ReviewsBrake Hose End Fitting

FTIHTRY 500CC Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer

Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
Heavy-duty construction allows for strength and durability..

Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..

Check Stock

EVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS

Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
Package Inclued: 2 pcs x 6AN straight swivel hose ends.
EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....

Check Stock

Attwood 93806MUSD7 Mercury Fuel Line Kit, 6 Feet Long, 3/8-Inch Diameter, Multi-Layer Low-Permeation Primer Bulb

Reliably delivers fuel to your Mercury engine.
Includes 6-foot-long, 3/8-inch diameter low-permeation fuel line.
Line is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Comes with tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6.
Multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
Kit is compatible with Ethanol blended fuels.
For use with Mercury brand engines and tanks.
Male Universal Sprayless Connector (USC) tank fitting included.

Check Stock

attwood 93806ELP7 Fuel Line Kit — for Johnson and Evinrude Engines, 6 Feet Long, 3/8-In. Diameter, with Hose Fittings

Reliable replacement for original equipment.
For Johnson and Evinrude engines and tanks.
Includes 6-foot-long, 3/8-In. diameter fuel line.
Includes two (2) 8889LP6 hose fittings for tank end and engine end.
For use with Johnson/Evinrude brand engines and tanks.
Male Universal Sprayless Connector (USC) tank fitting not included.
Female 8889LP6 hose tank fitting included.

Check Stock

Anderson Metals-07003-0808 Brass Hose Fitting Swivel Connector 1/2 Barb x 1/2 Male Pipe

Connects low-pressure hose to threaded pipe with a ball swivel for an adjustable angle.
Fitting connects to hose on one end and has an NPT male connector on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).

Check Stock

Swpeet 67Pcs Universal Bicycle Shifter Cable Housing with Bike Cable Cutter Kit, Brake Shift Cable End Caps Tube S Buckle Inside Tail Caps and O-Rings Perfect for Bike Bicycle

What You Get ------- In this kit, You will get 67Pcs Bike Bicycle Accessory Kit, Including 1Pcs Cable Cutter.
6Pcs General Front Shift Cable Wire (1.7 m).
1Pcs General Rear Brake Cable Wire (2.1 m).
2Pcs V Bike brake noodle cable guide pipe.
Heavy Duty Stainless Steel Bike Cable Cutter ----- This cable cutter made of Chrome Vanadium (CR-V) steel and has been hardened by high-frequency quenching. Works excellent in cutting up to 5/32" cable of all kinds. Meanwhile, The safety lock prevents accidental opens and cuts that might hurt you..
Black Thread tube S buckle and C-clip with V Bicycle Brake Noodles Cable ----- The cable end crimp prevents to be scratched by the cable end and keep cable ends nice and tidy, the silicone O-ring keeps your bike from the grind lacquer. These cables can be cut into suitable length for bike to meet your needs. All required end caps & cable tips. Made of rubber tube with a plastic pipe, reduce ....

Check Stock

Garden Hose Repair Kit 5/8 Inch Fittings Mender 3/4 Male and Female Water Hose End Replacement Set Connector with Zinc Clamp

⌘【Heavy Duty】: These 5/8 garden hose repair fittings can fix and secure the ends of damaged hoses for continued use in garden hose assemblies..
⌘【Leak Resistant Duty】: This garden hose mender has raised ridges (or barbs) on one end of the fitting that hold it firmly in place when it is inserted into the damaged hose, creating a leak-resistant seal..
⌘【Material】: Water hose repair kit connectors are made of brass, and the clamps are made of stainless steel..
⌘【Easy to Use】: Easy to connect and disconnect, male hose end repair can be uses to repair and connect the garden hose ends. Fit for ⅝" or ¾" hose fittings..
⌘【Package Include】: 4 sets male and female hose end repair connector with clamp, extra 8 pack garden hose washers..

Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

6AN female swivel to 3/8 barb fitting 45 Degree.
Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock

M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI

ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
If leakage, please put teflon tape on the male threads of your wand or other products..
Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock