ReviewsBrake Line Fitting Assortment

Allstar ALL48025 Brake Proportioning Valve

  • Proportioning valves allows adjustment of front-to-rear brake bias with a simple twist of the knob.
  • Valve provides up to 57 percent reduction and has fitting ports that are 1/8 npt.
  • Valve also includes two fittings to adapt to 3/16 inch brake line.
  • Dimensions are 1 inch long x 1-3/4 inch wide and 3-5/16 inch tall.
Check Stock

KAKA Industrial Heavy-Duty Pan and Box Brake, 12-Gauge Mild Steel, High Versatility and Durability Sheet Metal Box Pan Brake (W-4812)

  • KAKA Industrial 48-Inch Sheet Metal Pan and Box Brake is designed with heavy truss rods and braces and welded steel plate..
  • High versatility can be achieved since this brake has wide assortment of finger widths, various width segment shiftable setup..
  • Both the bed and apron are bored in line to guarantee the utmost accuracy while in use..
  • The 12 gauge mild steel capacity or equivalent increases the overall value of the sheet metal pan and box brake!.
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

  • ... CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
  • 【TYPICAL APPLICATION】:The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
  • 【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F(-40°C to +93°C)(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
  • 【Quality Guarantee】: If you have any problems with it ,please feel free to....
Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

  • 100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
  • EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
  • USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
  • Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
  • 100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..
Check Stock

Bike Brake Cable Housing Kit Includes 1 Set Bicycle Brake Line 2 Pieces V Bike Brake Noodle Cable Guide Pipe and 2 Pieces Plastic Hoses for Road Mountain Bicycle Cycling Black Brake Line

  • What you receive: comes with 1 piece bicycle brake line set (includes 1 piece 5 mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, 2 pieces thread tube S buckles, 2 pieces inside tail cap, 1 piece inside O ring, 5 pieces C-clip ) and 2 pieces V bicycle brake noodles cable set (includes 2 pieces V bike brake noodle cable guide pipe and 2 pieces plastic hoses).
  • Bicycle brake line set: strong cable for more braking power and smooth operation, long length and various head to fit mountain bike, road bike.
  • V Bicycle brake noodles cable set: included 2 pieces aluminium alloy V bike brake noodle cable guide pipe and 2 plastic hoses hose, made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line, reduce brake line resistance, they are suitable for V bicycle brake repairing.
  • Durable and sturdy: this bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time.
  • Wide application: this bicycle brake cable housing kit is suitable for both mountain bikes and road bikes, contains everything you need to replace your existing ....
Check Stock

ASD Brake Line Fittings Assortment For 1/4\ Tube (7/16\ - 24 Thread, Inverted Flare) (Pack of 15-5 Short Nuts, 5 Long Nuts, 5 Unions)

  • Auto Supplies Direct 1/4" Brake or Fuel Line Fittings Assortment for Cars and Trucks.
  • Total of (15) 1/4" Tube Line Fittings- (5) 1/4" Tube Nuts, (5) 1/4" Long Tube Nuts, (5) 1/4" Unions.
  • Most common SAE inverted flare / Double flare size.
  • Compatible With 1/4" Steel, Copper, Nickel, Poly Armour, and Cupronickel Tubing.
  • High Pressure Resistant, Constructed From Safe and Professional Quality Brass, Lead Free.
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

WMYCONGCONG 80 PCS Hydraulic Zerk Grease Fitting Assortment Kit SAE Standard including Straight, 90 Degree, 45 Degree Angled Grease Fitting for Replacing Missing or Broken Zerk Fitting

  • High Quality: The grease zerks fitting are made of zinc-plated iron, galvanized iron with high strength is more durable and rust-resistance..
  • Time-Saving: The grease zerk nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, will not slippery when rotating, easy and convenient to handle..
  • Wide Application: These straight and angled grease fittings are great to replace your old or broken fittings in the hydraulic grease line, suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • Good Storage Organization: Different size of grease fitting is packaged into different grids with size label for easy identification. Durable plastic case, convenient to storage. Handy assortment in organized case, easy to carry..
  • 80 pieces SAE Grease Fittings Assortment Kit: Sizes include: Straight 1/8"-27(10pcs).
  • all common-used sizes, good value, come in handy..
Check Stock

Minimprover 12 PCS Brass Inverted Flare Brake Line Assortment (4 Unions 8 Nuts) Fitting For 3/16\ Tube (3/8\-24 Inverted Threads) Automotive Brake Line Systems

  • ★【Size & Material】: Heavy Duty Brass,strong and durable(Better Than Steel). Both the unions are 3/8-24 Inverted threads (regular 3/16 inch tube fitting size).
  • ★【Firm And Durable】: Minimprover Brass for corrosion resistance, high temperature ductility and low magnetic permeability. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)..
  • ★【Fit For】: Most common inverted flare sizes for 3/16 inch tube (3/8"-24 Inverted Threads), for use with 3/16 inch steel, poly coated, Nickel Poly Armour, Cupronickel Tubing or copper brake lines..
  • ★【Inverted Flare Nut】: These unions nuts are the best option to join two 3/16 inch brake lines together..
  • ★【Package Include】: 8 PCS Flare Brake Line Nut and 4 PCS Union for 3/16" tube. Comes with 1 year warranty..
Check Stock