ReviewsBrake Pedal Switch Connector

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

HQRP Foot Switch сompatible with Alesis SR-16 SR-18 Roland CR-1000 Drum Machine DP-2 Damper Sustain Pedal

  • For all electronic keyboards, synthesizers, tone modules or drum machines with 1/4" phone jack sustain-pedal input.
  • Compatible with: Alesis SR-16 SR-18 Roland CR-1000 Drum Machine DP-2 Damper Sustain Pedal.
Check Stock

Dr.Acces Golf Cart Accelerator Pedal Switch for EZGO RXV Cart OEM# 612889

  • If your golf cart cannot start after installation, you need to restart the power supply of the whole car to move it..
  • Load: Typical 3 Amps at 12-14 VDC, Max: 5 Amps at 12-14 VDC , 2 positions, 2 terminals.
  • Golf cart accelerator and brake pedal switch, is a part of accelerator pedal assembly.Replace EZGO RXV Part number: 612889, 609697，Also replace OEM 607605, 430-003, 612889, 575621101, 605538, AM143287, K7621-62251.
  • Check The Diagram To Kindly ensure you purchase the correct part, Our parts meet or exceed OEM quality,Easy Installation & 1 year Warranty. Return or Refund freely..
Check Stock

Dorman 20716 Brake Pedal Pad Compatible with Select Toyota Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
Check Stock

FZONE Compact Sustain Pedal for Keyboards Digital Pianos Synthesizers,Tone Modules,Drum Machines All Metal Heavy Design,Non-Slip,with Polarity Switch

  • 003cp003e【Connector: 1/4 inch】FZONE sustain pedal For all digital piano,electronic keyboards, synthesizers, tone modules or drum machines with 1/4" jack sustain-pedal input.003c/p003e.
  • 003cp003e【All Metal Housing Heavy Design】All-metal body better stability and durability，Different from others pedal,FZONE compact pedal Sturdy structure support years of use.003c/p003e.
  • 003cp003e【Polarity Switch Style】Polarity switch provides compatible with ALL BRANDS keyboard piano with 1/4" jacks.003c/p003e.
  • 003cp003e【NON-SLIP】The large rubber anti-slip design gives the pedal a stronger grip on the hard flooring and blankets.003c/p003e.
  • 003cp003e【365-day Warranty】Because the quality of the product is so great, we are confident that offer a 365-day warranty, replacement only, no questions asked!003c/p003e.
Check Stock

CKE for Toyota Camry 2018-2022, RAV4/ Avalon 2019-2022, Highlander 2020-2022, Sienna/Venza 2021-2022, for Lexus ES/LS 2018-2022 Anti-Slip Foot Pedal Cover Brake and Gas Pedal Pad - Red

  • {Applicable Models} Fit for Toyota Camry LE SE XLE XSE Hybrid Nightshade 2018 2019 2020 2021 2022.(Not fit TRD/V6）, for Toyota RAV4/ Avalon 2019 2020 2021 2022, Highlander 2020 2021 2022, Sienna/ Venza 2021 2022, for Lexus ES/ LS 2018 2019 2020 2021 2022. ( Fit Automatic Transmission only. Please comfirm the car model and the same shape pedal before purchasing. It will not fit other models,not fit sport models and other shape pedal.).
  • {Practical} increase pedal friction, filter sand and water of shoe bottom, driving more safe..
  • {Material} Made of high quality aluminum alloy and non-slip rubber, the pedal will not be deformed for a long time..
  • {Easy to Install} No drilling or welding required, just REMOVE THE FACTORY BRAKE PEDAL COVER, and put our brake pedal cover on it. The gas pedal cover don't need to remove. (Tip: Easy install and non-slip, just remember to REMOVE THE FACTORY BRAKE PEDAL COVER to add our product.) Please look at the product display picture 3..
  • {Packaging} 1x gas pedal cover, 1x brake pedal cover..
Check Stock

Dorman 20787 Brake Pedal Pad Compatible with Select Models , Black

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Acouto Brake Lever Pedal for Pit Dirt Bike 50cc 110cc 125cc Rear Hydraulic Brake Lever Pedal and Spring Rear Brake Pedal Foot Lever Replacement

  • Fitment---- Brake Lever Pedal is suitable for most Chinese import Pit / Dirt bikes with hydraulic brakes. For use with hydraulic brake systems. The brake pedal lever is produced according to the original 1:1 original version, the key positions are precise and the lines are perfect.
  • Stable Performance---- High level of accuracy and sensitivity, enhance safety of your vehicle. Exquisite workmanship, stable performance and high reliability.
  • Good Replacement---- Easy and quick installation, it can be used with hydraulic brake systems. A direct replacement for the old or broken rear brake pedal foot lever, great match to your vehicle.
  • Professional Manufacturing---- Pit Bike Brake Lever Pedal is based on strict quality control, precise design, standard manufacturing, accurate size, light weight design, stable performance work and improved durability.
  • Quality Assurance---- As a professional seller, high quality products and services have always been what we stick to. Every Lever Pedal has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing.
Check Stock

Dorman 20744 Brake Pedal Pad Compatible with Select Acura / Honda Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20753 Brake Pedal Pad Compatible with Select Ford / Lincoln / Mercury Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20729 Brake And Clutch Pedal Pad Compatible with Select Ford Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock