly compatible with Shimano XTR M965 M966 M975, Saint M800, Deore XT M765 M775 M776, SLX M665, Deore LX M585 T665, Hone M601, Deore M535 M595 M596, Alfine S500 S501, Non-Series M545 R505 T605,easy assembly and replacement..
Check Stock

Tekonsha 90885C Prodigy P2 Universal Super Intelligent High Powered Electronic Trailer Brake Control System

  • UNIVERSAL SYSTEM: Universal electronic brake control system designed to make trailer towing safer and easier.
  • FITS 1 TO 4 AXLES: Fits 1 to 4 axle trailers to deliver a signal from your vehicle's brakes to your trailer.
  • BATTERY PROTECTION: Features reverse battery protection for both vehicle and breakaway.
  • MOUNTING VERSATILITY: Numerous mounting options offer versatile installation.
  • INCLUDES 1 BRAKE SYSTEM: Includes 1 electronic brake control system for 1 to 4 axle trailers.
Check Stock