ReviewsBrass Electric Ball Valve

Harvard Boshart 1 x 11 BRASS Tank Tee Kit installation package with BALL VALVE and CHECK VALVE Water Well Pressure Tank SQUARE D 4060 FSG2 pressure switch NO LEAD

(1) 1" x 11" Tank Tee(SOLID BRASS, NO LEAD CONSTRUCTION).
(1) Square D 30-50 Pressure switch, 40-60 available in other listing.
(1) 1/2" 100 psi Brass Pressure Relief Valve.
(1) Roll of 3/4" x 520" 3.5 mils Thread tape.

Check Stock

Ariston 6 Gal POU Electric Water Heater

Compact designed 6 Gal. electric water heater.
Durable glass-lined heavy gauge carbon steel tank that tolerates high temperatures for years of trouble-free service.
Immersed screw-in heating element transfers heat directly to water, offering maximum recovery efficiency and direct, 98% heat transfer, maximum temperature capability of 160°.
Recommended circuit breaker size: 15 Amp.
Glass-lined heavy gauge carbon steel tank.
Energy-saving and environmentally friendly HFO foam for better heat insulation and low GWP.

Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

...male BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
【 Easy to Use 】 Ball valve for foam cannons withstand high pressure operation while providing good leverage, opening and closing pressure washer ball valve effortlessly, allowing safe and easy tool replacement. Helps you switch easily without shutting down the entire system, making your work easier and more convenient..

Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

...m the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with dif....

Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
This minimizes pressure loss through the valve.
9V-24V AC/DC- Works effectively over entire voltage range.
Limit switch minimizes power after valve is fully open.
Ideal for projects where an automatic return is necessary.
2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
Returns to fully closed if power is removed.
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.

Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/4" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

...it up and down about an inch. In just seconds the siphon hose is full and flowing. A siphon only works if the outlet end is lower than the inlet and the liquid is deep enough to jiggle the ball..
♠PREMIUM QUALITY MATTERIAL: Siphon pump for gasoline with thick hose wall, it can endure long time use with no crushed. Brass nozzle, PVC tube and industrial strength glass ball make it anti-static and safe for gasoline oil fuel diesel transfer..
♠NYLON TIGHTEN BAND: Gas siphon with a nylon tighten band on brass valve end, you don't worry that the copper head come off from the tube and go into your car oil tank. Before use, please pull the nylon zip tie to keep the brass valve more tightening. Don't pull it out by force..
♠WIDELY USE: Our syphon hose kit efficiently transfers gasoline, diesel, water, oil and urea for car on the go without electricity. Perfect for small household chores, lawn and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purchasing and ensure suitalbe fitting, no smaller than our hose and brass valve size.....

Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
This minimizes pressure loss through the valve.
9V-24V AC/DC- Works effectively over entire voltage range.
No power expended once fully open or fully closed.
3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.

Check Stock

Beduan 12V Plastic Water Electric Solenoid Valve Normally Closed 1/2

Voltage: DC 12V. Thread Size : 1/2" G. Working Temperature : 32-212°F ,Working Pressure : 0.01~0.8Mpa.
The electric solenoid valve is made of high quality plastic and brass material, with long serving life ..
If your central heating or irrigation sprinkler system isn't working correctly it could be down to the solenoid valve. Repair a faulty valve with this brand new, fast acting 12V DC diaphragm-style replacement..

Check Stock