ReviewsBrake System Vacuum Pump

Silver Stainless Steel Brake Caliper/Master Cylinder/Clutch Slave Cylinder Bleed/Banjo Valve Kit for Brembo on Ducati/Aprilia/Moto Guzzi/KTM

  • Replaces Manufacturer Part Number:1911113 / 1910790 / 1910301.
  • Compatible with: Sportsman 335 1999-2000.
  • The mounting hole is 6.5MM, and the center distance of the mounting hole is 38MM..
  • The live cylinder diameter of the brake pump is 12.7MM, and the oil pipe screw is 10MM..
  • When installing, you must loosen the oil drain screw of the pump under the brake, and continuously press the brake foot brake pump to generate pressure, so that the oil of the brake pump passes through the oil pipe, enters the brake pump, discharges the air, and then tightens the oil drain screw. The brake system does not work without exhausting air.
Check Stock

ATP 2 in 1 Brake Fluid Bleeder Oil Change Hand Held Vacuum Pistol Pump Tester Kit

  • Includes pump w/ vac gauge, two 2 ft. tubes, vacuum & brake bleeder adapters, brake fluid reservoir.
Check Stock

Brake Bleeder Kit Hand Vacuum Pump Brake Fluid Bleeder Kit with Pressure Gauge Brake Bleeder Adapters Reservoir Hoses for Brake Fluid Power Steering Handdeld Vacuum Pump Brake System Bleeding Tools

  • UNIVERSAL BLEEDING KIT: Orion Motor Tech's vacuum bleeder with an adapter set works with nearly any vehicle's system and lets you bleed your brakes,....
  • SUPERIOR DURABILITY: The easy-to-use brake bleeder pump is constructed from high-grade aluminum alloy for lightweight long-term use and is anodized....
  • HERMETIC SEALING: Our tubes are made from premium silicone for better resilience, heat resistance, and sealing performance than the competition.
  • WIDE APPLICATION: Not just for bleeding brakes, this brake bleeding kit also clears oil, power steering fluid, and other hydraulic systems.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this brake fluid bleeder kit with strong 1 year warranty and our usual friendly 24/7 customer service,....
Check Stock

YSTOOL Hand Held Vacuum and Pressure Pump Brake Clutch Fluid Bleeder Tool Kit Oil Change Power Steering Fluid Bleeding Set with Pressure Gauge Jar Adapters for Auto Car Truck Motorcycle Use

  • YSTOOL multi-functional vacuum pressure pump kit can be widely used to test a variety of essential vehicle settings and operations, such as....
  • The included 3 differently sized black L type and 9 straight cone rubber adapters, can connect with the brake bleeder valve on any vehicles that use....
  • The hand pump adopts aluminium cylinder with a -20 to 0inHg vacuum & 0 to 40psi pressure gauge. Move the collar on the cylinder forward and pump for....
  • In the hand held vacuum pump tester set, there are two 120ml / 4.5oz storage jar, which have liquid storage cover and liquid transfer cover with....
  • If after pumping several times and you can not pump any more, but the index keeps on certain readings without dropping, maybe it is because of a....
Check Stock

Power Steering EVAC Kit Power Steering and Brake Bleed Adapter Kit Work with Hand Vacuum Pump

  • REMOVE AIR FROM AUTO FLUIDS: Help to eliminate trapped air following repairs or fluid changes.
  • ADAPTERS FOR BRAKE SYSTEMS: Includes large tapered stopper, small tapered stopper, graduated catch can, two lids, four tubings, and three Brake....
  • EASY TO USE: Works with a hand vacuum pump that can be coupled to the adapter to exert a vacuum on the fluid’s surface in the reservoir.
  • MULTIPURPOSE: Can be used on clutch reservoirs and brakes.
Check Stock

DASBET Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive

  • 003e003e【APPLICABLE】Providing 2 in 1 automotive solution: Brake bleeder & Vacuum pump tester. The vacuum pump is multi-functional, can be used to test essential vehicle settings and work as vacuum bleeder for brakes..
  • 003e003e【FEATURE】Cushioned pistol grip handle Equipped with vacuum gauge, simple operation.
  • 003e003e【FEATURE】Good sealing performance, convenient installation, exquisite design and simple operation..
  • 003e003e【MATERIAL】Made of high quality material, alloy steel, plastics and rubber for durability..
  • 003e003e【EASY STORAGE】Comes in a blow molded case for safe & easy transport and storage. NOTE:The Blow-molded case upgraded since Feb.,2019, all contents inside keeps same.All products are 100% brand new. If you think the item you received is used, please contact us for a replacement..
Check Stock

OTC Water Pump Holding Tool

  • ...nium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other damage..
  • A water tank pressure leak tester and vacuum purge fill tool kit is very helpful on troubleshooting, save money and time. If there is a small leak in cooling system, or if you add coolant without vacuum, can cause many problems or even a damaged engine, this kit is much cheaper than the maintenance cost or a new engine. And normally, the tools take about 10 minutes to test leak and 5-10 minutes to refill coolant. Simple operation and save time..
  • Thermometer uses stainless steel material, with scale range ....
Check Stock

Appion SPDKIT-V - MegaFlow Vacuum Speed Kit

  • MegaFlow Vacuum Speed Kit - Works with 1/4in and 5/16in System Connections.
  • Works with 1/4in and 5/16in System Connections.
  • Maximize the Flow of ANY Vacuum Pump - Works on all vacuum pump with 3/8in MFL and 1/2in MFL fittings.
  • Up to 16x Greater Flow when compared to evacuation with a manifold.
  • Fast and Simple - Simple setup, Fast evacuation, Reduced job times.
Check Stock

Acouto Hand Held Vacuum Pump Tester, Motorcycle Motorbike Trucks Car Hand Held Brake & Clutch Bleeder Vacuum Pump Tester Set Bleed Kit

  • ✔Selected high quality material with high-strength, is sturdy, durable and easy to operate..
  • ✔Copper material barrel is durable and wearable, with good toughness and airtightness. Easy to read the data. Fine polished anti-rust surface treatment with anti-slip rubber sleeve, is wear-resistant, beautiful and comfortable to grip..
  • ✔Rich configuration in the joints, and the pressure gauge accurately measures the vacuum pressure..
  • ✔It can be operated by one person. The joint is suitable for a variety of automotive brake systems. The hand operated pump pulls the fluid through the bleed nipple, no need to use the brake lever or pedal..
  • ✔Suitable for testing vacuum-driven components in automobiles and trucks, including distribution board advance mechanisms, heating and plates, PCV, the headlights cover door and the exchange regulator, release the brake fluid pumping unit, and the car/motorcycle brake oil replacement..
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • FUNCTION: This coolant vacuum refill kit performs vacuum pressure test and coolant vacuum fill services. Use an extra vacuum pump to work with this airlift coolant refill tool to form a vacuum in the cooling system, then draws coolant into the radiator. Quickly refill the system with no air pockets or hotspots produced, avoid warping or other damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help rad....
Check Stock