Frankford Arsenal Case Trim and Prep Center European 240V with Hardened Steel Chamfer Deburr Tool and Primer Pocket Scrapers for Reloading (European Plugs only)
SPECS: The HSS cutters stay sharp for thousands of rounds to make trimming quick and easy and the heavy-duty motor and drivetrain are optimized for durability and performance, 240 volt model is compatible with European electrical outlets.
INCLUDES: Inside chamfer tool, deburr tool, large and small primer pocket cleaning tools, and a trimmer with 3 collets and 6 shoulder bushings.
VERSATILE: Adjustable Collet System works with all shouldered cases from .17 Remington to .460 Weatherby.
EASE OF USE: An innovative case holder with adjustable collet and bushing system indexes the case shoulder and can be set to precisely trim brass to the exact desired length.
BE PREPARED: Built-in storage box holds extra tools and keeps everything ready and organized.
Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube
This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Grizzly Industrial T28780 - Router Table with Lift
Complete Control: This powerful soft start 3.25 horsepower motor with easy to adjust variable speed dial ensures you have complete control while....
Powerful performance: Electronic speed control of the motor provides the power to maintain constant speed under load and ensure perfect results when....
Smooth routing: 15 AMP motor offers 10,000 to 22,000 RPM for smooth routing every time.
Industrial Grade: Included with the motor are two precision ER20 collets (1/4" and 1/2") for secure, accurate routing. These collets have holding....
A great addition to the workshop: With a 4.2-inch diameter, this motor is easy to use and compatible with most router lifts and tables.
[Increase Engine RPM]: Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
The Exhaust Hanger Tool easily expands pipes with ease,.
[Professional tools] The pipe stretcher kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
Perfect for home DIY or professional auto shops..
[Easy to Use]: Simply lubricate all parts of the exhaust expander tool, attach sleeves as needed, insert pipe spreader into the pipe, connect to existing drill, and expand away.
Pipe might need to be warmed during winter months to prevent damage while using tube expander. Use a 1/2" or 3/4" impact wrench to save even more effort..
[Wide Application ]: Tailpipe expander kit great for all types of pipes, from aluminum to stainless steel.
The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4"..
Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Bearing Removal Tool Set 16 Pieces
16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set 16PCS
1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
LainKeen Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4", Exhaust Pipe Expander Stretcher Tool Set, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube
This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
Manual hydraulic pump can be used with split hydraulic....
WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62
12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..