ReviewsBrake Pedal For Motorcycle

LEGO Creator Expert Harley-Davidson Fat Boy 10269 Building Kit 1,023 Pieces

  • Build a Harley-Davidson Fat Boy display model that captures the lines and engineering of the original with its teardrop fuel tank, an inbuilt....
  • Authentically designed with a Milwaukee-Eight engine with moving pistons, handlebar steering, moveable gear shift pedal and brake levers, and a sturdy....
  • Harley Davidson fans will appreciate the model's incredible level of detailing all the way down to the solid disc Lakester wheels and red-and-black....
  • The LEGO Creator Expert Harley Davidson Fat Boy is perfect for Harley Davidson and motorcycle fans ages 16+.
  • The LEGO Creator Expert Harley Davidson Fat Boy motorcycle measures over 7” (20 cm) high, 7” (18 cm) wide and 12” (33 cm) long.
Check Stock

NEW WILWOOD LONG REVERSE SWING MOUNT CLUTCH OR BRAKE PEDAL ASSEMBLY WITH ADJUSTABLE PEDAL PADS, 6 TO 1 RATIO

  • Brand New Wilwood Long Reverse Swing Mount Clutch Pedal or Brake Pedal with Adjustable Pedal Pads (Wilwood Part # 340-13574)..
  • Wilwood's new Reverse Mount Swing Pedal assembly can be used as a clutch pedal with a single outlet master cylinder or as a brake pedal with a tandem master cylinder..
  • It features all aluminum frame and forged aluminum pedal arms with ladder style construction. ..
  • Features: | Can be used: | * As a Clutch Pedal with a single outlet master cylinder | * As a Brake Pedal with a tandem master cylinder that has a horizontal mounting, when used with a Wilwood Part # 250-3677 (not included with this pedal).
  • Lightweight | * All aluminum frame and forged aluminum pedal arms with ladder-style construction | * New waffle style pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance | * Features a 6:1 pedal ratio | * Easy mounting location | * Below you can view and download the instruction booklet for this assembly here..
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • ...ed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Dorman 20716 Brake Pedal Pad Compatible with Select Toyota Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
Check Stock

Tamashi Nations - Akira - Project BM! Kaneda's Bike (Revival Version),Bandai Spirits Soul of Popinica

  • Kaneda's bike from the global anime hit AKIRA is about to explode into collections worldwide!.
  • This renewed edition comes 11 years after the first release: an incredibly accurate, heavy weight, and highly detailed portrayal of this iconic high-tech motorcycle.
  • The front suspension, which is accentuated with chrome detailing, accurately flexes.
  • pressing the accelerator pedal triggers an engine sound, while pressing the brake pedal triggers a tire-squealing effect.
  • You can even connect it to external speakers for immersive, high-quality audio playback!.
  • Only product with affixed official Bluefin label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance.
Check Stock

CKE for Toyota Camry 2018-2022, RAV4/ Avalon 2019-2022, Highlander 2020-2022, Sienna/Venza 2021-2022, for Lexus ES/LS 2018-2022 Anti-Slip Foot Pedal Cover Brake and Gas Pedal Pad - Red

  • {Applicable Models} Fit for Toyota Camry LE SE XLE XSE Hybrid Nightshade 2018 2019 2020 2021 2022.(Not fit TRD/V6）, for Toyota RAV4/ Avalon 2019 2020 2021 2022, Highlander 2020 2021 2022, Sienna/ Venza 2021 2022, for Lexus ES/ LS 2018 2019 2020 2021 2022. ( Fit Automatic Transmission only. Please comfirm the car model and the same shape pedal before purchasing. It will not fit other models,not fit sport models and other shape pedal.).
  • {Practical} increase pedal friction, filter sand and water of shoe bottom, driving more safe..
  • {Material} Made of high quality aluminum alloy and non-slip rubber, the pedal will not be deformed for a long time..
  • {Easy to Install} No drilling or welding required, just REMOVE THE FACTORY BRAKE PEDAL COVER, and put our brake pedal cover on it. The gas pedal cover don't need to remove. (Tip: Easy install and non-slip, just remember to REMOVE THE FACTORY BRAKE PEDAL COVER to add our product.) Please look at the product display picture 3..
  • {Packaging} 1x gas pedal cover, 1x brake pedal cover..
Check Stock

XKH- Motorcycle Black High Tensile Strength Aluminum Folding Rear Brake Pedal Foot Lever Compatible with CBR 600/ F4 / F4i 1999-2006 [B00Y44Q1E2]

  • Motorcycle High Quality 6061 Billet Aluminum Folding Brake Pedal New.
  • In the event of a fall, the folding end helps to prevent damage to the pedal..
Check Stock

Acouto Brake Lever Pedal for Pit Dirt Bike 50cc 110cc 125cc Rear Hydraulic Brake Lever Pedal and Spring Rear Brake Pedal Foot Lever Replacement

  • Fitment---- Brake Lever Pedal is suitable for most Chinese import Pit / Dirt bikes with hydraulic brakes. For use with hydraulic brake systems. The brake pedal lever is produced according to the original 1:1 original version, the key positions are precise and the lines are perfect.
  • Stable Performance---- High level of accuracy and sensitivity, enhance safety of your vehicle. Exquisite workmanship, stable performance and high reliability.
  • Good Replacement---- Easy and quick installation, it can be used with hydraulic brake systems. A direct replacement for the old or broken rear brake pedal foot lever, great match to your vehicle.
  • Professional Manufacturing---- Pit Bike Brake Lever Pedal is based on strict quality control, precise design, standard manufacturing, accurate size, light weight design, stable performance work and improved durability.
  • Quality Assurance---- As a professional seller, high quality products and services have always been what we stick to. Every Lever Pedal has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing.
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

Dorman 20787 Brake Pedal Pad Compatible with Select Models , Black

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock