ReviewsBrake Hose Clamp

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

  • 100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
  • EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
  • USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
  • Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
  • 100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..
Check Stock

OTC 4496 Stinger Hose Clamp Pliers Set - 6 Piece Plus Storage Case

  • OTC's Hose Clamp Pliers Set features five different styles of hose clamp pliers and a hose removal tool.
  • Included tools will service most flat-band and ring-style hose clamps.
  • Pliers included are: flat-type hose clamp pliers, offset hose clamp pliers, 45 degree hose clamp pliers, and a set of straight hose clamp pliers.
  • Rugged blow-molded plastic storage case keeps tools contained and organized so they are ready when you are.
Check Stock

6 Pack Hose Clamp Pliers Hose Pinch Pliers Line Clamps for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses, Flexible Hoses, Red

  • 【3 Size to Select】6 hose pinch off pliers for all your projects.
  • measure 6-1/2 inch, 7-5/16inch, 10inch in length.
  • 【Non-Damaging Jaws】Hose clamp pliers are made of safe nylon ,Non-conductive, durable.Rounded jaw edges mean not damage your sensitive auto parts.
  • 【Locking in Place】Hose Pinch plier is designed with non-slip handle and safety buckle which can adjust the position of the buckle according to the size of the hose.
  • 【Easy Operation】Simply to grip the hose pinch plier on the hose and lock it with the safety buckle to free your hands, super easy and convenience.
  • 【Application】Great for use on brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more.
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

Hose Clamps, Stainless Steel Hose Clamp for 1/2 Inch to 1 Inch Hose Pipe Adjustable Worm Gear Hose Clamps Assortment for Automotive Plumbing, Fuel Line, Mechanical Application, 10 Pcs Hose Clamp Set

  • Sturdy & Durable --- Stainless Steel Hose Clamps made of 0.5mm thickness 304 stainless steel (including band, housing and screw). Hose clamp set have the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Pipe Clamp are reliable strong reusable and durable for long-term use..
  • Adjustable Hose Clamps --- The Worm drive Hose clamps are high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/2 inch to 1 inch (14mm-27mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc...
  • Easy To Install --- Hose clamp large has pre-assemble hose clamp fasteners, with through hole process design and slotted holes, steel belt through hole, tight locking and strong torsion force. Hose clips installation just need to use the hose clamp driver to loosen the screw(6mm Flat Head) of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are perfectly suitable for home, industrial, gardening, mechanical, electronic, boat, marine and more. Hose clamps metal are perfect for automotive, seal hoses, water pipe....
Check Stock

DASBET 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools

  • Universal Hose Pliers Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Portable: The hose clamp tool is housed in a hand-held blow molded plastic case with handle for easy car....
Check Stock

Radiator Hose Clamp Pliers Tool - Clamp Tight Wire Tool with 24 Inches Cable - Hose Clamp Removal Tool and Ring Clamp Pliers - Hose Pinch Pliers Type or Flat-band Tools - Wire Long Clip Removal Tool

  • Premium Quality Hose Pliers : Our hose removal pliers mechanic tool is made of high-quality carbon steel with firm grip handles double dipped in rubber for the removal of flat-type or ring-type hose clamp tool, hose removal tool is anti-rust and corrosion-resistant.
  • Application of Hose Grip Pliers: This pinch clamp tool can lose clamps on cars, removes factory spring hose clamp pincer, coolant hose clamps pliers and radiator hoses, automotive clamp allow technicians to access flat hose clamps in hard-to-reach areas.
  • Lock Function of Wire Remover: The hose remover pliers have a ratchet lock that will hold the wire clamp compressed, which can make this hose clamp remover tool a one-handed affair and helps locking pliers mechanism to remove and install metal with ease.
  • Easy Operate Wire Clamp Tool: Radiator hose removal has flexible pipe repair clamp tongs that make the removal and installation of the clip easier, non-slip handles of radiator hose clamp tool assures steady grip, small size makes pliers hose easy to carry.
  • Package Includes - Our automotive clamps tools pack for mechanics includes 1 pieces of flexible hose clamp pliers, pliers size is 3.74 x 8.3 inches (W x L), wire clamps tool is suitable for clamps with a diameter of 0.7 - 2.1 inches..
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock

ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps

  • Function: Precision clamps at the ends of flexible cables allow extensions where other models hose clamp pliers are not accessible, while heavy duty 24-inch flexible cables allow for use in any position. The hose pliers also have a locking mechanism that holds the clamp in the open position for easy removal and installation of the clamp..
  • Premium Quality: The hose clamp pliers are made of high quality material with extra sturdy carbon steel cable prevents twisting and breaking, the hose clamp removal hook set also has durable chromoly vanadium construction..
  • Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
  • Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
  • Package Included: The hose removal too....
Check Stock