ReviewsBrake Piston Resetting Tool Kit

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
*Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....

Check Stock

LAJIAOZ Stainless Steel Car Brake Caliper Press Tool,Compressor Brake Wrench Can 360 Degree Ratchet Swing for Car Brake Repair and Replace

★Function:this car brake caliper press tool has a wide range of uses,suitable for most automotive,it is also suitable for single piston and double piston floating calipers, please check your brake caliper size first before purchasing..
★Design:the piston spreader tool is designed to 360 degrees swing , so the spreader can be placed any position and the tool can be used from any direction, thickened and reinforced pad and comfortable handle.
★Material:the ratchet brake pad spreader is made of stainless steel,high strength and durable and the handle is made of rubber, which is very comfortable to grasp.
★Size:The brake caliper press tool total length is about 10.7''/271mm, the retraction supports about 1.3''/33mm, and the spread supports about 2.52 ''/64mm,see the picture for detai.
★We are specialized in producing various tools, please go find all kinds of tools fittings you need in LAJIAOZ store .Customer satisfaction is our top priority,if there anything missed or broken,pls let us know,we'll reply within 24 hours.

Check Stock

OMT 24pcs Brake Caliper Tool Heavy Duty Brake Caliper Compression Tool Caliper Piston Tool for Brake Pad Replacement Reset with Thrust Bolt Assemblies Retaining Plates 18 Disc Adapters

UNIVERSAL COMPATIBILITY: This 24-piece brake caliper tool set by Orion Motor Tech includes 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters to fit hundreds of domestic and import vehicle makes and models and give you everything you need to service your brake pads.
EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle, then simply turn to rotate the pistons back into their calipers to clear your pads.
embedded magnets in each thrust bolt assembly easily hold your drive keys and adapters in place during use.
HEAVY-DUTY MATERIAL: This set of brake caliper compression tool is crafted from structural-grade 45# steel with industry-leading technology to offer superior strength and durability.
the protective sandblasted surface further enhances its wear and corrosion resistance.
CONVENIENT STORAGE: The blow-molded ABS case of this brake piston compressor tool kit comes with pre-sized and labeled slots for easy organization, storage, and transport between jobs.
SATISFACTION GUARANTEED: This disc brake caliper tool set is backed with its strong warranty and Orion Motor Tech's usual friendly 24/7 customer service, ensuring that you'll be able to use this kit for years to come!.

Check Stock

CNWOOAIVE Disc Brake Pad Spreader Tool Caliper Piston Pusher Tool Inner Brake Pad Pistons Compressor

【Material】: Made of high carbon steel and chrome vanadium steel, it has corrosion resistance and higher durability..
【Design】: With a large and powerful handle, it can provide maximum torque and non-slip handle to increase comfort..
【Easy to Use】: Replace the brake pads faster by compressing the internal brake pad and resetting the piston. Tighten the built-in knob by hand to provide a comfortable grip.
you can also use a socket wrench with a 5/16" socket adapter..
【Wide Applications】: Designed to be used on European imported and American domestic vehicles alike, light trucks and domestic cars..
【110% Guarantee Customer Service】: If you have any quality issues with your Disc Brake Pad Spreader, please feel free to contact customer service for troubleshooting help, replacement, or refund..

Check Stock

Motormite 21151 Drum Brake Bar

13pcs Kits Rotates Piston Back Into Caliper Replacement forting Of New Brake Shoes And Pads.
This Tool Kit Allows You to Rewind the Pistons In Brake Calipers By Hand, Without Damaging the Gaskets in the Pistons and Seals.
Precisely Made Adaptor Plates with Thrust Bolt Assembly and Reaction Plate.
Includes Left And Right Handed Thrust Bolt And 12 pcs Adapters Replacement for Using In Most Domestic And Imported 2/4WD Vehicle.
Come With Blow Molded Carrying Case Replacement for Convenient Storage And Carrying.

Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

...Sturdy Material】: Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, not easy to deform, durable for long time use. Ergonomically designed reinforced handle, efficient, Comfortable & non-slip. Perfect Father's Day Gift.
✔【Universal Disc Brake Caliper Pistion Tool】: Brake piston caliper is equipped with 2 large push plates and 2 brake caliper hooks. The larger plate is fixed in place by built-in powerful magnets and cylindrical pins for easy and quick installation and removal. The hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair..
✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most larg....

Check Stock

ABN Caliper Piston Compressor Tool 16-pc Pneumatic Brake Caliper Tool Air Brake Tools Brake Caliper Compressor Tool

MAKE BRAKE JOBS EASY: Use the ABN Brake Compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4-inch air hose adapter to simplify brake jobs.
Choose an adapter, connect your existing shop air line, press pressure button and rotating lever to wind back brake piston, press release button, and pull rotating lever to move push piston axle backwards for dismounting tool caliper.
FITS YOUR VEHICLE: Drive key adapters for GM, Citroen XM & Zantia, Citroen CXM, Citroen C5, Alfa Romeo, Alfa Romeo 164 2.0 Saab 9000, Audi, Audi 80/90 & V8, BMW, Ford, Honda, Honda Prelude Isuzu, Jaguar, Jaguar XI40, Mercedes, Mitsubishi, Nissan, Nissan Bluebird, Nissan Silvia, Nissan Maxima Rover, Toyota, Toyota Celica & Corolla GR & MR2, Volkswagen (VW), VW Golf/Pas-Sat Corrado/GTX 16V/Scirroco, Volvo, Mazda 323.626, Primera 2.0L VW Golf IV, Rover 800, Subaru L & 2 Series, Opel, Ford Mondeo.
BUILT TO LAST: Pneumatic body constructed from solid heat-treated cast anodized aluminum.
Moving parts constructed from chrome alloy steel (chrome finished rotating lever, phosphate finished holder, and anodized aluminum handle).
Each adapter is permanently etched with size for quick i....

Check Stock

THOROAD Brake Caliper Press Tool, Brake Caliper Compression Tool,Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates (Red)

【】THOROAD Brake Caliper Press Tool uses high quality spreading plates with 1/8" thickness steel,corrosion resistance, economical and practical, with long service life. The ratchet brake piston is equipped with 2 additional steel plates. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor..
【】THOROAD Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly..
【】THOROAD brake caliper compression tool ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.Suits for disc brake, NOT for drum brake..

Check Stock

ATPEAM 24PCS Disc Brake Caliper Tool Set Wind Back Tool Kit for Brake Pad Replacement Reset

Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
2 x Handed Thrust Bolt Assemblies (Left & Right).
Blue Blow Mold Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

...rface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, and the middle push rod is made of 304 stainless steel, and sliver phosphate coating for excellent durability and corrosion resistance for long-lasting use. Choose the best brake adjustment tool for your car and give yourself and your family the best protection.
Professional Brake Booster Adjustment Tool- Using a professional brake a....

Check Stock

ATPEAM 24pcs Heavy Duty Disc Brake Caliper Tool Set and Wind Back Kit for Brake Pad Replacement

Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
2 x Handed Thrust Bolt Assemblies (Left & Right).
Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
Black Storage Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock