ReviewsBrass Brazing

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

  • Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
  • Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
  • Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
  • Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
  • Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check Stock

(3 PACK) SÜA Welding Nozzle Replacement for 300 Series Victor torch handles. Sizes: 00, 0 and 1

  • READ THIS BEFORE YOU BUY:***These tips are compatible ONLY with Victor 300 Series Welding Torch Handles - These Tips WILL NOT FIT Victor Series "100" or Series "J" Handles***.
  • READ THIS BEFORE YOU BUY: ***Check the picture Nº2 with the thread size and compare with your torch handle - If the thread size in Picture Nº2 does not match your Victor torch handle thread, Please search on Amazon the following ASIN Codes: B07CFX7FS5 and B0856TS3QQ (Smaller Tips).
  • Welding / Brazing Tip with Mixer Replacement for "300" Series Victor torch handles - Gases: Oxygen/Acetylene and Oxygen/Hydrogen.
  • This is a General Purpose Welding and Brazing Tip manufactured in high-quality copper and brass. - Please Check Tip Chart Picture for Sizes, Welding Capacity, and other operational parameters..
  • Choose the Tip Size and Package Quantity from the "Size" Menu Options..
Check Stock

Oxy-Acetylene Welding Tip Series W-J Compatible with “J” Series Victor Ligth Duty Torches - Sizes #1, 2 and #3 (3-Pack)

  • READ THIS BEFORE YOU BUY:***These tips are compatible ONLY with Victor "J" Series Welding Handles - These Tips WILL NOT FIT Victor Series "100" or "300" Handles***.
  • READ THIS BEFORE YOU BUY: ***Check the picture Nº2 with the thread size and compare with your torch handle - These tips are ONLY compatible with "J" Series Light Duty Victor Welding Handles***.
  • Welding / Brazing Tip with Mixer Replacement for "J" Series Victor torch handles - Gases: Oxygen/Acetylene and Oxygen/Hydrogen.
  • This is a General Purpose Welding and Brazing Tip manufactured in high-quality copper and brass. - Please Check Tip Chart Picture for Sizes, Welding Capacity, and other operational parameters..
  • Choose the Tip Size and Package Quantity from the Available Options..
Check Stock

WeldingCity Medium Duty 1-piece Type Victor Style Acetylene Welding Brazing Nozzle 0-W-1 (Size 0) with W-1 Mixer for 100 Series Torch Handles

  • Premium Victor style acetylene gas welding/preheating/brazing nozzle W-1 series one-piece type for 100 series torch handles (not for J-100 series)..
  • Double O-ring sealed spiral mixer (W-1 type) blends oxy-acetylene gas. 65° elbow angle. Brass coupling nut with built-in snap ring..
  • Medium duty welding/preheating/brazing for use with oxygen-acetylene gas. Work with Victor light to medium duty 100 series (not J-100) torch handles such as 100C/100FC/WH26/WH260 and other aftermarkets versions..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5, 6 and 7. Pack of 1 welding nozzle..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

Propane Torch ,Mapp Torch Head,MAPP/MAP/PROPANE Gas Torch(Stainless Head)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

Bernzomatic PC3 Copper-Phosphorous Brazing/Welding Rods, 3-Piece

  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs.
  • Working temp: 1,310-1,475-Degree farenheit.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze).
Check Stock

Brass Brazing Round Rods TIG Welding Wire 0.8mm 1.0mm 1.2mm 1.6mm 2mm 2.5mm 3mm 4mm 5mm 6mm, to Use with Copperflux Powder

  • Compostion: (1)Cu 59% to 61% (2)Sn 0.8% to 1.2% (3)Si 0.15% to 0.35% (4)Zn balance.
Check Stock

Miller Electric Gas Welding Outfit,Propane,CC509P,WH100 (MB54A-510LP)

  • This gas welding cutting torch kit is good tool for metalworker doing cutting, welding, heating work..
  • This oxygen & acetylene cutting torch kit are mainly made of heavy duty metal and brass, with high strength, durability features..
  • The cutting torch and handle is constructed with high strength alloy,heavy duty stainless steel and durable brass..
  • The cutting torch and welding kit is great tools for many occasions, such as welding,soldering,brazing,rivet cutting,hard-facing and metal heating process..
  • You will get Cutting Nozzle & Attachment, Cutting Torch, Torch Handle, Tip Cleaner, Spark Lighter, Welding Goggles, Spanner, Copper Joint and English Manual in one storage box..
Check Stock

Propane Torch ,BBQ Torch ,MAPP/MAP/PROPANE Gas Torch,Soldering Torch (Basic simple payment)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

Propane Torch with Hose 3.6FT, Mapp Gas Torch Self Ignition Trigger, Welding Gas Torch for Brazing, Soldering, HAVC, Jewelry, Heating, Plumbing

  • GAS CYLINDER USE-Portable propane torch with a push button igniter, can be used with propane, mapp gas or map-pro..
  • LARGE DIAMETER BRAZING-Propane torch comes with high intensity swirl flame puts out Maximum focused heat for large diameter brazing, soft solding,HAVC,jewelry and freezing pipes project..
  • 3.6 FT HOSE INCLUDED-3.6' long hose and ergonomic handle design, provide more working flexibility and comfortable grip. The propane torch can be used with cylinder clamps and secure the gas cylinder at any convenient places, just take the mapp gas torch and work around..
  • EASY TO USE-Adjustable flame size control knob, you can switch the flame modes for different job needs by adjust the air input amount..
  • REAL DURABGLE-Propane torch main body are constructed with Full Brass for ouput and wear resistant.This hose torch is designed as self-ignition.Hassle-free to use for professionals and home owners..
Check Stock