ReviewsBrass Double Tap

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Kegco Tap Conversion Kit, Chrome

  • turn your single tap kegerator into a multli-tap kegerator with kegco's easy-to-install add-a-tap kit.
  • comes with all of the beer parts needed to successfully add an additional tap to your draft beer dispenser.
  • includes stylish and nsf-approved kegco chrome beer faucet with brass lever.
  • includes a 4-1/8 long chrome beer shank".
  • includes a lever handle kegco kt85d-l d" system beer keg coupler".
  • Included components: faucet, beer line, air line, clamps, shank, keg probe.
Check Stock

Ace Case Ambidextrous Tuckable Inside The Pants Holster for Ruger LCP- Made in The USA (Black)

  • Starline Brass is known for it's quality and consistency..
  • Ambidextrous Leather Holster for Ruger LCP.
  • Fits Glock 42, Double Tap, and Small 22-25 Autos (JFrame, Keltec 32/380, Ruger LCP, Beretta 22/25/32).
Check Stock

Aupoko R134A Self-Sealing Can Tap with R134A Tank Adapter and Valve Core Remover 1/4’’ SAE Valve Refrigerant Dispenser with 1/4’’ Female and 1/2’’ Male Adapter for Air Conditioner Manifold

  • ❄ WIDE COMPATIBILITY --- The R134A self-sealing can tap refrigerant dispenser with tank adapter, connects all R134A automotive air conditioning....
  • ❄ R134A SELF-SEALING CAN TAP VALVE --- This R134A pro ac can tap valve designs with hand operated punch/valve control, it can only be used for....
  • ❄ USEFUL TANK ADAPTER --- The R134A car air conditioning tank adapter comes with 1/4" SAE female x 1/2" male flare, connects to R134A manifold..
  • ❄ PREMIUM QUALITY --- This R134A refrigerant self-sealing can tap with adapter is made of heavy-duty brass alloy for durable using, with screw-on....
  • ❄ 1 YEAR WARRANTY --- This R134A freon can tap with brass tank adapter comes complete with 12 months warranty. If the dispensing valve fails or any....
Check Stock

Kegco 3PDCK-5T Kegerator Kit, 1-Tap, Chrome

  • Kegco conversion kit includes elegantly designed NSF-approved Kegco chrome beer faucet with brass lever.
  • Commercial grade Kegco double gauge regulator with T-style adjustment valve easily sets output pressure.
  • Kegco KT85D-L D system keg coupler makes it easy to tap all North American D System kegs.
  • 6" stainless steel wall mount drip tray collects spills and can be easily detached to clean.
  • Heavy duty faucet wrench features vinyl coated handle for a secure grip and for easy removal of the faucet.
Check Stock

Kegco 3P2SCK-5T Kegerator Kit, 2-Tap, Chrome

  • Commercial grade Kegco double gauge regulator is durably built to ensure the perfect pour.
  • Kegco KT85D-L D system keg couplers easily tap all North American D system Sankey kegs.
  • Two high-quality Kegco chrome plated brass faucets upgrade the look of your kegerator and ensure perfect flow.
  • Durable metal beer faucet wrench allows you to loosen or tighten shank collars without damaging your faucets.
  • Included in the kit is a lightweight 5 lb. CO2 Tank made from high strength aluminum alloy.
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • DUAL GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threa....
Check Stock

Garden Hose Splitter 2 Way - Heavy Duty Solid Brass Hose Y Splitter，Hose Faucet Splitter,3/4\ Brass Hose Adapter Connectors Shut Off Valve, Hose Spigot Adapter 2 Valves, Plus 4 Extra Rubber Washers.

  • Heavy Duty Brass Garden Hose Connector Tap Splitter ：100% solid brass make the Y splitter durable, heavy duty brass hose connector support up to 0.8 MPa water pressure， and can work normally under various harsh environments and weather conditions such as high temperature, high humidity, and high pressure. Solid and durable, corrosion proof and has a long service time..
  • Y Splitter 2 Valves ： Instantly create two tap outlets with this ultra-durable hose splitter 2 way connector and eliminate the stress of constantly switching out hoses. 2 Way Brass Hose Splitter with 2 shut off valves to control water flow separately and easily. Extra 4 rubber washers included to prevent the hose connector from leaking..
  • Easy to connect Garden Hose Splitter ：This water hose splitter allows two 3/4’’ hose tap connectors to be connected without the need of tools, easily accommodate all standard hoses.The 360°rotatable top connector adds convenience for both installation and adjusting hoses to a desired direction,with standard 3/4 inch male threaded swivel connection, working perfectly with any 3/4" garden hose thread spigot or hose connection..
  • Adjustable Water Flow Control : 2-way garden hose connectors are equipped with high-quality ball valves.Just adjust th....
Check Stock

R134a to R1234yf Quick Adapter Air Conditioner High/Low Side R134a to R1234yf Conversion Kit R134a to R1234yf Connectors with R1234YF Can Tap Valve-Self-Sealing for AC R1234yf Refrigerant System (A)

  • 【R1234YF TO R134A CONNECTOR KIT】The brass r134a to r1234yf adapters set comes with 1pcs high pressure r1234yf quick coupler (16mm),1pcs 1pcs low pressure r1234yf quick coupler (14mm),1pcs self-sealing style R1234YF can tap(Left Hand Threaded), a practical kit and convenient for you to use.
  • 【NO LEAKAGE DESIGN】 The r134a to r1234yf quick convert coupler is designed with a ball latch and green rubber seal ring for providing excellent sealing performance, R1234YF can tap valve connection parts adopt precise fine thread design, and the interface is also equipped with high-quality thick rubber seals to ensure safety.
  • 【SELF SEALING R1234YF CAN TAP VALVE】The self-sealing R1234YF can tap is used for self-sealing R1234YF refrigerant cans, for automotive air-conditioning R1234YF refrigerant systems to refill the refrigerant. R1234YF refrigerant is more environmentally friendly and more economical.
  • 【HEAVY-DUTY BRASS MATERIAL】The r134a to r1234yf quick couplers and self-sealing R1234YF can tap valve are made of strong premium brass, long-lasting, featuring H/L temperature resistance and corrosion resistance, which makes the r134a to r1234yf adapters stronger and more durable, also for longtime lasting without any damage under extreme conditions, serv....
Check Stock

Tiny Home for Military Couple

  • ...aft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M6 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. Directly installing on a kegerator dispenser would be easier, no drills ....
Check Stock

Dual Tapper Electric Handheld Percussion Massager by Fatherland Shop

  • ...aft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M5 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. Directly installing on a kegerator dispenser would be easier, no drills ....
Check Stock