Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome
- Fits 5/16 inch and 3/8 inch inside diameter fuel line.
- Not for fuel injected systems, Max inlet pressure 9 PSI.
- Adjusts fuel pressure from 1 to 6 pounds.
ReviewsBrass Fittings
WADEO Rain Barrel Spigot, Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting-Black
- Two installation methods: Brass bulkhead fittings front mounting and back mounting. Designed for irrigation with Rain Barrel, Not for Portable Water, Not Lead Free Compliant..
- Heavy Duty 3.2 oz Solid Brass Bulkhead Fitting, 1/2" Female to 3/4" Male water tank connector bulkhead tank fitting. Heavy duty 3/4"water outlet no kink quarter turn solid brass ball valve can conntect with garden hose.
- Bulkhead fittings need 1 inch diameter holes to install. Fit up to 0.78 inch thickness wall..
- Tools Needed for Installation: Electric drill, 1 inch hole saw, and pipe wrench or adjustable wrench..
- Two washers (6.8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage..
BELEY 1/2 Inch & 3/4 Inch Olive Remover Puller Tool Removal Tool Solid Brass Copper Pipes Fitting Compression Fittings Thread Tool Puller Metric Handle Nut
- US 1/2 Inch & 3/4 Inch Ferrule Removal Tool: The olive puller is suitable for any solid brass pipe fittings with a diameter of 15mm and 22mm. Solid....
- Main Function: The olive puller uses a compression fitting to lock the nut, and takes out the used or damaged olive from the copper pipe without....
- High-Quality: The copper pipe fittings are made of solid brass. The high-quality brass makes the product sturdy and durable, with high strength, high....
- Easy to Use: The olive removal tool can remove most olives and can also increase torque, which is appropriate for various tasks. And the operation is....
- After Sales Service: We provide 7X24h service. If you have any questions about this brass tube, please feel free to reach us via email..
1/8\ Compression Union Brass Tube Fitting, 1/8\ OD x 1/8\ OD, 5pcs
- Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
- Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Fire Hydrant Adapter, 2-1/2\ NST (NH) Female x 2\ NPT Male Brass Fire Hose Hydrant Adapter with Pin Lug Fire Equipment Fitting Nipple for Fire Hydrants, Hoses, Pipes
- 【Size】Brass fire hydrant adapters with 2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 2’’ NPT male on the other end for connecting to a hose. Perfect for attaching to fire hydrant..
- 【Material】Brass fire hydrant fitting is made of brass for corrosion resistance, ductility at high temperature and low magnetic permeability, they are more heat-resistant than aluminum rigid fire hose and hydrant adapters..
- 【Easy Operation】Brass fire hose adapter with pin type lugs for quick connect and disconnect, easy to use. These fittings will not rotate as a hose is moved, making them less likely to loosen or break than swivel adapters..
- 【Application】Brass fire adapter fittings used for connecting fire hose, pvc pipe and other low pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military and civil protection..
- 【Quality Warranty】We did 100% inspection before these brass fire hydrant adapter leave our factory, if you have any problem with these products after you receive them, please feel free to contact us, we will give you a solution..
TL TOOLEGIN Brass Hose Barb Fitting Union/Splicer/Mender/Joiner Assortment Kits 3/16 1/4 5/16 3/8 1/2 5/8 Barbed x Barbed 6pcs
- For use with LP and natural gas, refrigeration, and hydraulic applications.
- Temperature control circuits,pneumatic circuits,cacuum and fluid systems test apparatus,lubricant,coolantlines, Temperature range of -40°F to 160°F (-53°C to 121°C).
- CA360 Brass fittings,CA377 Brass for forged fittings.Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037
- BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
- Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
- Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
- Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
- Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Hourleey Brass Rain Barrel Quarter, Rain Barrel Spigot Kit 1/2 inch, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting
- High quality: Heavy-duty solid brass bulkhead fitting, screwed along the 1-1/8 inch internal thread all the way, with spigot installed at both ends. Heavy-duty 1-1/8 inches, no kinks, right-angle rotating solid brass ball valve..
- Two installation methods: Front mounting and rear mounting of brass bulkhead fittings..
- Applicable scenarios: Bulkhead fittings need to be installed with 1-inch diameter holes, suitable for the case where the wall thickness does not exceed 1.3 inches..
- Tools required for installation: Electric drill, 1-1/8 inch hole saw, pipe wrench or adjustable wrench..
- Intimate help: For helping you easily install the rain barrel quarter and effectively prevent leakage, we provide a gasket..
SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps
- 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
- 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
- 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
- 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
- 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack
- 【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
- 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
- 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
- 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
- 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.
BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings
- [Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
- Use to evacuate a flooded yard, pump out water from a barrel, and more.
- [Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
- Fittings designed to fit standard garden hose spigot.
- [Use Your Pump]: Threaded brass ends for use with your water pump.
- Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
- [No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
- [Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.