ReviewsBrass Copper Threaded Fitting

MroMax Brass Compression Tube Fitting-8mm /0.31\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

【Product Size】Inner Diameter (I.D.): 8mm / 0.31".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

RAINPAL RBS022 LF Brass Rain Barrel Spigot(3/4" Quarter Turn Ball Valve w/Bulkhead Fitting, Thread Tape and Cord) (2 Pack)

Rust Proof Design: with Brass Body and Stainless Steel Handle..
Leak Proof Design: Thick and Strong Gasket in Groove, Make a watertight seal..
Free Proof Design: Thick Brass Body withstand Expansion when Freezing.
Lead Free Compliant Brass, Suitable for Potable Water.
Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.

Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
Ideal for application with a wide variety of fluids and gases including potable water applications.
Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.

Check Stock

VOLT All-Star 12V Cast Brass Outdoor Mini Spotlight with LED Bulb (Bronze)

UL/cUL LISTED - VOLT products are UL Listed for safety.
most competitors' landscape lighting products on Amazon are not..
SOLID BRASS CONSTRUCTION - No powder coating or paint to wear off or peel.
just a durable natural bronze finish that does not corrode..
PROFESSIONAL GRADE - Fully adjustable glare guard. Beryllium copper socket, which is more corrosion resistant than copper. Socket and machine thread body are pre-greased for smooth operation and moisture protection. Includes 4-foot 18-gauge premium tinned copper lead wire and PVC ground stake..
MOISTURE TIGHT - Machine threaded body screws tight onto an O-ring for moisture tightness. Silicone plug at the lead wire exit prevents ground moisture from entering..
LIFETIME WARRANTY – VOLT Lighting extends an industry-best lifetime warranty on its brass fixtures and LED bulbs. Using state-of-the-art components, our professional grade products are built to the highest standards of construction and performance, and are field tested for durability and ease of installation..

Check Stock

Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black

15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing.
Repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper.
can be drilled, tapped, threaded, filed, sanded and painted once cured.
resists most automotive, shop and cleaning fluids.
Temperature Range: up to 300°F intermittent.
Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings.

Check Stock

Jeemitery 24 Feet Fiberglass Fish Tape Cable Rods, Electrical Wire Running Pull/Push Kit | Fishing Feeder Pole Sticks Snake Tool for Coaxial Wall Wiring

...ass hook end for pulling, 1 brass eye end for pulling, 1 magnetic end for fishing, 1 rounded brass end for pushing,1 Cable Pulling extension cord parts fitting.
SPECS: 19 rods, length: 240-Inches , diameter: 3/16” - Flexible acrylic add-on: 6-1/2” – Male/Female brass threaded connectors: 4mm - Kit contains hook & eye ends, and a plastic storage case..
QUALITY: The stiff feeder poles are made of high quality nonconductive sturdy fiber glass with solid brass connectors & eye/hook ends, and a bendable acrylic extension..
DESIGN: Highly visible yellow shafts simply screw together with special threaded ends extending the tool up to 24Ft., with an acrylic bar that flexes to any angle and a hook and eye attachment making pulling and pushing cables a breeze..
USES: The joints are useful for electricians, builders, crafters, engineers, DIY’s when fishing electric, coaxial, CCTV, alarm, network, circuit, phone, audio speaker lines, video, HDMI, internet CAT5e, & CAT6 cables through thin exterior or interior drywalls, vents, suspended garage ceilings, attics, straight cond....

Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

SharkBite UC256LFA10 3/4

ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Check Stock

Renator P72-02330G Brass Spigot for Rain Barrel. Lead-Free Compliant, 3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting, Thread Tape, and Polyester Wire

A QUALITY SPIGOT FOR YOUR RAIN BARREL. Make use of the water collected from your rain barrel easily. This spigot is designed to provide a strong water flow by relying on pressure from the water in your rain barrel. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
HEAVY-DUTY, DURABLE CONSTRUCTION. From using a brass ball valve and body and aluminu....

Check Stock

uxcell Brass Compression Tube Fitting 10mm OD Tee Pipe Adapter for Garden Water Irrigation System

Fitting Tube Size: 10mm / 0.39" Outer Diameter (O.D.).
Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
NOTE: Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..

Check Stock