ReviewsBrake Line Repair Kit

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ⛽【2 Power Supply Modes】The brake bleeder kit one person supports 2 power modes: 12V batteries & 110V/220V power outlet, which allows you to exchange brake fluid any time and anywhere - An essential auto tool for personal owner garage or repair stores.
  • ⛽【Standard & Master Modes】The brake fluid exchanger is available in Standard and Master modes. Please select either mode before starting the fluid exchange (Standard Mode Pressure: 0-2.5 bar.
Check Stock

Harley (Cerberus MC Book 21)

  • Bringing an emergency clutch & brake cable repair kit, never get stuck again. This kit contains a 1mm and a 1.5mm thick cables and most common nipple fittings(barrel, pear, trunnion, slotted, screw type, etc), making this kit universal..
  • Get one for your saddlebag, seat or even your back pocket..
  • Be prepared on the road every single time. Not just for yourself but a needing help stranded on the roadside biker dude, take out this repair kit and give him a hand..
  • universal fit for any cable operated vehicles like motorcycles, scooters, bicycles, ATV, or golf carts..
  • universal fit for most motorcycles, Brake cable: 1.5(0.06") mm dia. * 200cm. Clutch cable: 1.2(0.046") mm dia. * 200cm. 9 different sizes of clamp nipples..
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

High Powered 8KW 72V Electric Car E-Car Brushless Gearless Conversion Kit New

  • Are you tired of your electric trailer brakes not working? Here is the SOLUTION!!.
  • This kit fits on Dexter & Lippert 10,000 lb General Duty Axles commonly found on Kauffman, Big Tex, PJ, Bwise, LoadMax, and other heavy duty trailers. NOTE: Will not work with Rockwell or AL-KO axles!!.
  • The kit includes (2) left-hand & (2) right-hand hydraulic brake assemblies, (1) Hydraulic brake actuator, and (1) tandem axle brake line kit. PLEASE SPECIFY IF YOU HAVE SPRING OR TORSION AXLES OTHERWISE OUR BRAKE LINE KIT OF CHOICE WILL BE INCLUDED!.
  • Brake size is 12-1/4" x 3-3/8" with a 7-bolt mounting plate.These components have passed the CSA Standard CAN3-D313-M85 For Trailer Running Gear. ISO/TS 16949:2002 certified..
  • Brake actuator is a Genuine Dexter product part # K71-650-00. 1,000 PSI..
Check Stock

25 Ft. 3/16 OD Copper Nickel Brake Line Tubing Coil and Fitting Kit, 25 Ft of 3/16' x 25'

  • Complete Brake Line Tubing Kit- Includes 1 Pcs 25 Feet 3/16" Copper Nickel Brake Line(0.028" Wall Thickness) & 16 Fittings(10 x 3/16” (3/8-24) Inverted Tube Nuts, 2 x 3/16” (7/16-24) Inverted Tube Nuts, 2 x 3/16” (1/2-20) Inverted Tube Nuts, 2 x 3/16” (9/16-18) Inverted Tube Nuts).
  • High Quality- This brake line coil is made from Copper-Nickel alloy. It is malleable, easy to bend and not easy to break. Designed by 0.028" wall thickness and anti-rust, more flexible and durable for use..
  • Widespread Application- 3/16 brake line tubing kit for use in fuel and transmission systems. It is also widely suitable for household, industrial and commercial uses..
  • Rust and Corrosion Proof- Our copper-nickel fuel tube line last longer than standard steel tubing. It won't rust, corrosion resistance..
  • Warranty- Our brake line meets all SAE and ISO specifications. For any reason you're not completely satisfied, please feel free to contact us and ask for a replacement or refund..
Check Stock

MuHize Upgraded Brake Line Tubing Kit - 25 Ft. of 3/16 Copper Coated Flexible Tube, Roll 25 ft 3/16\ (Includes 16 Fittings)

  • PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with 16 Fittings: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • SUPER EASY BENDING & FLARING - MuHize brake lines are easy to be bent with great flexibility by hand and flare by simple tools..
  • HIGHER QUALITY - MuHize brake lines are made with unique surface treatment. The lastest copper-coated brake line is better than standard steel tubing with corrosion resistance..
  • WIDELY APPLICATION - MuHize 3/16 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..
Check Stock

Factory Spec, 3004-1215, Throttle Cable 2000-2002 fits Suzuki Quadsport 250 & King Quad 300

  • Bringing an emergency clutch & brake cable repair kit, never get stuck again. This kit contains a 1mm and a 1.5mm thick cables and most common nipple fittings(barrel, pear, trunnion, slotted, screw type, etc), making this kit universal..
  • Get one for your saddlebag, seat or even your back pocket..
  • Be prepared on the road every single time. Not just for yourself but a needing help stranded on the roadside biker dude, take out this repair kit and give him a hand..
  • universal fit for any cable operated vehicles like motorcycles, scooters, bicycles, ATV, or golf carts..
  • universal fit for most motorcycles, Brake cable: 1.5(0.06") mm dia. * 200cm. Clutch cable: 1.2(0.046") mm dia. * 200cm. 9 different sizes of clamp nipples..
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

MuHize 1/4\ Brake Line Tubing Kit -25 Ft. of 1/4 Flexible Copper Coated Brake Line Tube Roll 25 ft (Includes 16 Inverted Flare Fittings)

  • PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with 16 Fittings: ① 2 x 1/4”(7/16-24) Inverted Tube Nut.
  • ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long).
  • ③ 2 x 1/4”(9/16-18) Inverted Tube Nut.
  • ④ 2 x 1/4”(1/2-20) Inverted Tube Nut.
  • SUPER EASY BENDING & FLARING - MuHize brake lines are easy to be bent with great flexibility by hand and flare by simple tools..
  • HIGHER QUALITY - MuHize brake lines are made with unique surface treatment. The lastest copper alloy brake line is better than standard steel tubing with corrosion resistance..
  • WIDELY APPLICATION - MuHize 1/4 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of brake lines. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock