ReviewsBrake Light Switch Connector

Blaster-X Integrated LED Tail Light for 2014-2023 Honda Grom (Smoked Lens)

...ed Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology Plug and play connectivity with OEM connectors! ***REQUIRED ACCESSORY: ELFR-1_QD Flasher Relay***. Recommended Accessory: Blaster-X Control Switch. Made in the USA! 2-year Warranty & Satisfaction.
Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation..
Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side..
Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that ....

Check Stock

SHIMANO DH-S501 Alfine Dynamo Disc Hub (32H Front, Black)

Alfine Dynamo front hub with an ultra-efficient and virtually drag-free 3.0 watt power supply for use with LP-R600 handlebar mounted light kit.
Quick-release axle for standard 100mm-OL dropouts.
CenterLock disc brake compatibility (can also be used with rim brakes).
Includes: DH-S501 dynamo hub with E2-type power connector and quick-release skewer (dynamo light/wiring kit and/or brake sold separately).

Check Stock

FUMAFI LED Light Strip Remote Controller IR Remote Control Receiver Led Light Adapter Connector Set for Receiver RGB 5050 2835 3528 Strip Lights

Notice！！ The connector can be a male connector or a female connector. Pulling out the male connector will become a female connector..
Notice！！ Adapters has positive and negative. The head arrow of the adapter should linking to the head arrow of the light strip - as shown in the picture 3..
RGB remote controller compatible used for 5050 2835 3528 LED RGB light strip..
Remote control doesn’t work. First, pull out the plastil piece before use. Then connect ir controller with led strip, it doesn’t work, disconnect the strip bar, reverse link. If the remote control still does not work, contact us to change a new one please..
If the buttons don't control the right colors. First, you can press the remote control switch button , turn off the light strip. Then press the FADE7 button（the last button below the right）, The light strip will flash. Then press the switch button to turn on the light strip, the buttons can control the correct color. If not, repeat the above steps..

Check Stock

LD DARKEAGLE 16PCS Motorcycle RGB LED Light Kits with APP/IR/RF Control, Dual Zone Motorcycle Strip Lights with Brake Turn Signal, 12V Waterproof Motorcycle Underglow Lights for Harley Golf ATV UTV

... amber. This is used to warn vehicles behind you and improve your driving safety. (Tip: Brake and Steering Functions Can Be Added or Not Added Optionally. And, when you are using this function, the remote control cannot control the light change).
【3 Control Methods & Switch Buttons】 motorcycle lights provides cell phone APP Bluetooth control and 2 easy to carry control IF + RF remote control, APP can DIY color, 29 mode selection, music mode and timing functions, etc. 2 24 keys / 4 keys RF remote control can control color change, mode change, music function. it is an easy way to control your bike lights. motorcycle strip has a convenient motorcycle handlebar switch button switch, no power failure can be turn off the lights..
【Easy to Install】 RGB LED lights has a super sticky tape on the back, which can be easily peeled off and stuck to any smooth surface. The LED strip lights can be bent to any angle and the strip can be cut to any size you want. We include six 23.62inch long extension cables to help you mount the LED strip anywhere on your motorcycle.The LED light bar is widely used on all motorcycles and cars with DC 12V power, Fit for motorcycles....

Check Stock

12PCS Brake Switch Stopper Car Brake Light Switch Automotive Clutch Pedal Stopper Stopper Brake Switch Pad 90541-06036

High Quality - Brake pedal pads are made of automotive grade plastic, With excellent mechanical strength, Good wear and corrosion resistance, Not easy....
Size - The brake light plug is approx. 1.8x1 cm / 0.71x0.4 inches, Easy to carry and store without taking up too much space..
Function - When the car brake light is always on, you need to repair it immediately to ensure driving safety, our clutch pedal limiter can solve the....
Included - You will get 12 brake light switch plugs, enough quantity for your replacement car parts needs, Suitable for most cars, trucks or other....
100% Satisfaction If you have any questions, please contact us directly, we will provide after-sales service..

Check Stock

MotoParAcc Red LED Tail Light, Universal Motorcycle Brake Taillights for Harley Dyna, Road King,Yamaha, Suzuki, Dirt Bike and ATV

【Compatibility】The brake lights fit all motorcycles with the same shape of taillight base as ours. Such as for harley sporster, XL883, XL1200,Dyna, road king, touring, ATV, Dirt Bike, Choppers, Street Bike, Cafe racer and etc..
【2-IN-1 Functions】The taillight integrated tail light and brake light. Made of high quality ABS plastic material, anti-scratch, no faded after long time exposure, water-proof, no water inside after heavy rains.
【2X Brighter Than Factory Light】Equipped with high power led chips, 2x brighter than factory light, maximize your rear end visibility, make your driving safer at night or any other extremely days..
【Easy to Install】Easy to install, no modification needed. Harness connector is attached to the end of the wire for easy installation, no wire hassle. Black wire to ground, Red wire to brake light, brown wire to tail light, and then push everything back to its’ original place..
【What You Will Get】1X Universal led taillights.You are backed by 3- Month since from order purchasing, please contact us if you have any questions. Solutions will be offered once detail is confirmed..

Check Stock

Autogem Officially Licensed RAM Hitch Cover Black

Long life LED light powered Dodge Ram tailgate emblems.
Add a stylish touch to your vehicle with Officially licensed, LED Lighted Hitch Cover For a clean look, use an extension to place the wire behind the bumper on certain models..
Light-up insignia activates when running lights are on and brightens when brake pedal is pressed (Low illumination while you’re using tail lights & High illumination when you brake or turn on the hazard lights).
Durable plastic is corrosion resistant, Fast, easy installation-Some drilling required.
Wiring harness plugs into your vehicle’s existing 4-pole trailer connector & Hitch cover slides into receiver, keeping out dirt and grime..

Check Stock

Universal Banjo Bolt Motorcycle Hydraulic Brake Pressure Light Switch (the Rear Brake Switch) for Kawasaki Honda Suzuki Yamaha BMW Ducati KTM BUELL Aprilia Benelli

Size: diameter of 10mm, thickness of 3mm, length of 400mm.
For most motorcycle, such as: Kawasaki Honda Suzuki Yamaha BMW Ducati KTM BUELL Aprilia Benelli.
Universal brake switch used on motorcycle rear set, which is connected with brake light.
Package include: 1×hydraulic rear brake switch.

Check Stock

Pccooler 120mm Fan Moonlight Series 5 in 1 Kit Upgrade,PC-5M120 ARGB LED Computer Case Fan - PWM Cooling Fan - Dual Light Loop Quiet Fan/Multiple Light Modes with Wireless Controller for PC Case

【Intelligent Speed Control】5 pcs 120mm full function PWM fans. The intelligent temperature controls the speed at 1000~1800±10% RPM, so the fan speed can be controlled and keep the fans quiet. Please connect the fan 4Pin PWM connector with 1-to-5 strip cable’s female port, do not connect it with motherboard. There’s switch fan speed control by motherboard’s PWM signal. These fans are 4pin 5v ARGB connector that connect with RGB control box one by one..
【Dual Light Loop Design – Controlled by RGB Remote Controller】Addressable RGB LEDs can be controlled by RGB remote controller – 12 lighting modes, 8 different colors and multiple RGB light speeds, provide colorful streamer lighting effects. Double-sided ring ARGB glare effect design, creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote..
【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the com....

Check Stock

FVRITO Rear Tail Light Brake Turn Signal Taillight for Gy6 49cc 50cc Tao Tao Sunny ATM-50 Roketa Sunl Jonway Baja SC50 Baccio Heat Coolsport Icebear Chinese Scooter Moped Motorcycle Motor 125cc 150cc

【Fitment】Compatible with for Gy6 4-Sttroke 49cc 50cc 125cc 150cc, Chinese scooters like TaoTao Pony 50 Sunny ATM50, Icebear,Coolsport, Roketa, Sunl, Baccio, Tank, Quinqui, Jonway, Keeways, Vento, Electra, Baja SC50, Wolf RX-50 ,Redcat, UM scooter moped..
【Features:】made of high quality ABS plastic with high transparency, anti-scratch, no faded after long time exposure, water-proof, no water inside after heavy rains, protect the bulb from water or dirt damage without weakening light..
【Easy Installation】Voltage: 12V,Power: 20W.The Rear light designed with turn signal + brake light + running light.5 pin connector（5 wires） and 2 pin connector （2 wires）. Green + orange — Left turn signals, Blue+green — Right turn signals, Yellow-green + green — Brake light, Yellow-green + brown — Running light. The internal circuit is welded firmly to extend the life of the tail lamp..
【Size】- Light Size(L x W): 290 x 107 mm / 11.42 x 4.21 inch – Top Hole Distance: 147 mm / 5.79 inch – Base Hole Distance: 105 mm / 4.13 inch – License Plate Light Size(L x W): 64.5 x 32 / 2.54 x 1.26 inch.

Check Stock

Keyecu 12 LED Tail Brake Light with 2\ Red Lense Trailer Hitch Receiver Cover for Towing Hauling Truck SUV RV 12V

★Built-in super bright red lens LED brake light provides added safety when your hitch is not in use.
★Lamp size: 3-1/4 x 3-1/4 inches to fit 2" standard tow hitch and function as tail brake light or rear fog light.
★Lamp comes with 1/4" foam lining in order to ensure that the fit is snug and secure.
★Comes with an extra long 12" wire with a flat 4-pin trailer connector and hitch pin with lock for a successful installation.
★If you wanted to add more utility lights to your truck, then this rear fog light is a great choice.

Check Stock