ReviewsBrass Air Solenoid Valve

Electric Solenoid Air Valve G1/8 Vacuum Solenoid Valve Sealing Reduce Wear Resistamt Copper Coil for Industrial Use

  • COPPER FULL TURN COIL: Solenoid valve for a time use is not easy to hot, possess durable life, more durable than ordinary solenoid valve.
  • WEAR RESISTANT: Between solenoid valve internal moving parts has excellent softening oil, effectively reduce wear between parts.
  • RELIABLE SEALING: Solenoid valve using excellent sealing , to ensure that the product performance is stable and reliable, lasting.
  • WIDE APPLICATION: Used for rail transport, vehicle manufacturing, ship engineering, mechanochemistry, mining equipment, biomedicine.
  • AVIATION CAST ALUMINUM VALVE BODY: Die cast aluminum valve body with solid material, the is finely polished, the inner wall is also polished several times, to ensure that the interface is without burr and no air leakage.
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully open.
  • Ideal for projects where an automatic return is necessary.
  • 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
  • Returns to fully closed if power is removed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Hornblasters Katrina 5 Chime Black Train Horn

  • Quality Metal Design - This horn was designed with durability in mind. This horn was made to survive in the toughest climates. Rain, sleet, or snow, the Katrina has got your back..
  • Manifold Design - All five trumpets sit on a specially designed manifold. This manifold routes the air from the inlet to all 5 bells. This horn takes up a decent amount of space however it is very easy to install..
  • Pre-installed Solenoid Valve - This horn features a pre-installed 3/8" solenoid valve with a 1/2" inlet. This horn is ready to accept 1/2" air line directly out of the box. Simply wire one lead of your solenoid to positive, and ground the other lead..
  • 1/2" Air line - The Katrina sounds best when matched with 1/2" air line. We include 10' of 1/2" air line with each Katrina horn. Running 1/2" line with this horn ensures a great honk every time..
Check Stock

ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output

  • ...remove the air tube, convenient for your use.
  • 【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make you away from the danger of solenoid valve leakage, protect your safety.
  • 【Refine The Bubbles】Our CO2 aquarium kit is equipped with an atomizer, which can purify bubbles, make them easily soluble in water and absorbed by plants, and make your aquarium full of vitality. We also gave you an extra atomizer as a replacement to extend the service life of the product. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • 【What's in The Box?】 The box you receive will come with a cylinder, stainless steel pressure-reducing valve, filter, bubble counter, solenoid valve, solenoid valve power supply, solenoid valve connection cable, spare sealing ring, spare atomizer piece, 4 snap-on suction cups, one-way valve, stainless steel U-tube, 2 stainless steel atomiz....
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Fankerba Normally Open Pressure Solenoid Water Valve for Water Air - DC 12V 1/2 / Pure Copper Coils

  • This is pressure solenoid valve:it is suitable for tap water supply..
  • This is normally open solenoid valve:water will be supplied without electricity, and the solenoid valve will not work after power is turned on..
  • It is 67.7mm/2.67 inch length between the two joints.
  • it is 69mm/2.7 inch height between the up and down..
  • The valve body is plastic and the joint is copper.
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • ...eel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply, Solenoid valve connecting line, Spare sealing ring, Spare at....
Check Stock

A/C Compressor Control Solenoid Valve Replacement for 2013 2014 2015 2016 2017 Nissan ALTIMA 2.5 L SL SV

  • FITMENT - A/C control solenoid valve Replacement for 2013-2017 Nissan Altima.
  • A/C Compressor Control Valve made of high quality material, has experienced quality tested to ensure easy installation, optimal performance and durability enhancement..
  • Please verify the control valve on your factory compressor looks like the part pictured. Please note that these AC kits will only fit the vehicles original OEM AC compressors and will not fit an aftermarket compressors.
  • When the compressor solenoid valve doesn't blow cold. You should consider that whether there is a failure on your compressor solenoid valve. Replace the control valve on your with our replacement valve and your air conditioning will be good.
  • Service-If you have any problem or issues, please without any hesitation to contact our after-sale service via email, we will do our best to help you.
Check Stock

mistcooling 30'' OSC Misting Fan Kit - Mid Pressure (1 Fan)

  • Base Fan Mist Kit Includes: 1 - 30'' High velocity 3 Speed Oscillating Fan with 6 Nozzle Mist Hub 1- 250PSI Mid Pressure Pump with Solenoid and Filtration 1- 25ft Roll of Flexible Tubing 1/4'' 6- Ultrafine Brass/Stainless Steel Misting Nozzles – Mounting Clamps and All necessary fittings for easy DIY installation..
  • - PUMP Features: - Whisper quiet operation.
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 5 Fans (With 6 Nozzles each) FAN Features: - UL 507 certified for outdoor use - High Velocity, 3 Speed, Oscillating Fan (Air throw up to 45 feet) - Corrosion resistant finish - 10ft pre-wired 3-prong plug for 120V AC - 7100 CFM, 1/4 HP, 2.6 Amps - Quiet operation - Totally enclosed, maintenance free high performance motor with thermal overload protection - Patented 6 Nozzle Mist Hub.
Check Stock

ECCPP New Vapor Canister Vent Solenoid Fuel Vacuum Valve Fit for 2000-2001 Volkswagen Golf 1.8L 2004-2009 Audi A3 Quattro 3.2L 2004-2008 Audi S4 4.2L 911-800

  • FITMENT: Fit for 2004-2009 Audi A3 Quattro 3.2L, 2001-2005 Audi A4 Quattro 1.8L, 2004-2009 Audi TT Quattro 3.2L, 2004-2007 Volkswagen Touareg 3.2L, 2005-2010 Audi A8 Quattro 6.0L. The more details as description.
  • USABILITY: Designed to control the injection time and quantity of fuel vapor into combustion chamber which can reduce air pollution caused by fuel evaporation emission on automobiles and motorcycles and increase fuel efficiency at the same timeq.
  • TROUBLESHOOTING :When the solenoid valve of the carbon tank is electrified and the solenoid valve does not move, the “click” sound of the solenoid valve suction is heard.
  • when the solenoid valve is electrified, the blowing test is carried out, and no matter the way between the carbon tank and the intake manifold is open. You must replace a solenoid.
  • PACKAGE INCLUDING: 1PC Canister Purge Solenoid. Part Number: 911-800, 1C0906517A, 2283748, 2M1274.
  • TIPS: Any question or problem about fitment information, feel free to contact us for more details.And check the fitment by the Amazon Garage in the top left before purchasing.
Check Stock